Fengdian M8S Automobile Data Recorder User Manual

Automobile data recorder
User Manual

M8S Automobile Data Recorder

Please read before using and keep it for future use.
Val.1

Product INFO

1.1 Camera Details

inserting TF Card (Micro SD Card)
3| | 2.5mm Round hole interface for connect with Rear Cam
4| | Differ function, please see the ‘3. Basic Operation’.
5| | Differ function, please see the ‘3. Basic Operation’.
6| | Differ function, please see the ‘3. Basic Operation’.
7| | Differ function, please see the ‘3. Basic Operation’.
8| | Differ function, please see the ‘3. Basic Operation’.
9| | 1.Blue light is always bright mean powered on (but not recording)
2.Blue light blinking means recording is in progress
10| | Screen protective film (please tear off when using)
11| | Cam protective film (please tear off when using)

1.2 Screen Details
1.2.1 Recording Interface

1.2.2 Menu Interface
­

Menu Function Introduction:

1. WIFI: ON/ OFF
   Explanation: The WIF] function is equivalent to Bluetooth function, and the video saved in your memory card is transmitted to your mobile pop for viewing through Bluetooth

2. IR LED: ON f OFF f Auto (recommended to set to Auto) Explanation: IR LED means infrared night vision light The left and right lenses of recorder have four infrared night vision lights each

3. Loop Record : 1min / 2min / 3min (Suggest ‘1 or 2min’)
   Explanation: The video recorded is saved in segments.
   If you set it to 1min, the video clips saved by recorder are all in 1minute units.

4. G-Sensor: OFF / High / Middle / Low (Suggest ‘Middle or Low’)
   Explanation: If the recorder reaches a certain level of vibration, it will trigger the emergency locking function to lock the currently recorded video clip.

5. Language: English Other Multilingual
   Explanation: Select your corresponding language, the recorder
   will switch to the corresponding language text display.

6. Screen Saver: OFF/ 1min / 3min / Off-screen recording
   Explanation: Screen savers are designed to protect the monitor and save power.
   [Off: When recorder is turned on, the screen is always on.
   1/3min: After recorder is turned on, after waiting for 1/3min, it will automatically turn off the screen.
   Off-screen recording:
   The screen will not turn on by default when the machine is started/there is no boot sound.
   Press any button to wake up the screen of recorder.]

7. Clock: Year/ Month/ Day/ Hour/ Minute
   Explanation: Clock Settings will be shown above recording page.
   You can set it according to your country’s local time.

8. Format Card : YES / NO (Including protected files)
   Explanation: Format Card mean erasing all files in SD card.
   (After formatting is successful, the files cannot be recovered, please back up important files before operation.)

9. Reset: YES/ NO (Restore Default settings?)
   Explanation: The Reset is to restore the recorder to the initial default state, and all the parameters and options that have been set on the recorder will be restored.
   (Select YES: All your previous self-settings will be changed. )

1.2.3 Playback Interface

1.  Video File Selection InterfaceExample for REC Time: REC20220711-184423-9 mean Recording in 2022 Year/07 Month/11 Day  forty-four past 18 o’clock and 23 second 9th Video
   PS: Videos number are counted from the 0th.

2. Image File Selection Interface

3. Menu Page For Playback Mode
   In video file selection interface, short press Key to enter.

1. Volume: The volume of the device when playing the video

2. Video Type:
   Normal Video: Non-locked, normally recorded file
   Event Video: Lock video files

3. Camera 10 (Video File Selection):
   A. Front camera
   B: Left camera
   C: Right camera
   D: Rear camera

4. Delete
   Delete One: Delete the currently selected video file
   Delete All:
   a: Video File
   (Deletes all video files of the selected Camaro ID)
   b: image File
   (Deletes all image files of the selected Camaro ID)

5.  Protection:
   Protect Selected I Unprotect Selected
   (Mean Protect or Unprotect the currently selected file of the selected Carencro 10 )
   Protect All / Unprotect All
   (Mean: Protect or Unprotect all Video File or all Image File of the selected Camera ID)

Installation

2.1 About Install Memory Card

1.  Please insert the new Micro SD card when dash cam is turned off.
2. After insert the new Micro SD card in the card slot, please turned on the dash cam.
3. After the dash cam is turned on, please press Key to enter the Menu Interface.
4. In the Menu Interface, press Key to switch to the option of ‘Format Card’, and press Key to enter.
5.  Then select the ‘YES’ option and press Key to confirm formatting.
6.  Then a yellow frame will appear: Formatting Card. (At this step, please be patient while the memory card is formatted.)
7. When formatting the memory card is complete, the yellow frame will disappear.
   In this time you can press [ Key to return to recording interface, and dash cam will automatically start recording.

2.2 Install Cam onto Car Windshield
2.2.1 Suggested Installation Location
Host: The best position to install on the car glass behind the rearview mirror.
Rear Cam: The best position to install in the middle of rear windshield in the car.

2.2.2 About Electrostatic Stickers
Introduce:
CD Mask: Please tear off this mask and stick it on the car front windshield
2 Mask: Please tear off this side to stick the recorder
Paste method:
(1) First choose the location where the recorder will be attached, and wipe it with Screen Cleaning Paper.
(2) Tear off the Electrostatic Sticker’s protective film of Masked and stick it on the selected position.
(3) Use scraper to remove the air bubbles between Electrostatic Sticker and the glass.
PS: Please stick it on a flat surface without air bubbles, otherwise it will not be firm!!!
2.2.3 About Install the Bracket
(1) Push 3M Stick Bracket into the bracket slot of the holder rabbet of dash cam from right to left until it clicks.
(2) Tear off Electrostatic Sticker’s protective film of Mask® and the red protective film on 3M Stick Bracket.
(3) Attach the bracket to Electrostatic Sticker, press for about 10-20 seconds, and let Electrostatic Sticker and the 3M stick fully fit firmly.
PS: Please be sure to press firmly. And look through outside glass of car to confirm whether it is fully fitted!!!
2.3 Install Power Cord
2.3.1 About Parking Monitoring Power Cord
Please check with another manual:
‘TiESFONG Hardwire Kit With Radar User Guide’.
2.2.3 About Install the Bracket

1.  Push 3M Stick Bracket into the bracket slot of the holder rabbet of dash cam from right to left until it clicks.
2. Tear off Electrostatic Sticker’s protective film of Mask® and the red protective film on 3M Stick Bracket.
3. Attach the bracket to Electrostatic Sticker, press for about 10-20 seconds, and let Electrostatic Sticker and the 3M stick fully fit firmly.

PS: Please be sure to press firmly. And look through outside glass of car to confirm whether it is fully fitted!!!

2.3 Install Power Cord
2.3.1 About Parking Monitoring Power Cord
Please check with another manual:
‘TiESFONG Hardwire Kit With Radar User Guide’.
2.3.2 About Car Charging Cable

1. Plug the car charger into car’s cigarette lighter port.
2. Use Pry Bar to carefully run the power cord along the slit on the edge of the windshield and hide it inside the car slit.
3. Connect the TYPE-C USB port on the power cord to the power port of the dash cam.
4. Start your car, dash cam will auto power on and start recording.

2.3.3 About Rear Lens Power Cable

1. Please confirm whether the BMW 4-pin connector between Rear Lens Cable and Power Cable is fully connected.
2. Insert the 2.5mm round hole interface of the rear lens into the Rear Lens interface of dash cam.
3. Use Pry Bar to carefully run the power cord along the gap in the roof and hide it up to rear windshield inside the car.
4. Confirm the position of the rear lens to be installed, and tear off the protective film of rear lens 3M Stick Bracket and stick it on.

Basic Operation

3.1 Power ON/OFF
Once the car starts on, dash cam will automatically power on and start recording.
A. Manually
Long press Key to power it ON or OFF.
B. Automatically
The camera will power off if the charger cable is disconnected or if your car is turned off.
3.2 Recording Interface
When Rear Cam isn’t connected, the recording page displays:
[ Left Side (Front Cam) + Upper Right Side (Left Cam)
+ Lower Right Side (Right Cam) ] Short press Key to switch the lens screen:
First: Front Cam Second: Left Cam
Third: Right Cam Forth: Front Cam+Left Cam+Right Cam
When Rear Cam is connected, the recording page displays:
[ Upper Left Side (Front Cam) + Upper Left Side (Left Cam) +
Upper Right Side (Rear Cam)+Lower Right Side (Right Cam) ] Short press Key to switch the lens screen:
First: Front Cam Second: Front Cam+Rear Cam
Third: Rear Cam Forth: Left Cam
Fifth: Right Cam Sixth: Front Cam+Left Cam+Right Cam
3.2.1 Key Functions In The Recording Interface
Key: Short press is to turn ON/OFF the screen; Long press is to switch the power ON/OFF.
Key: Short press to enter the menu function setting; Long press to enter the playback mode.
Key: Short press is to lock the video file; Long press is to Open/Close the voice recording.
Key: Short press is to switch the lens display page; Long press is to take a photo.
Key: Short press is to Start/Stop recording; Long press to turn ON/OFF WIFI.

3.3 Menu Settings Interface

1. After powering ON the camera, press Key to enter the Menu interface.
2. After entering the Menu interface, you can press  Key and Key to switch to the function setting you want, and then press Key to confirm the entry
3. Enter to each function setting, press Key and Key to switch options, and press Key to confirm your selection.

3.3.1 Key Functions In The Menu Interface
Key. Short press is to turn ON/OFF the screen, Long press is to switch the power ON/OFF
Key: Short press is the return function
Key: Short press is to switch to the previous selection
Key: Short press is to switch to the next selection
Key. Short press is to confirm the function

3.4 Playback Interface

|
---|---

1. In the recording interface, long press Key to enter the playback interface.
2. After entering the playback interface, you can press Key and Key to switch to the video file you want, and then press Key to confirm enter.
3. In the Video File Selection Interface, short press key to enter the menu setting interface of playback mode.
4. After menu setting interface, you can press Key and Key to switch to the function setting you want, and then press Key to confirm enter.
5. Enter to each function setting, press Key and key to switch options, and press Key to confirm your selection.

3.4.1 Key Functions In The Playback Interface

Key: Short press to turn ON{OFF the screen; Long press to switch the power ON/OFF
Key: Short press to enter the setting page of the playback;
Long press first to the Image file selection interface;
Long press second to return the recording interface.
Key:. Short press to switch to the previous file
Key: Short press to switch to the next file
Key: Short press to confirm the function

3.4.2 Key Functions When playing a video
Key: Short press to turn ON/OFF the screen,
Long press to switch the power ON[OFF
Key. Short press to enter the setting page of playback,
Long press to return to the video file selection interface
Key. Short press to pause playback

3.5 WIFI Function
3.5.1 WIFI Function Instructions

1. Scan the QR code on your mobile phone to download the APP or search for “Tascam” on the collected pop store to download and install
2. WIF] Name (SSID): FS DASHCAM_(WIFI Serial Number)
3. WIF1 password (PWD): 12345678 (Initial Unified Password)

3.5.2 WIFI Connection Steps
A- Turn on the WIFI function of the dash cam (Long press 2 seconds to turn on the WI FL in dash cam.)
B: Enter the WLAN interface of the phone settings, find FS_DASHCAM_XX
C: Enter the password to connect the WIFI account of dash com
D: Open the ‘TsCam’ APP to connect the WIFI account
PS.

https://ligohk1.oss-cn-hongkong.aliyuncs.com/app/tscam/tscam.html

1. It is not recommended to modify the WIFI Name
2. If you need to modify the WIF] password, please connect to the APP to modify it on the settings.
3. If the 551D of the machine cannot be found in the “WLAN” list in your phone settings, please restart the WLAN and swipe the ‘NETWORKS’ list.

3.6 View Playback On Computer
3.6.1 Folders in the memory card
‘Event’ -Lock video file
‘Normal’ -Normal recorded video file
‘Parking’ -Parking monitoring video file (No function for now.)
‘Photo’ -Photos captured by the recorder
‘Share’-Alternate folder (No function for now.)
PS:

1. The video files in the ‘Event’ folder are protected files.
   Please be careful when deleting them.
   If there are important videos, please back them up.

2. The video files of driving record and parking monitoring are saved in the Normal folder.

3.6.2 Computer View File Description

1. Pull out the used TF Card from dash cam and insert it into the Card Reader.
2. Connect the Card Reader to the USB port of the computer, open the removable disk.
3. When playing videos or browsing photos, the corresponding software needs to be installed on the computer.
4. Please select the equivalent folder to view the video you want.
5.  After viewing, please insert the memory card directly back into the card slot of recorder. (Recommended not to format it on the computer.)
6. About Backup Files
   a. If you want to store important and wonderful video or photos for a long time, it is recommended to copy the files in the memory card to a computer for storage.
   b. Do not create a new folder storage on the memory card, which will reduce the effective use of memory card space.

Specifications

Sensor: Galaxy Core GC4653+GC2053
Random Access Memory| 2GB
Rear Cam| Optional (S20—Non-Waterproof)
Rear Cam Power Cable| 2.5mm Round hole interface and 5.5 meters length
Channels & Recording Range| 3 CH (Record Front/Left/Right)
4 CH (Record Front/Left/Right/Rear)
Lens Parameters| Front: F1.6 aperture & 140°wide angle Left / Right / Rear:
F1.8 aperture & 140°wide angle
Video Format| MP4(H2.65)
Photo Format| JPG
Screen| IPS HD Screen
Lens screen display| Display separately or simultaneously
Languages| Simplified Chinese / English / Traditional Chinese / Multi-lingual
Audio| Built-in microphone and speaker
Internal memory| None
External Memory| Support 64-256G
Power Port| Type-C
Supported Car voltage| 12V-24V
Work current voltage| 5V 2.5A
Operating Temperature| -30°C-70°C
Built-in lithium battery| None
Button Battery| Built-in RCT button battery
24-H Parking Monitoring| Optional

More Precautions

5.1 About Memory Card

1.  Please use a genuine Micro SD card with the 64G(Manly)- 256G(MAXI) of Class 10, U3 Speed or above.
   We recommend using Class 10, U3 of LEXAR High Endurance TF cards.

2.  Please insert or remove the Micro SD card when dash cam is turned off. (Do not operate it when it is powered on).

3. Please do not take the card out when dash cam is recording in case that the important video files missing.

4. When you insert a new card, please format the card on the Dash Cam before you use it.
   You can find the Format option on the menu of Dash Cam.

5. The memory card may become damaged or deteriorated after repeated cycles of overwriting, and this may affect its ability to save video and image files.
   If this occurs, immediately replace it with new memory card.

6. The micro SD card should be formatted once a month to maximize the lifetime of the memory card.

5.2 About Precautions on using

1. The screen in host is just a preview, not the original views.
   It looks best when the memory card is plugged into computer.

2. This product is an auxiliary device for recording external images of the vehicle.
   Due to the different driving environment and car environment, some functions will not be supported, so the driving images of this product recorder are for reference only.
   The status of the TF card will also cause the situation that recording cannot be performed.

3. Do not install or operate this product when the car is running.
   Please operate in the safety environment.

4. Do not connect the uninterruptible power supply without authorization, otherwise it may cause the failure of the car or product.
   Please consult a professional for installation matters.

5. Do not allow this product to receive strong impact or shock, so as not to damage the product, resulting in malfunction or unitability.

6. When cleaning or repairing the car, please stop using or please remove our machine.

7. Please use it within the scope permitted by law.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment  generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ENJOY YOUR PRODUCT!
THANKS FOR CHOOSING TiESFONG!
Made in China
https://tiesfongaliexpress.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>