DIGITUS DS-55332 4K HDMI Switch Installation Guide

DIGITUS DS-55332 4K HDMI Switch

Specifications

• Description: 4K HDMI Switch, 5×1
• Video Inputs: 5x HDMI
• Video Output: 1x HDMI
• Vertical Frequency Range: 50/60Hz
• Video Bandwidth: 6.0 Gbps / 600MHz per channel, 18 Gbps all channels
• Interlaced Resolutions: 480i, 576i, 1080i
• Progressive Resolutions: 480p, 576p, 720p, 1080p, 4K@24/30Hz, 4k@50/60Hz
• Operating Temperature: 0 to 70°C
• Storage Humidity: 5% to 90% RH non-condensation
• Power Supply: Micro USB cable
• Power Consumption (Max): 5W
• Dimension (LxWxH): 160 x 62 x 14.2mm
• Net Weight: 214 g
• Material: Metal

Product Usage Instructions

Powering On and Off

To turn on/off the switcher, press the Power button located on the panel description.

Selecting Input Source

Press the corresponding number (1-5) on the panel description to select the input source.

Switching Modes

• Short press the Select button to change the input channel.
• Long press the Select button for 3 seconds to switch between manual and automatic switching modes.

Troubleshooting

If you encounter issues such as the power light being off, no signal output, or the remote control not working, refer to the troubleshooting section in the manual for possible solutions.

FAQ

• Q: What should I do if the power light is off and the product is not working?
• A: Check if the power supply is connected properly and try a different power source if needed.
• Q: How can I switch between manual and automatic switching modes?
• A : Long press the Select button for 3 seconds to toggle between manual and automatic switching modes.
• Q: Why is there no signal output on the screen?
• A : Ensure that the HDMI cable is compliant with HDMI 2.0 specifications and is not too long. Check the connections and try a different cable if needed.

Introduction

The DIGITUS® 4K HDMI Switch, 5×1 offers additional HDMI connections for your output display – 5 signal sources can be connected using just 1 HDMI connection on the screen. The video changeover switch is supplied with power via the Micro USB cable, e.g. via the source device or a USB charging adapter. Switch conveniently between the signal sources via remote control, on the device itself or via automatic recognition. Perfectly suited for use with wall installation of TV – only a HDMI cable is required to connect the sources.

Main Features

• Switch conveniently between 5 signal sources via remote control, on the device itself or via automatic recognition
• Additional HDMI connections for your output device – 5 signal sources via just 1 HDMI connection/cable on the screen
• Power supply via Micro USB cable (included)
• Max. resolution: 4K/60Hz
• Video bandwidth: 18 Gbps
• Supports High Dynamic Range (HDR)
• Supports HDCP 2.2
• Supports Consumer Electronics Control
• Supports Deep Color (36-bit)
• HDMI 2.0

Package Content

• 1x HDMI Switch
• 1x remote control (2x AAA batteries, not included)
• 1x Micro USB cable (0,7 m)
• 1x QIG

Technical Features

18 Gbps all channels

Interlaced Resolutions| 480i, 576i, 1080i

Progressive Resolutions

| 480p, 576p, 720p, 1080p,

4K@24/30Hz,

4k@50/60Hz

Operating Temperature| 0℃ to 70℃
Storage Humidity| 5% to 90% RH non-condensation
Power Supply| Micro USB cable
Power Consumption (Max)| 5W
Dimension (LxWxH)| 160 x 62 x 14.2mm
Net Weight| 214 g
Material| Metal

Panel Description

3.      DC/5V:

DC 5V Input via Micro USB port

4.      OUTPUT: HDMI Output

| 9.     IR Mode LED Indicator:

–           ON: IR receiver mode activated

–           OFF: IR function de-

activated

---|---
5.      INPUT 1-5: HDMI Input

6.      Power LED Indicator:

–        Red LED indicates:

“Standby mode”

–        Blue LED indicates:

“Working mode”

–        No LED indicates: “No Power supply connected”

7. 1/2/3/4/5: Input Port 1/2/3/4/5 LED Indicators

–        Blue LED indicates:

“Active input signal”

–        No LED indicates:

“No input signal”

8. Auto Mode LED Indicator:

–        ON: is in Automatic Switching mode

–        OFF: is in Manual Switching mode

| ****

10.      IR: IR signal receiver port

11.      Select button:

–           Short press to change the input channel; and long press the selector button till 3 seconds to change the manual switching or automatic switching mode

–           Auto mode LED indicator:

on for automatic switching mode and off for manual switching mode

–           Turn on/off the IR receiver mode: if long press the selector button for 6 seconds to turn on/off the IR

receiver mode

---|---

Connection Diagram

Troubleshooting

source or, if necessary, to a USB charging adapter via

a socket

No signal output on the screen| The HDMI cable may not comply with the HDMI 2.0 specification or is maybe too long| Please use at least a High Speed HDMI

2.0 cable that does not exceed the maximum length of the input/output cable of 5 m for 4K/60Hz (4:4:4) or 10 m for 4K@30Hz /

1080p

The remote control is not working| The cover between the battery and the remote control may not have been removed or the IR receiver function and the IR receiver display may be switched off| Please remove the plastic parts first and check whether the IR receiver indicator is switched on or not. You can change the status by pressing the remote control button or by pressing and holding the toggle button for 6s to turn on the

IR receiver function

Disclaimer
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below-mentioned manufacturer address.

CONTACT

• www.assmann.com Assmann Electronic GmbH
• Auf dem Schüffel 3 58513 Lüdenscheid Germany

References

• ASSMANN Electronic GmbH | Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>