nulea M501 Wireless Trackball Mouse User Manual

nulea M501 Wireless Trackball Mouse

Product Features

1. Trackball
2. DP Switch Key
3. Move Backward Key
4. Move Forward Key
5. SaollWheel
6. Lef!Key
7. Right Key
8. Mode Key
9. BT1/2Mode
10. 2.4GMode
11. ON/OFF Button
12. USB Receiver
13. Non-slip Rubber

Specifications

Package Content

1. 1 * Wireless Trackball Mouse
2. 1 * User Manual

Bluetooth Connection

Windows Systern(Take Windows 10 as an example)

1. Tum on the mouse.
2. The default mode is BTI and the LED flashes slowly.
3. Long press the switch button for 3-5 seconds until the LED flashes quickly. The mouse will be in Bluetooth pairing mode.
4. Click the “Bluetooth devices” button on the computer.
5. Click the “Add or remove Bluetooth devices” button.
6. Search the Bluetooth UBTS.0 Mouse” /”BT3.0 Mouse”, and click the Pairing button.
7. When the Bluetooth ·sTS.O Mouse· /”BT3.0 Mouse· is connected, the mouse is ready to use.

Mac OS System

Please operate the Bluetooth installation steps(l-3) before pairing.

1. Click the •system preferences” button on the Mac
2. Click the Bluetooth button on the system preference folder.
3. Search the Bluetooth “BTS.0 Mouse• rBT3.0 Mouseu, and click the Pairing button. If installed completely, the mouse could be used normally.

2G Connection

1. Turn on the mouse, Shortly press the mode switch button to the USB mode, and the LED flashes slowly.
2. Take out the USB receiver.
3. Insert the USB receiver into the computer USB port
4. The mouse is ready to use.

Mode Switch

When 2.4G or Bluetooth connect successfully, shortly press the switch button at the bottom of the mouse, and you could switch the modes easily. The LED light goes out after pairing successfully.

Important Safety Instructions

Please Note: Long-term repetitive use of any keyboard and mouse could cause injury to user. We recommend users to avoid excessive use of this or any keyboard and mouse.

1. Avoid Dropping.
2. Do not disassemble.
3. Do no expose to liquids.
4. This product is suitable for moderate climates only.
5. The maximum ambient temperature during use of this product must not exceed 4Odegree.
6. Open flame sources, such as candles, must not be placed on this product.
7. Only use a dry cloth or brush to clean this product.

Correct Disposal of This Product

(Waste Electrical& Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should not  be disposed with other household wastes at the end of its working life. To prevent possible harm to the envir onment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household user should contact either the retailer where they purchased this product or their local government office. for details of where and hew they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purdiase rontact This product should not be mixed with other commercial wastes for disposal
CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park,
Email: info.cetservice,aigmail.com
Phone: +447419325266
UABQixiangEurope
Francisco,! g. 6-46, LT -01133 Vilnius, Lithuania Technical Information Center
Trakehner Str. 7-9, 60487 Frankfurt am Main, Germany Email: qixiang.europe@gmailcom
Phone: +496976895074

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES 3

This radio transmitter (ISED certification number: 28411-M501) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>