AVer VB130 4K Conference Camera User Guide

AVer VB130 4K Conference Camera User Guide

Package Contents

*The power cord will vary depending on the standard power outlet of the country where it is sold.

Optional Accessories

Overview

1. Lens
2. LED Indicator
3. Fill Light
4. Speaker
5. Microphone Array Area
6. (5 Built-in Microphones)
7. Color Sensor
8. IR Sensor
9. Ethernet Port
10. USB 3.1 Type-B Port
11. Color Temperature Button
12. Mini USB Port
13. USB 2.0 Type-A Port
14. (Only for Wireless Dongle*)
15. DC 12V Power Jack
16. Light Level Button
17. Kensington Lock
18. Velcro Strap

*Wireless dongle is an optional item in certain countries. Please contact your local dealer for purchasing.

LED Indicator

Power on: Blink blue once
Start-up: Solid red
Sleep mode: Solid orange
Standby or a call on hold: Solid white
In use: Solid blue
Calling: Fast blink white or blue depending on original status
During a call: Solid purple
A second calling: Fast blink white, blue, or purple depending on original status

Control Fill Light

• Hold either temperature button or light level button for 2~3 sec to switch on/off fill light function.
• Hold both temperature button and light level button together for 2~3 sec to switch between auto/manual light adjustment.
• For more details, please refer to user manual.

Remote Control

[Note] AAA batteries required
*Not supported for VB130

• SmartFrame ( ): One-click automatic FOV adjustment to fit all participants in screen for one time. Press and hold the button for 1~2 sec to switch from manually to auto framing mode or Off.
  Audio AI Control ( ): Press and hold the button for 1~2 sec to switch modes among Audio tracking, Audio frame, Audio Preset Tracking, Presentation mode, Audio fence and Off.
  [Note] Audio AI function supports up to 3 meters far from camera.

• ◼Bluetooth ( ): Hold it for 1~2 sec to enable Bluetooth pairing with mobile phone. Short press it  again to disconnect Bluetooth. [Note] Wireless dongle is an optional item. Please contact your local dealer for purchasing.

• ◼ Enter ( ): Press it to show the current AI function on screen such as Auto Framing.

• ◼ Load Preset Hotkey ( ): Press it to move to preset position as user has set in sequence.

• ◼ Number 0~9: Long press the number button to set preset point. One-click the number key to load preset point.

• ◼ FOV: Press then to change field of view.

• ◼ WDR: Press then to enable/disable the WDR function.

• ◼ Presentation mode: Press then to setup presentation area while under presentation mode..

• RTMP: Press then 3 to enable/disable the RTMP streaming function.

• Long press either button for 1~2 sec to turn on/off the fill light function.

• When fill light is off, press button to increase/decrease image brightness.

• When fill light is on, press button to increase/decrease light level.

Installation

1. Connect VB130 to PC/laptop with provided USB 2.0 cable and connect the power cord of VB130 to power wall outlet.
   [Note] Use the supplied Velcro strap to secure and manage the cable.
   

2. Install wireless dongle. Plug it into the USB 2.0 type-A port. Use remote control or PTZApp 2 to enable Bluetooth function. Enable Bluetooth of mobile phones to find VB130 and connect it to use
   VB130 as external microphone and speaker during a conference meeting.
   
   [Note] The wireless dongle is an optional item in certain countries. Regarding detailed settings of Bluetooth, please refer to user’s manual.

Install PTZApp 2

Please go to https://www.aver.com/download-center (Global & European Headquarters) or https://www.averusa.com/business/support/ (USA) to download the PTZApp 2. After downloading,
double-click on the file and follow the on-screen instructions to complete the installation. After installing the PTZApp 2, double-click on the PTZApp 2 icon to run the application.

Use PTZApp 2

You can use the PTZApp 2 to set up AI tracking functions, pan, tilt and zoom the camera and some advanced image and audio settings. Please refer to the user’s manual for details.

FEDERAL COMMUNICATIONS COMMISSION

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operate din a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compl iance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
This Class A digital apparatus complies with Canadian ICES-003.

Caution:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>