Singke Touch Series TWS Wireless Bluetooth Earbuds User Manual
- June 10, 2024
- Singke
Table of Contents
Singke Touch Series TWS Wireless Bluetooth Earbuds
FUNCTIONAL DIAGRAM
poll out after rotation
Inserting the Earbuds in the Ears
Choosing and replaceable ear adapters.
HOW TO USE
TO CHARGE CHARGINGCASE
- Connect Type-C cable to charge for the charging case
- Plug the USB connector of the cable into a USB Power source
- The indicator light will display while the charging case is charging
- All 4 lights keep on for 30 seconds and then off when the charging case is fully charged
WIRELESS CHARGING Position on charging pad
(charging pad not included) Put the charging case (wireless
charging area in blue circle) on the center of charging pad
TO CHARGE EARPHONES
- Put the earphone in the charging case correctly, and it will charge tor Earphones automatically
- The first left light flashes slowly when left earphone is charging
- The first right light flashes slowly when right earphone is charging
POWER ON AND PAIRING
-
Open the cover of charging case, both earphones will AUTO-ON and AUTO-PAIRING, both earphones will response with a voice prompt: “Dong” when connected with mobile phone successfully.
10S/Android:
Enable the bluetooth pairing r mode on your phone device. Tap on” Airplus- 029A “to connect. And both earphones will response with a voice prompt: “Dong” when connected with mobile phone successfully.
-
Earphones will response with a voice prompt: “Dong” when bluetooth signal is cut off, and shutdown 3 mins later automatically.
SEAMLESS SWITCHING BETWEEN EITHER EARBUDS
You have the freedom to wear one or both earbuds, and you are allowed to
seamless switching between either earbuds at your disposal.
- Take out either earphone form charging case, it will AUTO connect within 20ms.
POWER OFF
- Put the earphones in the charging case correctly, and close the cover, earphones will AUTO-OFF.
- Earphone will shutdown automatically in 3mins after disconnected with devices.
- Touch either earphone for 12s to shutdown manually.
- The battery status of earphones is visible on connected devices when it’ s running out of power, the earphones will remind you with a voice prompt: “DU,DU”,pls recharging in time.
PHONE & MUSIC
-
To Answer a call
Touch either earphone one short -
To End a call
Touch either earphone one short -
To Reject a call
Touch either earphone for 1 second -
To Play and pause music
Touch either earphone one short -
To Play Prev/Next Song
Double touch left earphone for previous song
Double touch right earphone for next song
VOICE ASSISTANT
Press left earphone about 3 seconds after hearing a prompt tone “di” and
release to activate Siri or voice assistant
ANC MODE
Touch and hold the right earphone for 2 seconds and release after hearing
english prompt sound, switch the mode of “Transparent mode – ANC ON ANC OFF”
19 RESTORE FACTORY DEFAULTS
Put the earphones into the charging case, and hold and press either earphone
for 5 seconds to restore factory resetting (Main earphone flashes red twice).
PROMPT TONE
CHARGING CASE SPECIFICATION
EARPHONE SPECIFICATIONS
SAFETY PRECAUTIONS
Please read follow and keep these instructions:
- Keep the device out of extreme heat and humid
- Power time may different depending on personal habits
- Heed all warnings on the product 21ld in the operation instructions
- Do not listen at high volume level for long period to protect hearing
- Stop using this product immediately if it causes discomfort or pain
INSIDE THE BOX
- Bluetooth Headset X 2PCS
- Charging Case XlPCS
- USB lightning charging cable XlPCS
- User Manual XlPCS
- Silicon Ear caps X6PCS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>