AVer DL30 Distance Learning Tracking Camera Instruction Manual

www.aver.com
Distance Learning Tracking Camera
DL30/DL10
Control Codes

Revision History

settings.
V1.2| March 2021| • Update CGI command and example code.
V1.3| December 2021| • Added DL10 into control code;
• Refreshed More Help and Contact Information for Headquarters and regional offices.

Product Introduction

Overview-DL30

Line input level: 1Vrms (max)
Mic input level: 50mVrms (max); Supplied voltage: 3.3V
**DL30 does not support HDMI port.
*Only support IEEE 802.3at PoE+ standard.
Overview-DL10**

Line input level: 1Vrms (max)
Mic input level: 50mVrms (max); Supplied voltage: 3.3V

Visca Command Table-DL Series

Command Set| Command| Command Packet| Comments| DL30| DL10
---|---|---|---|---|---
CAM_Power| On| 8x 01 04 00 02 FF| Power ON/OFF| O| O
Off| 8x 01 04 00 03 FF| O| O
CAM_Zoom| Stop| 8x 01 04 07 00 FF| | O| O
Tele(Variable)| 8x 01 04 07 2p FF| p=0 (Low) to 7 (High)| O| O
Wide(Variable)| 8x 01 04 07 3p FF| O| O
CAM_Focus| Stop| 8x 01 04 08 00 FF| | O| O
Auto Focus| 8x 01 04 38 02 FF| | O| O
Manual Focus| 8x 01 04 38 03 FF| | O| O
One Push| 8x 01 04 18 01 FF| | O| O
Direct| 8x 01 04 47 0p 0q 0r 0s FF| pqrs: Zoom Position| O| O
CAM_WB| Auto| 8x 01 04 35 00 FF| Normal Auto| O| O
ATW| 8x 01 04 35 04 FF| | O| O
Indoor| 8x 01 04 35 01 FF| | O| O
Outdoor| 8x 01 04 35 02 FF| | O| O
One Push WB| 8x 01 04 35 03 FF| One Push WB mode| O| O
Manual| 8x 01 04 35 05 FF| Manual Control mode| O| O
One Push| 8x 01 04 10 05 FF| One Push WB Trigger| O| O
CAM_RGain| Up| 8x 01 04 03 02 FF| Manual Control of R Gain| O| O
Down| 8x 01 04 03 03 FF| | O| O
CAM_Bgain| Up| 8x 01 04 04 02 FF| Manual Control of B Gain| O| O
Down| 8x 01 04 04 03 FF| | O| O
CAM_AE| Full Auto| 8x 01 04 39 00 FF| Automatic Exposure mode| O| O
Manual| 8x 01 04 39 03 FF| Manual Control mode| O| O
Shutter Priority| 8x 01 04 39 0A FF| Shutter Priority Automatic Exposure mode| O| O
Iris Priority| 8x 01 04 39 0B FF| Iris Priority Automatic Exposure mode| O| X
Bright| 8x 01 04 39 0D FF| Bright Mode (Manual control)| O| O
CAM_Shutter| Up| 8x 01 04 0A 02 FF| Shutter Setting| O| O
Down| 8x 01 04 0A 03 FF| | O| O
CAM_Iris| Up| 8x 01 04 0B 02 FF| Iris Setting| O| X
Down| 8x 01 04 0B 03 FF| | O| X
CAM_Gain| Up| 8x 01 04 0C 02 FF| Gain Setting| O| O
Down| 8x 01 04 0C 03 FF| | O| O
CAM_Bright| Up| 8x 01 04 0D 02 FF| Bright Setting| O| O
Down| 8x 01 04 0D 03 FF| | O| O
| Up| 8x 01 04 0E 02 FF| Exposure Compensation Amount Setting| O| O
Down| 8x 01 04 0E 03 FF| | O| O
CAM_Backlight| On| 8x 01 04 33 02 FF| Back Light Compensation ON/OFF| X| X
Off| 8x 01 04 33 03 FF|
CAM_Preset| Reset| 8x 01 04 3F 00 pp FF| pp: Preset Number 0x00~0xFF| O| O
Set| 8x 01 04 3F 01 pp FF| O| O
Recall| 8x 01 04 3F 02 pp FF| O| O
CAM_Menu| On/Off| 8x 01 06 06 10 FF| Display ON/OFF| X| X
Pan-tilt Drive| Up| 8x 01 06 01 VV WW 03 01| VV: Pan speed setting 0x01 (low speed) to 0x18 (high speed)
WW: Tilt speed setting 0x01 (low speed) to 0x18 (high speed)| O| O
Down| 8x 01 06 01 VV WW 03 02| O| O
Left| 8x 01 06 01 VV WW 01 03| O| O
Right| 8x 01 06 01 VV WW 02 03| O| O
UpLeft| 8x 01 06 01 VV WW 01 01| O| O
UpRight| 8x 01 06 01 VV WW 02 01| O| O
DownLeft| 8x 01 06 01 VV WW 01 02| O| O
DownRight| 8x 01 06 01 VV WW 02 02| O| O
Stop| 8x 01 06 01 VV WW 03 03| O| O
Home| 8x 01 06 04 FF| | O| O
Reset| 8x 01 06 05 FF| | X| X
CAM_Wdr| On| 8x 01 04 3D 02 FF| Wdr ON/OFF| O| O
Off| 8x 01 04 3D 03 FF| | O| O
CAM_MenuEnter| | 8x 01 7E 01 02 00 01 FF| Enter Submenu| X| X
Tally Lamp ON| | 8x 01 7E 01 0A 00 02 FF| | X| X
Tally Lamp OFF| | 8x 01 7E 01 0A 00 03 FF| | X| X
Freeze| Freeze On| 81 01 04 62 02 FF| Freeze On Immediately| X| X
Freeze Off| 81 01 04 62 03 FF| Freeze Off Immediately| X| X
Preset Freeze On| 81 01 04 62 22 FF| Freeze On When Running Preset| O| O
Preset Freeze Off| 81 01 04 62 23 FF| Freeze Off When Running Preset| O| O
Auto Tracking| On| 8x 01 04 7D 02 FF| Auto tracking ON/OFF| O| O
Off| 8x 01 04 7D 03 FF| | O| O
CAM_Memory Special| Set| 8x 01 04 3F 01 pp FF| pp: 0x00 To 0xFF normal preset
pp: 0x5F => Turn on OSD menu
pp: 0xA0 => Full Body
pp: 0xA1 => Upper Body
pp: 0xA2 => Tracking Point
pp: 0xA3 => Switch
pp: 0xA4 => Presenter mode (support with FW v25 or newer)
pp: 0xA5 => Zone mode (support with FW v25 or newer)| Turn on OSD menu X
Full Body O
Upper Body O
Tracking Point X
Switch O
Presenter mode O
Zone mode O| Turn on OSD menu X
Full Body O
Upper Body O
Tracking Point X
Switch O
Presenter mode O
Zone mode O
Inquiry Command| Command Packet| Reply Packet| Comments| DL30| DL10
---|---|---|---|---|---
CAM_PowerInq| 8x 09 04 00 FF| y0 50 02 FF| On| O| O
y0 50 03 FF| Off| O| O
CAM_WBModeInq| 8x 09 04 35 FF| y0 50 00 FF| Auto| O| O
y0 50 01 FF| In Door| O| O
y0 50 02 FF| Out Door| O| O
y0 50 03 FF| One Push WB| O| O
y0 50 04 FF| ATW| O| O
y0 50 05 FF| Manual| O| O
CAM_RGainInq| 8x 09 04 43 FF| y0 50 00 00 0p 0q FF| pq: R Gain| O| O
CAM_BGainInq| 8x 09 04 44 FF| y0 50 00 00 0p 0q FF| pq: B Gain| O| O
CAM_AEModeInq| 8x 09 04 39 FF| y0 50 00 FF| Full Auto| O| O
y0 50 03 FF| Manual| O| O
y0 50 0A FF| Shutter Priority| O| O
y0 50 0B FF| Iris Priority| O| O
y0 50 0D FF| Bright| O| O
CAM_ShutterPosInq| 8x 09 04 4A FF| y0 50 00 00 0p 0q FF| pq: Shutter Position| O| O
CAM_IrisPosInq| 8x 09 04 4B FF| y0 50 00 00 0p 0q FF| pq: Iris Position| O| X
CAM_GainPosInq| 8x 09 04 4C FF| y0 50 00 00 0p 0q FF| pq: Gain Position| O| O
CAM_BrightPosInq| 8x 09 04 4D FF| y0 50 00 00 0p 0q FF| pq: Bright Position| O| O
CAM_ExpCompPosI nq| 8x 09 04 4E FF| y0 50 00 00 0p 0q FF| pq: ExpComp Position| O| O
CAM_FocusModeIn q| 8x 09 04 38 FF| y0 50 02 FF| Auto Focus| O| O
y0 50 03 FF| Manual Focus| O| O
CAM_FocusPosInq| 8x 09 04 48 FF| y0 50 0p 0q 0r 0s FF| pqrs: Focus Position| O| O
CAM_ZoomPosInq| 8x 09 04 47 FF| y0 50 0p 0q 0r 0s FF| pqrs: Zoom Position| O| O

Visca over IP Settings

The x value should be 1 for Visca-over-IP string,
Example string: 01 00 00 09 00 00 00 01 81 01 06 01 07 07 01 03 FF

CGI Command Table-DL Series

O
Tracking on:| /cgi-bin?Set=| trk_tracking_on,3,1| | | | O
Tracking off:| /cgi-bin?Set=| trk_tracking_on,3,0| | | | O
Tracking Presenter Mode:| /cgi-bin?Set=| trk_mode,3,1&(random)| | | | O
Tracking Zone Mode:| /cgi-bin?Set=| trk_mode,3,2&(random)| | | | O
Reboot| /cgi-bin?OnePush=!| | | | | O
Factory Reset| /cgi-bin?OnePush=d| | | | | O
Mode Presenter| /cgi-bin?Set=| trk_mode,3,1&(random)| | | | O
Mode Zone| /cgi-bin?Set=| trk_mode,3,2&(random)| | | | O
Mode Get| /cgi-bin?Get=| trk_mode,3 &(random)| | | Reply: trk_mode,3=1 : Presenter(Wide Area)
trk_mode,3=2 : Zone(Segment)| O
Update Detect Info| /cgi-bin?Set=| trk_update_detect,3,1| | | Use this CGI to update data before getting the detect zone info| O
Click Track
Get detect zone number| /cgi-bin?Get=| trk_detect_num,3| | | Reply: ** trk_detect_num,3=X
X: Number of detected people, up to 50.
(Use “Update Detect Info” CGI first)| O
Click Track
Get detect zone info| /cgi-bin?GetTrackingDe tectZone=X
(X: Number of human ** shape box that user want to get)| | | | Reply:
focus: XX
zone[00]:840,703,207,379
zone[01]:1176,724,240,350
XX – current tracking box number
zone[NN]:x,y,w,h – box coordinate(based on 1080p)| O
Click Track
Set target zone| /cgi-bin?SetString=| TrackingFocusZone,[x,y,w,h]| | | [x,y,w,h]: Position of tracking target (based on 1080p)| O
Click Track
Set target zone| /cgi-bin?Set=| trk_assign_zone,3,X| | | X: Human shape box number of tracking target| O
Tracking On/Off Get| /cgi-bin?Get=| trk_tracking_on,3| | | Reply:
trk_tracking_on,3=1 : On
trk_tracking_on,3=0 : Off| O
Sleep Timer| /cgi-bin?Set=| sys_sleep_time,3,N| value| 0, 10, 300, 600, 1200| N : value (0 : Off)| O

Example Codes-DL Series

Example codes
Assuming the camera having an IP address of 10.10.10.5
Up start : http://10.10.10.5/cgi- bin?SetPtzf=1,0,2&(1234)
Zoom in start : http://10.10.10.5/cgi- bin?SetPtzf=2,0,1&(1235)
Tracking on : http://10.10.10.5/cgi-bin?Set=trk_tracking_on,3,1
Tracking off : http://10.10.10.5/cgi-bin?Set=trk_tracking_on,3,0
The (random) code is user defined and can be any unique code in sequence. This ID cannot be the same, otherwise the camera will ignore this command.
Example codes:
There are the examples for saturation, exposure, and contrast.
Saturation example: http://10.10.10.5/cgi- bin?Set=img_saturation,3,10&(1238) <= the red value 10 is the value of saturation.
Exposure example #1: http://10.10.10.5/cgi- bin?Set=img_expo_expo,3,9&(1239) <= the red value 9 is the value of exposure, the exposure value (-4 ~ 4) in system is 4.
Exposure example #2: http://10.10.10.5/cgi- bin?Set=img_expo_expo,3,1&(1240) <= the red value 1 is the value of exposure, the exposure value (-4 ~ 4) in system is -4.
Contrast example: http://10.10.10.5/cgi- bin?Set=img_contrast,3,4&(1241) <= the red value 4 is the value of contrast.
Sleep Timer example #1: http://10.10.10.5/cgi-bin?Set=sys_sleep_time,3,0 <= The red value 0 is the value of sleep timer. 0 means disable the sleep timer.
Sleep Timer example #2: http://10.10.10.5/cgi- bin?Set=sys_sleep_time,3,300 <= The red value 300 is the value of sleep timer. 300 means set the sleep timer to 5 min (300sec).

More Help
For FAQs, technical support, software and user manual download, please visit:
Headquarters
Download Center: https://www.aver.com/download-center
Technical Support: https://www.aver.com/technical-support
USA Branch office
Download Center: https://www.averusa.com/education/support
Technical Support: https://averusa.force.com/support/s/contactsupport
Europe Branch office
Download Center: https://www.avereurope.com/download-center
Technical Support: https://www.avereurope.com/technical-support

Contact Information
Headquarters
AVer Information Inc.
https://www.aver.com
8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673, Taiwan
Tel: +886 (2) 2269 8535
Europe Branch office
AVer Information Europe B.V.
https://www.avereurope.com
Westblaak 134, 3012 KM, Rotterdam, The Netherlands
Tel: +31 (0) 10 7600 550
Technical support: eu.rma@aver.com
USA Branch office
AVer Information Inc., Americas
https://www.averusa.com
668 Mission Ct., Fremont, CA 94539, USA
Tel: +1 (408) 263 3828
Toll-free: +1 (877) 528 7824
Technical support: support.usa@aver.com

Documents / Resources

| AVer DL30 Distance Learning Tracking Camera [pdf] Instruction Manual
DL30 Distance Learning Tracking Camera, DL30, Distance Learning Tracking Camera, Learning Tracking Camera, Tracking Camera, Camera
---|---

References

• Support
• アバー・インフォメーション | 書画カメラ、ビデオ会議システム、タブレットPC充電保管カートの専門メーカーです| AVer Japan
• AVer USA
• AVer Global
• AVer Global | Download Center | AVer Global
• Technical Support ! AVer Global
• AVer Europe
• AVer Europe
• AVer Global | Download Center | AVer Global
• Technical Support ! AVer Europe
• AVer USA
• AVer USA
• Support: Videos, FAQ, Troubleshooting, and Download | AVer USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>