PRO ARMOR Polaris RZR XP1000/2015 900S Rock Sliders Installation Guide
- June 3, 2024
- PRO ARMOR
Table of Contents
PRO ARMOR Polaris RZR XP1000/2015 900S Rock Sliders
TOOLS
Begin by removing any dirt/obstructions that may interfere with the
installation of the rock slider. Make sure all of the mounting holes and
surfaces are clear.
Assemble the supplied expansion anchors [ITEM 1] with the rock slider as shown above. Insert the bolt, washer, and sleeve into the mounting hole first. The flat surfaces of the sleeve of the expansion anchor should fit into the groove in the mounting hole of the rock slider. Then, thread the nut on the back side, against the fingers of the sleeve. The flat sur- faces of the nut should fit into the groove in the sleeve and create a snug fit.B
ASSEMBLING
Place the rock slider with the expansion anchors onto the vehicle. Make sure the sleeves of the expansion anchors are still seated properly in the grooves in the mounting holes of the rock slider before you proceed to tighten the anchors. Apply constant inward pressure on anchors as you tighten. It may be helpful for another person to hold the rock slider in place while you go around and evenly torque down the three anchors. DO NOT OVERTIGHTEN as you may shear the bolt in the expansion anchor
Repeat steps for other side. Installation is now complete
TO O L S REQUIRED
1/4” drive ratchet, 6 in. extension, & 13mm socket.
HARDWARE KIT
WARNING: Make sure all hardware and components are secure before operating vehicle. Damage to vehicle can occur from improper installation or poor maintenance
Please read : This product is sold without warranty expressed or implied. No warranty or representation is made as to the prod- ucts ability to protect the user / occupant from any injury or death in any manner of use. The user assumes that risk. The effec- tiveness of this equipment is directly related to the manner in which it is installed, used, and / or maintained. Proper installa- tion is solely the responsibility of the installer, and will not be assumed by Pro Armor
For further information on installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact customer service at 1-888-31-ARMOR