BLAUPUNKT ACF601 Air Cooler Instruction Manual
- June 5, 2024
- Blaupunkt
Table of Contents
ACF601
Instruction Manual
Enjoy it
Air cooler
Efficiency information
ACF601
Description| Symbol| Value| Unit
Maximum fan flow rate| F| 8,0| m3/min
Fan power input| P| 108,5| W
Service value| SV| 0,1| (m3/min)/W
Standby power consumption| PSB| 0,34| W
Fan sound power level| LAW| 64| club)
Maximum air velocity| C| 5,3| meters/sec
Measurement standard for service value| EN50564: 2011
EN60704-1: 2010+A11:2012
EN60704-2-7: 1998
(EU)No 2016/2012+(EU)2016/2282
Contact details for obtaining more information| 2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: -i-48 22 331 99 59
e-mail: [email protected]
www.blaupunkt.com
Important notes
- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
- This device is for domestic use only. Do not use it for any other purposes.
- The device should only be connected to a socket with values corresponding to the values on the rating label.
- It is necessary to check if the total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
- Do not let the cord hang over the edge of the counter, or touch any hot surface.
- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
- Before maintenance work always disconnect the unit from the power supply.
- When unplugging the power cord from the electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.
- Damage to the power cord or plug can lead to an electrocution hazard.
- Never leave the product connected to the power source without supervision.
- Never put the power cable, the plug, or the whole device into the water or any other liquids.
- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
- Do not place the device near sources of heat, flame, an electric heating element, or a hot oven. Do not place it on any other device.
- This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience in using this equipment, must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.
- Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
- Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
- Never use the product close to combustibles.
- Never expose the product to atmospheric conditions such as direct sunlight or rain, etc… Never use the product in humid conditions (like a bathroom or camping house).
- The power cable should be periodically checked for damage.
- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.
- All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user. Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories that are not recommended by the manufacturer may result in damage to the device and may render the device unsafe for use.
- Do not switch the unit on if it is not assembled correctly, especially the rear grille together with the water curtain.
- Do not place the unit near curtains or other objects that can be accidentally entangled in the fan.
- Use the unit only in rooms with properly functioning ventilation.
- If there is water in the tank, do not tilt the unit or tip it over.
- Do not activate the cooling mode if the water tank is empty.
- Do not overfill the water tank past the marked MAX level.
- Avoid situations when the unit is in cooling mode and the water level in the tank is below the MIN mark.
- It is not recommended to leave the unit with a tank filled with water if the unit is not going to be used for a long time.
- Do not position the air outlet grilles manually, this may damage the motor or the oscillation system.
- Do not use any fragrances or water additives. Only clean water and ice may be used for the water tank.
Device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC) Device marked CE mark on the rating
label
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2012/19/EU. Please
inform yourself about the local separate collection system for electrical and
electronic products. The used appliance should be delivered to the dedicated
collecting points due to hazardous components, which may affect the
environment. Do not dispose of this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box), polystyrene
foam(buffer), and polyethylene (bags, protective foam sheet). Your system
consists of material that can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries, and old equipment.
Your products are designed a manufactured
with high-quality materials and components, which can be recycled and reused.
Technical data
Power: 120W
Power supply: 220-240V-50Hz
1. Control panel
1 a) Power button
1 b) Fan speed button ‘
1 c) Cooling function button
1d)Timer button
1 e) Horizontal oscillation button
1f)Vertical oscillation button
1g) Night mode function button
2. Small tank lid
3. Handles| 4. Unit body
5. Water level gauge
6. Air outlet grille
7. Wheels
8. Rear grille
9. Water curtain
10. Water tank
11. Water tank cap
12. Cooling pack
---|---
USE
-
Check that the unit is properly assembled: -the water curtain and rear grille are correctly installed; -the unit is set firmly on 4 wheels.
-
Fill the water tank with water Do not exceed the maximum level, marked MAX. Water can be poured directly into the water tank after removing the unit body, or using a vessel/bottle after opening the lid of the small water tank (pay attention to the water level indication in the tank).
-
To increase cooling efficiency, it is recommended to use cooling packs (chilled for several hours in the freezer) or ice cubes. The cooling packs can be placed in the water tank or in the small tank. The highest cooling efficiency is achieved by inserting the cooling pack into the small water tank.
WARNING: When placing ice cubes or cooling packs, make sure the water level does not exceed the maximum water tank level. -
Place the unit body on the water tank (with the control panel facing upwards). Make sure that the pump handle is extended. Lock the wheels.
-
Connect the unit to the power source. Press the power button , to turn the fan on. The unit has memory support for the last selected operation mode. It will be reset when the unit is disconnected from the power source. By default, the fan will start at maximum speed.
-
To change the fan rotation speed, press the fan speed button .
-
The vertical and horizontal oscillation functions can be switched on and off using the and buttons.
-
The cooling function can only be activated if the water level in the water tank is above the MIN indicator. Make sure that the pump handle is extended. When the cooling button is pressed, the pump will start to direct the water to the small water tank from where it will seep into the water curtain.
WARNING: If the water level in the tank falls below the minimum level, the cooling function will switch off automatically, the unit will produce a sound signal and the cooling button will begin to flash. -
The unit has a delayed shut-down function. Each time the Timer button is pressed, it will set a delayed shut-down in 1, 2, 4, or 8 hours. The appropriate indicator will signal the selected setting.
-
Automatic switch-off. The unit will switch off automatically after 24 hours. Press the power button to turn it back on.
-
Night mode: Press the SLEEP button to start the night mode. It will change color, the other indicators will go out. The unit will reduce the fan speed every 20 minutes until it reaches the minimum.
-
Remote control: the functions of the buttons on the remote control corresponding to the buttons on the control panel.
CLEANING AND MAINTENANCE
Make sure the unit is disconnected from the power source. Wipe the housing
with a soft damp cloth. Then wipe dry.
Clean the water tank and the curtain regularly. The curtain can be cleaned
with a soft brush. When removing the curtain from the rear grille, make sure
that the hooks and sharp edges of the grille do not damage the air curtain.
The curtain and water tank can be washed and rinsed under running water with a
small amount of dishwashing liquid. Then rinse thoroughly. The ventilation
grilles can be cleaned with a vacuum cleaner or compressed air.
Competence Center
2N-Everpol Sp. z o.o. ul.
Pulawska 403A 02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: [email protected]
www.blaupunkt.com
please contact our service. Tel. 00 48 22 331 99 54 E-mail:
[email protected]
All rights reserved. All brand names are registered trademarks of their
respective owners.
Specifications are subject to change without prior notice.