AMBIEN TECH STCV-SA-A-96-EVO SleekTone CV Smart Controller Instruction Manual
- May 15, 2024
- AMBIEN TECH
Table of Contents
AMBIEN TECH STCV-SA-A-96-EVO Sleek Tone CV Smart Controller
Installation Instructions Sleek Tone CV Smart Controller
Quick Specs
Input / Output Voltage| 12 / 24VDC
Max Power| 12V (5A) / 24V (4A)
Ambient Temp| 30°C – + 40°C / -86°F – + 104°F
Environment| Dry and Damp Location
Before You Begin
To avoid fire, shock, or death, turn the power off at circuit breaker and test to ensure the power is off before wiring.
Select Dimming Mode
Long press the “S” button until the green light above it flashes. Count the # of flashes to verify which mode it is now set to.
| Mode | S Green LED |
|---|---|
| Tunable White | • (Default |
| Dim-to-Warm | •• |
| Dimming | ••• |
Sleek Tone Interface
Connect to the Smart Air App
- Scan the QR code to download the app. Follow the instructions to connect to the Smart Air App
- Press the “S” button to reset device manually.
Wiring Diagram
- If you are installing a smart wall switch – See page 2.
Tunable White
Dim-to-Warm
Dimming
Pairing With A Smart Dimmer
Wiring Option 1
Electrical Connection
If you are installing more than one Wall Switch unit, all others must be switched Off while pairing.
- Make sure both sliders are set to the top and the Wall Switch is switched Off.
- Switch the power ON at the circuit breaker, the green LED Indicator will light up.
- Turn ON the Wall Switch, the green LED Indicator will blink while pairing.
- After up to 15 seconds, your LED fixture will be paired with the Wall Switch.
- To verify pairing is successful, move the sliders and ensure that the LEDs respond accordingly.
- Scan the QR code to download the app. Follow the instructions to connect to the Smart Air App.
- If pairing is not successful press the Wall Switch’s pairing button.
Wiring Option 2
Stand-alone Dimmer
If you are installing more than one Wall Switch unit, all others must be switched Off while pairing.
- Make sure both sliders are set to the top and the Wall Switch is switched Off.
- Switch the power ON at the circuit breaker, the green LED Indicator will light up.
- Press the Pair Device Button “D” on the Sleek Tone CV
- Turn ON the Wall Switch and press the reset button.
- The green LED Indicator will blink while pairing.
- After up to 15 seconds, your LED fixture will be paired with the Wall Switch.
- To verify pairing is successful, move the sliders and ensure that the LEDs respond accordingly.
- Scan the QR code to download the app. Follow the instructions to connect to the Smart Air App.
- If pairing is not successful please repeat the pairing process.
Customer Assistance
For technical questions regarding the installation or operation of this product, please contact our customer support team :
347-334-6368 exit 3
For more info
Documents / Resources
|
AMBIEN TECH STCV-SA-A-96-EVO SleekTone CV Smart
Controller
[pdf] Instruction Manual
STCV-SA-A-96-EVO SleekTone CV Smart Controller, STCV-SA-A-96-EVO, SleekTone CV
Smart Controller, CV Smart Controller, Smart Controller, Controller
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>