ARMOR ALL AWC8-1009-BLK 15W Wireless Charging Pad Instruction Manual
- June 1, 2024
- Armor All
Table of Contents
ARMOR ALL AWC8-1009-BLK 15W Wireless Charging Pad
Product Information
Specifications :
- Power Output : 5/7.5/10/15 Watts
- Compliance: FCC radiation exposure limits for an uncontrolled environment
Product Usage Instructions
Power Output Selection:
To select the desired power output, use the designated control on the equipment. Choose from 5, 7.5, 10, or 15 Watts based on your requirements.
Compliance with FCC Regulations:
Ensure that this equipment is used in accordance with FCC radiation exposure limits for uncontrolled environments to maintain compliance and safety.
FAQ
- Q: What should I do if I need to change the power output?
- A: To change the power output, simply adjust the control on the equipment to select between 5, 7.5, 10, or 15 Watts.
- Q: How do I ensure compliance with FCC regulations?
- A : To comply with FCC radiation exposure limits, always operate the equipment in an uncontrolled environment as specified in the regulations.
Introduction
Use the 15W charging wireless pad to charge your Qi-compatible device. The
wireless pad is equipped with a built-in phone stand. Use the phone stand to
prop up your phone while using GPS navigation to follow the on-screen
directions.
Features
- • Wireless charging smartphone mount for dash or center console
- • Fast charge your Qi-compatible device wirelessly
- • Slide the smartphone in the built-in stand for easy viewing and hands-free navigation
- • Easily power through your car USB port or car charger (not included)
- • Multipurpose use in auto, home and office
Specifications
- Input: 5V/3A, 9V/2A(QC)
- Output: 5/7.5/10/15 Watts
- Cable Length: 3.3ft
Includes
- Wireless Charging Pad
- Built-in USB Power Cable
- User Manual
Get Started
Caution : To prevent damage to the phone or the charger:
- Remove metal cases, or cases with any magnet/metal components, from the phone before charging.
- Do not place metal objects on the charger during charging.
- Qi wireless chargeable phones with metallic looking finishes will charge normally.
Note : Very thick phone cases can obstruct wireless charging.
For effective charging, it may be necessary to reposition the phone or remove the case.
Using your Wireless Charging Pad
- Locate a secure area where you intend to place the wireless charger and clean the area free of dust
- Plug the USB power cord into the 5V USB adapter Requires 5V/3A, 9V/2A QC power adapter for optimal charging
- Place your Qi-enabled smartphone in the center of the wireless charger to begin charging
- Consider turning off your phone vibrating notifications during charging, as vibrations may cause your phone to shift position on the charger and stop charging
- Disconnect the USB cable once the product is fully charged
ONE YEAR WARRANTY
Xtreme, official licensee of Armor All” warrants its products for ONE YEAR
against defects in manufacturing under regular consumer use with original
receipt of retail purchase.
We believe in our products and want to provide you with a replacement if
needed, but we have to know about the problem while the product is still under
warranty. If you discover a defect covered by this warranty, please contact us
about receiving a replacement. In order to use the product’s warranty the
customer must provide proof of the retailer’s receipt.
“Any customers outside of the U.S. will be responsible for shipping and
handling charges if a replacement is required that is not due to a
manufacturing defect. If there is not a manufacturing defect, shipping and
handling will be applied.
Xtreme’s warranty is limited to our products only. Our warranty does not cover
the replacement or repair cost of any third-party accessory, electronic device
or personal property.
For instructions about how to obtain warranty service for your product, please
contact Customer Service at
info@ArmorAllElectronics.com
©2023 Energizer Auto. Armor All is a trademark of Energizer Auto and is used under license by Jem Accessories, Inc.
Safety Instructions
Read all the instructions before using the product and store them for future reference. Use the product as intended.
- Most states allow drivers to mount phones inside their car as long as it doesn’t get in the way of their ability to drive safely. Please check local laws before attaching to
- Make sure to choose the flattest and secure area on the dashboard that does not obstruct your view of the road and surroundings while driving.
- Secure and adjust before driving. Do not adjust while driving.
- Disconnect the charging cable once your phone is fully charged.
- Keep close supervision of this product if being used around children.
- Do not expose to heat sources, the sun, or leave in a hot vehicle.
- Do not modity or try to use for a non-intended purpose
- Do not cover the product with paper or other materials. Use in a well-ventilated area when charging.
- Wireless chargers generate heat when charging, and the wireless charger may temporarily stop charging if it gets too hot.
- Do not use if damaged or modified.
- Do not drop, puncture or disassemble this product.
- Do not dissemble. There are no serviceable parts inside.
- Do not place magnetic strip cards or similar magnetically sensitive items between the phone and the charger.
- Wireless charging uses magnetic induction which could damage these items.
- Multiple Qi devices cannot be charged at the same time.
- Your phone will not charge wirelessly if it is connected to a computer’s USB port, a USB power adapter or other USB charging source.
- Do not use abrasive cleaning solvents to clean the unit.
- If you have a pacemaker or other such device, consult a physician before using this product.
Certifications
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
AWC8-1009-BLK
Please call or email us for customer support or for more information.
- Toll-Free : 877-405-2397
- info@ArmorAllElectronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>