AVer SA-A5 Streaming Audio System User Manual

AVer SA-A5 Streaming Audio System

Specifications:

• Product Name: SA-A5 Streaming Audio System
• Model: SAB5V2
• Power Adapter: UL Listed Certificate, output compliant with LPS or PS2, rated 19Vdc, 3.42A min., Tma 35 degree C min.

Product Usage Instructions

Power Connection:
The power cord should be connected to a socket-outlet with a grounded connection to ensure safe operation.

Wireless Devices:

• SAT5 Pendant Microphones: Follow specific operating instructions to comply with FCC radiation exposure limits for an uncontrolled environment.
• SAR5 Microphone Receiver: Install and operate with a minimum distance of 20cm between the receiver and your body to comply with FCC radiation exposure limits.

IC Notice:
This device contains licence-exempt transmitter(s)/receiver(s) complying with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to specific conditions to avoid interference.

PSTI Statement of Compliance:
For more information on compliance, visit AVer Product Security Advisory.

Disclaimer:
No warranty or representation is made with respect to the contents of this documentation. Information presented is subject to change without notice.

TradeMarks:
AVer is a trademark owned by AVer Information Inc. Other trademarks used belong to their respective companies.

FAQ:

More Help
For FAQs, technical support, software, and user manual download, please visit:

• Non-USA Download
  Center

• USA Download
  Center

• Technical
  Support (Non-USA)

• Technical
  Support (USA)

Contact Information:
Headquarters
AVer Information Inc.
8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673,
Taiwan
Tel: +886 (2) 2269 8535

USA Branch Office
AVer Information Inc., Americas
44061 Nobel Drive, Fremont, CA 94538, USA
Tel: +1 (408) 263 3828
Toll-free: +1 (877) 528 7824
The power cord shall be connected to a socket-outlet with grounded connection. This product is intended to be supplied by a UL Listed Certificate power adapter and power cord, output comply with LPS or PS2, rated 19Vdc, 3.42A min., and Tma 35 degree C min. Please contact manufacturer, UL File owner or AVer for further information and assistance.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.
For Wireless Device:
For SAT5 Pendant Microphones:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying the RF exposure compliance.

For SAR5 Microphone Receiver:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the receiver & your body.

IC Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

For SAT5 Pendant Microphones:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

For SAR5 Microphone Receiver:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Europe – EU Declaration of Conformity
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU).

PSTI Statement of Compliance
Please refer to the following website: https://www.aver.com/product-security- advisory

DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. In no event will AVer Information Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.

TRADEMARKS
“AVer” is a trademark owned by AVer Information Inc. Other trademarks used herein for description purpose only belong to each of their companies.

COPYRIGHT
© 2024 AVer Information Inc. All rights reserved. | March 1, 2024
All rights of this object belong to AVer Information Inc. Reproduced or transmitted in any form or by any means without the prior written permission of AVer Information Inc. is prohibited. All information or specifications are subject to change without prior notice.

More Help
For FAQs, technical support, software and user manual download, please visit:

Non-USA
Download Center: https://www.aver.com/download-center
Technical Support: https://www.aver.com/technical-support

USA
Download Center: https://www.averusa.com/pro-av/support/
Technical Support: https://averusa.force.com/support/s/contactsupport

Contact Information
Headquarters
AVer Information Inc.
8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673, Taiwan
Tel: +886 (2) 2269 8535

Europe Branch Office
AVer Information Europe B.V.
Westblaak 134, 3012 KM, Rotterdam, The Netherlands
Tel: +31 (0) 10 7600 550

USA Branch Office
AVer Information Inc., Americas
44061 Nobel Drive, Fremont, CA 94538, USA
Tel: +1 (408) 263 3828
Toll-free: +1 (877) 528 7824

Overview

Package Contents
SAB5V2 Streaming Audio Box

Pendant Microphones

Pendant Microphones Optional Accessories

Speakers

Dimensions

SAB5V2 Audio Streaming Box

Speakers

Controls and Connections

SAB5V2 Streaming Audio Box

Top Cover

1. Sound Adjustment Buttons
   Front Panel

2. Power Button
   Short press: Power on.
   Long press for 5 seconds: Enter Standby Mode.

3. Status LED
    Solid blue: Microphone(s) is paired
   Off: Microphone(s) isn’t paired

4. Microphone Receiver (Dongle) Slot and Plug

5. PC Mute Button
   Solid red: PC is muted
   Off: PC isn’t muted

6. PC (USB Type-C) Port

7. Volume Controls:
   Assistive Listening Device (ALD) / Mic In / Wireless Mic / Speakers

8. Assistive Listening Device (ALD) Port

9. Mic In Port
   Back Panel

10. Volume Controls:
    USB Audio Class (UAC) / Line In

11. Ethernet Port

12. USB Type-A Port

13. Line In Port

14. Page Mute Port

15. Kensington Lock

16. Line Out Port

17. Speaker Push-in Terminal Connector Block

18. DC Power Jack

Pendant Microphones

1. Power/Mute Switch
   Press and hold for 3 seconds to turn the microphone on or off.

2. Mic In Port

3. USB Type-C Port

4. SOS Button (on Teacher Microphone)

5. Volume Up/Down

6. Battery LED
   Solid green: Normal
   Flashing red: Low battery

7. Status LED
   Solid blue: Paired
   Flashing blue: Not transmitting to a receiver or out of range
   Solid red: Mute
   Flashing red: Low battery

8. Battery Door

9. Lanyard Hook

10. Microphone Clip

Charging Case

Speakers

1. Wall Mount Bracket Knob
2. Speaker Spring Binding Post Terminal Connector

Power Connection
Connect the included power adapter and power cord to a power outlet with grounding connection.

Wall Mount Installation

The speakers should be mounted 2.13m (7 feet) from a wall outlet.

1. Level and tape the template to the wall. Drill pilot holes through the template and into the wall.
2. Remove the template and insert anchors.
   • Cement wall: M4x20mm self-tapping screws (2) + plastic conical anchor
   • Wooden wall: M4x20mm self-tapping screws (2)
3. Insert screws through the bracket and tighten to the wall.
4. Connect your speaker cables to the spring binding post terminal connectors.
5. Place the speaker inside the bracket and tighten the top and bottom bracket knobs to secure.
6. Loosen the bracket knobs to adjust the speaker angle as needed.

Getting Started

Set up Your SAB5V2 Streaming Audio Box
Insert the Microphone Receiver (Dongle)

1. Remove the plug and insert the microphone receiver (dongle) included in the SAB5V2 Streaming Audio System.
2. Short press the Power button to turn on the SAB5V2 Streaming Audio Box.

Note: Hot-plugging may damage your device. Please plug in the receiver before powering on and unplug it after powering off.

Set up Your Microphone

Pair Your Pendant Microphone

1. Make sure you have inserted the microphone receiver (dongle) and turned on the SAB5V2 Streaming Audio Box.
2. Press and hold the Power/Mute button on the microphone for 3 seconds until you see a solid green light, then release the button to continue the pairing process.
3. Pairing is successful when the status LEDs on both the microphone(s) and the SAB5V2 Streaming Audio Box turn solid blue.
   Solid blue: Paired
   Flashing blue: Not transmitting to a receiver or out of range

Use Your Microphone

Please follow the instructions below for optimal audio quality.

1. Tuck the lanyard through the hook and pull hard to secure the lanyard. Then wear it around your neck.
2. Adjust the lanyard to position the microphone approximately 15cm (5.9”) from mouth.
3. Press and hold the Power/Mute button for 3 seconds to power on > press again to mute > press and hold for 3 seconds to power off.
4. Adjust the volume with the Volume Up/Down buttons on the side of the microphone.
5. The microphone will automatically turn off:
   • When it is out of range and after 3 minutes of trying to connect.
   • After being muted for 30 minutes.

Solid blue: Paired
Flashing blue: Not transmitting to a receiver or out of range
Solid red: Mute
Flashing red: Low battery

For Emergencies

The emergency feature is only available in the US.

1. Connect the SAB5V2 Streaming Audio Box to your local network with an Ethernet cable and the Device Management software.
   ( Download here: https://www.aver.com/Downloads/search?q=SAA5)

2. Press and hold the SOS button on the Teacher Microphone for 3 seconds to send your location to the SA-A5 Streaming Audio System.

3. Both status LED and battery LED will flash red.

4. Your microphone will work normally after sending an SOS alert.

Status LED and battery LED flash red.

Charge Your Microphone

• It will take less than 3 hours to fully charge your microphones.
• Your microphone can get up to 8-10 hours of talk time on a single charge.
• 10 minutes of charge will provide 1 hour of talk time.
• Your microphones function normally while charging.

To charge, plug your charging case or microphone into a power source using the included USB Type-C cable.

The status LED lights on the microphones can be seen through the lid.
Solid green: Fully charged
Solid red: Charging

Replace Your Microphone Battery
[Note] The battery should be replaced by its manufacturer, service technician or a similarly qualified person.

1. Turn off the microphone. Loosen the screw and open the battery door.
2. Remove the battery by gently pulling up from the notch on the bottom.
3. Insert the replacement battery, close the battery door, and tighten the screw.

Set up Your Speakers

Connect Your Speaker Cables

1. Push down the spring binding post terminal connector on the back of your speakers to reveal the hole.
2. Insert the stripped end of the speaker wire into the hole in the center of the terminal connector. Make sure that the wire is connected to the correct terminal. The red wire should be connected to the red terminal, and the black or white wire (based on your speaker) should be connected to the black terminal.
3. Release the terminal connector. Make sure the wire is held securely and there are no loose strands.
4. Repeat the process for the other speaker wire.

Audio Features

Page Mute
When the page mute input terminal senses a strong enough signal, it will automatically mute all other audio inputs sources. This is to allow that everyone can hear the broadcasts from the Public Address System.

Audio Output to Assistive Listening Devices (ALD)
Assistive Listening Devices (ALD) can help students hear a teacher speaking across the room or hear a conversation in a noisy room.

1. Turn the ALD volume control all the way down on the SAB5V2 Streaming Audio Box.
2. Plug your transmitter into the ALD port on the front panel of the SAB5V2 Streaming Audio Box using the included 3.5mm to 3.5mm stereo cable.
3. Speak into the microphone and slowly adjust the volume control for a suitable audio level.

In the Classroom

1. Short press to turn on the SAB5V2 Streaming Audio Box. Press and hold the Power/Switch button on the microphone for 3 seconds to pair your pendant microphone.
2. Or use a wired microphone by:
   • Plugging it into the Mic In port on the pendant microphone that has been paired with the SAB5V2 Streaming Audio Box.
   • Plugging it into the Mic In port on the front panel of the SAB5V2 Streaming Audio Box.

Hybrid Learning

1. Short press to turn on the SAB5V2 Streaming Audio Box. Press and hold the Power/Switch button on the microphone for 3 seconds to pair your pendant microphone.

2. Connect devices. A slight popping sound during connection is considered a normal phenomenon. USB microphone
   When using your pendant or wired microphone, make sure your USB camera’s built-in microphone (if any) is turned off to reduce feedback.

3. Open your video conferencing software, such as Google Meet, Skype, Microsoft Teams or Zoom, and select “SAB5 Series” as the microphone and speaker source.

4. Sound Adjustment Button behaviors:

5. How to use the PC Mute button:

   • Press to mute PC speakers and sounds from online students to reduce distraction in class. They will still be able to hear you.

Web Application Settings

Access to the web application

1. Connect your SAB5V2 Streaming Audio box to the power adapter and the Ethernet cable.
2. To find your SAB5V2 Streaming Audio Box IP address, download the AVer IPCam Utility from https://www.aver.com/Downloads/searchq=AVer%20IPCam%20Utility%20for%20Camera%20IP%20 Searching and launch the application.
3. Click Search to view all available devices on the screen.
4. Select your SAB5V2 Streaming Audio Box from the device list to view more information in the Settings field.
5. Double click on the IPv4 Address field to open the web application in your internet browser.

Login

1. Enter the default Username and Password: admin / admin to log in.
2. For first time login, the system will ask you to change your Username and Password.
3. Read anonymous usage data policy. Select the checkbox to agree, and then click Done.
4. Log in with your new Username and Password. You will see the web application main page.

Device Status

files.
Reboot|

1. Click to restart your Streaming Audio Box, and click OK on the pop-up window to continue. It may take a few minutes to reboot.
2. Refresh your web browser and log in again when the reboot is finished.

Microphone Status

| View microphone connection status and battery status.

• Connection Status
  Connected / Not Connected

• Battery Status

Audio

Audio Out

function. For more information about this function, please refer to < Page Mute>.
Master Knob Control|

• Drag the slider to adjust the volume.
• Click Max Volume Setting to set up the maximum volume. When finished, click OK. You can only adjust the volume in a certain range.
• Click the Mute toggle switch to mute or unmute each setting.

**** Headphone out
Reset| Click to reset all the settings to factory default values.

Audio In

When the switch is on, you cannot change MIC in, UAC and Line in values.

Wireless MIC| ****

• Drag the slider to adjust the volume.
• Click Max Volume Setting to set up the maximum volume. When finished, click OK. You can only adjust the volume in a certain range.
• Click the Mute toggle switch to mute or unmute each setting.

MIC in
UAC
Line in
Reset| Click to reset all the settings to factory default values.

Network

Network Setting

• DHCP : The system will assign a related IP address to the device.
• Static IP : You may manually enter IP Address , Netmask , Gateway and DNS.

Hostname| Click to edit the Hostname. When finished, click Confirm.
IP Address|
**** Netmask|

1. Turn off the DHCP toggle switch to switch to Static IP.
2. You may manually enter IP Address , Netmask , Gateway and DNS in the text boxes.
3. When finished, click Confirm.

Gateway
DNS|

HTTPS Settings
Click the HTTPS toggle switch to turn on or off the function. When HTTPS function is on, it will establish a secure connection between your browser and your Streaming Audio Box.

1. Create a SSL certificate file for encryption and decryption.
2. In Upload Certificate setup field, click Choose File to select the certificate file on your computer.
3. When finished, click Upload.

System

Model Name , Serial Number , IP Address , MAC Address , and Firmware Version.
Upgrade Firmware|

1. Download firmware update file from Aver Download Center to your computer.
2. Click Choose File to select the firmware update file.
3. Click Upgrade to upgrade your device firmware.

Language| Select from the drop-down list to change the system language.
Help us improve| Select or unselect the checkbox to allow or don’t allow to send anonymous usage data to AVer.
Factory Default| Click Reset To Factory Default to set all settings to factory default values.
Username| Change the login username in the text box. When finished, click Change.
Password| Change the login password in the text box. When finished, click Change.

Specification

SAB5V2 Streaming Audio Box

Pendant Microphones

| Teacher| Student
---|---|---
Style| Pendant with clip and lanyard
Channels| 1
Transmission Type| Wireless
Wireless Frequency| 2.4 GHz
Frequency Response| 50 Hz – 20 kHz
Coverage| 20m (65 ft.)
Microphone Capsule| Omni-directional electret condenser
Battery| Rechargeable and removable Li-ion battery
Battery Power| 3.7V
Talk Time| 8-10 hours
Charging Time| <3 hours
Charging Method| USB Type-C
Dimensions (W x D x H)| Microphone: 33 x 20.2 x 73.3mm (excluding clip) Receiver: 55 x 30 x 10mm
Net Weight| 35g
Power/Mute Switch| Press and hold the Power/Mute button for 3 seconds to power on > press again to mute > press and hold for 3 seconds to power off.
Volume| Up/Down buttons
Safey Alert| SOS button| N/A
Status LED|
|
---|---
Battery LED|
Mic In Port| 3.5mm stereo
USB Type-C Port| 1
Power Rating| 5 VDC, 0.4A

Wireless Receiver Dongle

Charging Case

Speakers

Environmental Specifications

Specifications are subject to change without prior notice.

Troubleshooting

Microphone doesn’t pair.

• Make sure the SAB5V2 Streaming Audio Box is turned on. A solid green or orange light on the Power button will indicate that it is powered on.
• Make sure the SAB5V2 Streaming Audio Box is not placed in an enclosed space where the Wi-Fi signal may be obstructed.
• Press and hold the Power/Mute button on the microphone for 3 seconds to power off, and try pairing again.

No or low volume from the microphone.

• Make sure the microphone is not muted. A solid red light on top of the microphone indicates that it’s muted.
• Adjust the volume with the Volume Up/Down buttons on the side of the microphone.
• Position the microphone approximately 15cm (5.9”) from mouth for optimal audio quality.

I hear feedback (squealing).

• The volume may be too high. Adjust the Volume Up/Down buttons on the side of the microphone.
• The microphone may be too close to the speaker. Move the microphone away from the speaker.

No sound for the speaker

• Make sure the SAB5V2 Streaming Audio Box is turned on. A solid green or orange light on the Power button will indicate that it is powered on.
• Check if the SAB5V2 Streaming Audio Box is not muted. If yes, press the Mute Speaker button  on the top of the Audio Box to unmute.
• Make sure the SAB5V2 Streaming Audio Box volume input is unlocked. If you see a solid orange light on the Power button, press the lock/unlock button to unlock input settings. The Power button will display a solid green light, and try increase speaker volume to resolve the issue.

References

• Support
• AVer Global | Download Center | AVer Global
• AVer IPCam Utility for Camera IP | Download Center | AVer Global
• SAA5 | Download Center | AVer Global
• Technical Support ! AVer Global
• Downloads | AVer USA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>