CleanView® Pet/Plus/Rewind Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Container > Open the Tank Lid by pressing the filter button and pulling the Lid up
-
Remove the Pre-Motor Filter
- Filter can be rinsed with warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Slide out the Post Motor Filter Tray located below the Dirt Container
-
Tap the filter against a waste bin to remove any dust and debris
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>