tekkiwear J11 Wireless Microphone User Manual
- July 23, 2024
- TeKKiWear
Table of Contents
J11 Wireless Microphone
User’s manual
Introduction
Thank you for choosing our product. This product is a smart wireless microphone that provides professional quality recording output. It is “Plug and play”, which means it does not require you to install any app on your mobile.
Multiple uses: it can be used in online live broadcasting, video shooting for your Vlog, program interviews, recording, tutorial videos and other occasions. This product consists of three parts: charging box, microphone transmitting end and receiving end (as shown in the figure below, some models might not have charging box, the actual item might vary a little from what shown in the picture).
- Charging box
- Transmitter microphone
- Receiver
Identification diagram
- Windproof net
- Microphone indicator
- Microphone Type-C charging port
- Clamp clip.
- Switching button
- Type-C port to connect to the phone
- Receiver indicator
- Receiver
- Charging box indicator light
- Type-c charging port on the box
How to use
Step 1: Connect the receiver to the phone port.
Step 2: Press the microphone switch key, the indicator light shows green, and then the power is turned on.
A. Switch key
Step 3: Now the green indicator light on the receiver is always on; open the phone’s camera, live application or other applications and use the microphone to pick up the sound.
B. Green light indicator always on
Special note: For port usage: If the phone is low on power during a live stream, it can be charged directly through the Type-C port.
Function, button and LED indicator
Microphone transmitter:
Power On: Press the power button for 3 seconds, the led light will turn
on alternately red and green.
Off: Press the power button for 3 seconds, all lights will turn off as
well.
Unpairing: the led light will turn on alternately red and green.
Connection: Insert the device into the phone port and turn on the power.
Change the noise reduction level: Press the button to choose one of the 3
levels:
Level 1: Green light flashes once.
Level 2: Green light flashes twice.
Level 3: Green light flashes three times.
Reverberation: Click the button 3 times to turn on the mode; the green
light turns off, the red light flashes once and then the red light stays on.
Silent mode: Double click to mute the microphone and double click again
to reset the volume; the green light flashes and the red light turns off.
Charging: Charging: red light turns on and green light turns off; when
charging is complete, all lights turn off.
Low battery: red light flashes every 10 seconds.
Receiver:
On: Insert the device to the phone port and turn on the power, red light
flashes.
Off: Remove the device from the phone port.
Unpaired to receiver: red light flashes.
Connection: Red light stays on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>