KSIX BXPLAFLED03 Boreal Smart LED Ceiling Light User Manual
- June 13, 2024
- KSIX
Table of Contents
KSIX BXPLAFLED03 Boreal Smart LED Ceiling Light
Product Information
The LED ceiling light is a versatile lighting solution that offers various features and functionalities. It comes with a remote control, screws, wall plugs, and a user manual. The product is designed to be installed on the ceiling and can be controlled using the iLink app.
Installation Method
- Rotate the upper part of the ceiling light to the left to separate it from the lampshade. Pull the chassis upwards.
- Secure the chassis on the ceiling using the included nails. Connect the power cords of the ceiling light to the power cords on the light spot where you will be installing it.
- Place the lampshade on the chassis and rotate it to the right to fix it securely.
INSTRUCTION
- BOREAL – BXPLAFLED03
- RGBIC LED ceiling light – User manual
Technical specifications
- Rated power : 52,2W
- Power: 72W
- Input voltage: 170-265V / 50-60Hz
- Luminous flux: 5.600 modular lm
- Energy efficiency class: F
- LED color: RGBIC + CCT
- Light temperature: 3.000K – 6.500K
- CRI index : 80
- Number of LEDs: 75
- Lifespan: 30.000h
- Lightning angle: 120°
- Protection rating: IP42 (dust and water drops proof)
- Operating temperature: -20°C to +60°C
- Dimensions: 38,5 cm diameter x 6,7 cm thick
- Weight: 640 g
- Material: Acrylic + Metal
- Connectivity: Bluetooth 4.0
- Compatibility: Android 4.4 / iOS 9.0 and later versions
- App : iLink
In the box
- 1 x LED ceiling light
- 1 x Remote control (works with 2 x AAA batteries, not included)
- 4 x Screws
- 4 x Wall plugs
- 1 x Manual
Product parts
Installation method
To install the LED ceiling light, stick to the following instructions:
- Rotate the upper part of the ceiling light to the left to separate it from the lampshade. Pull the chassis upwards.
- Secure the chassis on the ceiling with the nails that are included in the package. Link the power cords to the power cords on the light spot in which you will be installing the ceiling light.
- Place the lampshade on the chassis and rotate it to the right to fix it. Make sure that it is correctly fixed.
Safety note : Don’t modify the product or exchange any parts. Cut off your home’s power installation to avoid electric shock while installing it and manipulating it. Do not cover the product once it is installed and connected to the power. Do not install the product on top of high-heat objects or in a wet place.
Download the app
The Boreal LED ceiling light compatible app is called iLink.
There are two ways to download it:
- Tap here to download the iLink app from Google Play or App Store.
- You can also download the app directly by typing “iLink” in the Google Play or App Store search engine.
Pairing iOS / Android devices
To complete the pairing, the ceiling light must be properly installed and
powered on.
- First, and most importantly, make sure to have your smartphone’s Bluetooth enabled.
- Access the iLink app. Once inside, tap on the menu button in the upper left corner.
- Tap on the Bluetooth connection.
- Once inside, tap on the magnifying glass icon to start searching for the device. The device will appear as “iLink”. Tap on it to complete the pairing.
Troubleshooting: If the app cannot find the device, power off the panel and then on again. Make sure that your smartphone’s Bluetooth is on and accept all the permissions requested by the app.
App use
The iLink app is very simple and intuitive to use. As previously stated, make
sure to accept all the permissions that pop up to use all the app functions.
RGBIC control
Tap on the bottom left lamp icon to access the RGBIC control feature. From
here, you will be able to adjust the brightness, as well as choose the colors
that you want the ceiling light to display.
CCT whites’ control
Tap on the flame icon on the bottom of your screen to access the CCT whites’
control. From here, you will be able to adjust the whites color temperature,
as well as the brightness. You will also be able to choose from a variety of
preset color features.
Scene modes
Tap on the last bottom icon to access the scene modes feature. From here, you
will be able to choose from a wide variety of preset scene modes that combine
unique colors and patterns. Tap on the one that you desire, and the ceiling
light will automatically display it. You will be able to set up to 3 scene
modes.
Scheduling
To set schedules tap on the menu button on the upper left corner. Then, tap on
the timer set.
Once inside, activate the auto light option by tapping on the switch to the
right. You will then be able to choose the turn-on and the turn-off lighting
time of the ceiling light. Tap on open time and choose the time that you want.
After that, tap on close time and choose the time that you want.
The ceiling light will automatically light on and light off in the time interval that you have set.
Shaker
Access the shaker function by tapping on the upper right icon showing a hand
with a phone. Once you have accessed it, this function allows you to change
colors and patterns by just shaking your phone
Remote control
The ceiling light includes a remote control to also be able to make use of the panel without the need of a phone. Even though the iLink app is more complete, the remote control use is handier and more practical in most situations. These are the functions of the buttons:
- ON/OFF button: Press this button to turn on or off the ceiling light.
- CCT modes switch: Press this button to switch between different preset white’ temperature color combinations of the ceiling light.
- RGBIC modes switch: Press this button to switch between the different RGBIC preset color combinations of the ceiling light.
- Color temperature down: Press this button to decrease the white color temperature of the ceiling light.
- Increase brightness: Press this button to increase the brightness of the ceiling light.
- Night light mode : Press this button to activate the night light mode.
- Decrease brightness: Press this button to decrease the brightness of the ceiling light.
- Color temperature up: Press this button to increase the white color temperature of the ceiling light.
- Brightness options: Press this button to choose between 25, 50, and 100% brightness of the ceiling light.
- Color temperature options: Press any of these buttons to set a different white temperature.
Warnings
- Please, strictly follow this user manual to install and use the product to avoid accidents.
- Do not disrupt the bulb or modify any component.
- Turn off the power and the main electrical panel before installing or doing maintenance tasks to avoid damage from electric shock.
- Do not install the lamp on unstable or unsafe ceilings.
- Do not cover the lamp with blankets or similar objects.
- Do not handle the bulb or any other lamp component for installation, repair, or checking unless you are a qualified electrician. Wire connecting must follow the IEE electric standard or any other valid national standard.
- Do not install the lamp above hot or wet surfaces
Maintenance recommendations
- Regularly clean the product with a dry cloth. The product must be disconnected or switched on when you clean it.
- Keep the connectors and/or ports free from dust, lint, etc. to prevent improper connections.
- Avoid breaking the device. Do not put objects over it or bend it too strongly.
- If the product includes a cable do not bend it too strongly and do not pull from it to unplug the product.
- Do not wet the product. Keep it always in a dry place, away from humidity.
- When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
- If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
- Avoid dropping or hitting the product. It might be damaged.
- Do not use the product for anything other than its intended use.
- Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
- When you use a device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
- If the product is wet or damaged do not use it.
- Do not use the product with wet hands.
- Do not leave the product in contact with flammable materials.
- Do not expose the product to high temperatures (for example: inside a car during hot weather)
- Do not throw the product into the fire.
- Keep the product away from children.
- Disconnect or switch off the product if you are not going to use it for a long period of time.
- Do not use the device if you perceive any visible defects.
- Do not attempt to open or puncture the product. You might damage it.
- Do not use the product with incompatible devices.
- Do not dismount or modify the product. These actions will invalidate the Warranty.
Legal Note
- Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
- The features and functions described in this manual are based on tests made by Atlantis
- Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economic loss, material loss, or any damage due to misuse, abuse, or improper installation of the product.
- For electronic devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth-enabled devices.
Electronic and electrical device disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of it as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed of in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
- For more information, contact the retailer or the local authorities in charge of waste management.
Certificamos que el producto descrito a continuación es conforme con el marcado CE y la directiva RED, de acuerdo con las siguientes normas europeas.
- ETSI EN 300 328 v2.2.2 (2019-07)
- En 62479: 2010
- EN 50663:2017
- ETSI EN 301 489-1 V2.2.3 (2019-11)
- ETSI EN 301 489-17 V3.2.4 (2020-09)
- EN IEC 60598-2-1:2021
- EN IEC 60598-1: 2021
Artículo/Article/Artigo: BXPLAFLED03
- EAN: 8427542130781
- Fabricante / Manufacturer/ Fabricante: ATLANTIS INTERNACIONAL, S.L.
- Dirección / Address / Endereço: Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Lugar y fecha de declaración /Place and date of the declaration / Lugar e data da declaração L’Hospitalet de Llobregat, 21 de julio 2023 / July, 21th 2023 / 21 de julho de 20
Nico Broder General Manager
Documents / Resources
| KSIX
BXPLAFLED03 Boreal Smart LED Ceiling
Light
[pdf] User Manual
BXPLAFLED03 Boreal Smart LED Ceiling Light, BXPLAFLED03, Boreal Smart LED
Ceiling Light, Smart LED Ceiling Light, LED Ceiling Light, Ceiling Light,
Light
---|---