JSP1860 Jeep Armor Lite Skid Plate Pair Instructions

: June 13, 2024
: ARMOR

Table of Contents

JSP1860 Jeep Armor Lite Skid Plate Pair
Maintenance
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

ARMOR LITE SERIES
JK/JL

JEEP JK/JL ARMOR LITE SKID
PLATE PAIR

WEB LINK: http://lodoffroad.com/assets/pdfs/JSP1860JKJLArmorLiteSkidPlatePair.pdf

JSP1860 Jeep Armor Lite Skid Plate Pair

VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST

Loosely assemble the supplied Flat Head Screw and T-Nut into all 4 positions on the Armor Lite Skid Plate as shown.

Position the Skid Plate on the Armor Lite Slider so the T-Nuts are inserted into the T-Slot on the bottom of the Slider.

Using a Allen wrench, turn each Flat Head Screw 90° clockwise so that the shoulder on the T-Nut catches on the T-Slot as shown below.
With the T-Nut in this position, you will be able to fully tighten the Flat Head Screws.

The Skid Plate should now be able to hang loosely on the bottom of the Slider.
Position the Skid Plate forward or backward as needed to center it on the bottom of the Slider, then fully tighten each screw equally.

Maintenance

Periodically check and re-tighten all fasteners.
Periodically check your Armor Lite Skid Plate for scratches or dings which can happen over time or after heavy use or highway driving. It is important to address these areas as soon as possible to prevent flaking and corrosion or rust from spreading. We recommend using Rustoleum© brand Black Semi-Gloss Protective Enamel (oil based). Remove loose powder coating, sand the area and clean using alcohol. Apply using a foam brush by dabbing to match the powder coat texture.

ITEM NO.	PART NUMBER	DESCRIPTION	QTY.
1	2JSP1860-01	JK/JL ROCK SLIDER SKID PLATE 4DR	2
2	FHSCS142008CZ	FHSCS 1/4-20 X .50 CZ	8
3	TN2520-1	T-NUT 1/4-20, DROP IN, ZINC PLATE	8
4	FW2512ZP	FLAT WASHER 01/4″ X .75 ZINC PLATE	8

NOTES:

JSP1860 = BARE STEEL
JSP1861 = BLACK POWDER COAT

UNLESS OTHERWISE SPECIFIED:		NAME	DATE	LOD LLC.

DIMENSIONS ARE IN INCHES TOLERANCES: ±0.010 ANGULAR: MACH +1 ° TWO PLACE DECIMAL +0.015 THREE PLACE DECIMAL 10.005
DRAWN| MCH| 1/21/2022
CHECKED| | | DESCRIPTION:
JEEP JL 4DR ARMOR LITE SKID PLATE
ENG APPR.| |
MFG APPR.| |
PROPRIETARY AND CONFIDENTIAL THE INFORmATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LOD LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LOD LLC IS PROHIBITED.| MATERIAL:
N/A
DWG. NO. JSP1860
ISP1861| REV
B
FINISH:
SEE NOTES
ECO:
1067
SCALE: 1:6| SHEET SIZE: B| SHEET 1 OF 1

SKID PLATE PAIR SHIPPING SHEET
Packaged by:
On:

SKID PLATE PAIR BOLT KIT
Packaged by:
____
On:

JSP1860 – REV 2

Documents / Resources

| ARMOR JSP1860 Jeep Armor Lite Skid Plate Pair [pdf] Instructions
JSP1860, JSP1861, JSP1860 Jeep Armor Lite Skid Plate Pair, JSP1860, Jeep Armor Lite Skid Plate Pair, Armor Lite Skid Plate Pair, Lite Skid Plate Pair, Skid Plate Pair, Plate Pair, Pair
---|---