lightmaXX LIG0016268-500 Nano Truss Light Mobile MKII User Manual

June 13, 2024
lightmaxx

lightmaXX LIG0016268-500 Nano Truss Light Mobile MKII

Product Information

The lightmaXX Nano Truss Light Mobile MKII is a portable lighting fixture designed for truss lighting applications. It is equipped with various features, including a remote control, DMX operation, and multiple lighting modes. The device is manufactured by LightmaXX and distributed by Music Store professional GmbH.

Product Usage Instructions

Installation:

  1. Read the user manual before connecting the device.

Startup:

  1. Connect the device to a power source using the included power cable.
  2. The device can also be operated using batteries.

Remote Control:

  • Use the remote control to operate the device in static, auto, or sound mode.
  • The remote control allows you to turn on/off the device, control the LCD display, and view temperature.

DMX Operation:

Use the DMX mode to configure the device using a DMX controller.

Kanal-Modus (4 Channel Mode):

Kanal Wert
1 000-255
2 000-255
3 000-255
4 000-255

Kanal-Modus (6 Channel Mode):

Kanal Wert
1 000-255
2 000-009
3 010-255
4 000-255
5 000-255
6 000-255

Kanal-Modus (8 Channel Mode):

Kanal Wert
1 000-255
2 000-255
3 000-255
4 000-255
5 000-255
6 000-009
7 010-255
8 000-255

Troubleshooting:

  • If the device does not function, try using an alternative DMX controller.
  • If there is no response from the device’s remote control, replace the battery.

Cleaning:

Clean the device according to the instructions provided in the user manual.

Environmental Protection:

Dispose of the device and its components in accordance with local environmental regulations.

For further assistance, please contact:

  • Tel: +49 221 8884-0
  • Fax: +49 221 8884-2500
  • Email: info@musicstore.de
  • Product ID: LIG0016268-500 03/2022

Important safety instructions! Please read before connection!

  • DANGER! (Electrical shock due to high voltages in the device)
    The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage.

  • Before each use, check the device for damage or the absence of components, protective devices or housing parts. If this is the case, the device must not be used!

  • Leave maintenance and repair work to a qualified service workshop or contact your dealer. In the case of a malfunction of the device, operation must also be stopped immediately until the device has been repaired by a specialist!

  • DANGER! (Electric shock due to short circuit)
    Modifications to the power cord or plug are prohibited. If the power cord is damaged, it must be replaced immediately with an original spare part from the manufacturer. Failure to do so may result in fire or death due to electric shock!

  • DANGER! (For babies and children)
    Dispose of or store any packaging material properly! Packaging material must be kept out of the reach of babies and children due to the risk of suffocation.
    Ensure that children never use the appliance unattended! In addition, make sure that children do not remove (small) parts from the device, as they could suffocate by swallowing parts!

  • WARNING! (High light intensity – eye injuries)
    A direct view into the light source is absolutely to be omitted!

  • WARNING! (Epilepsy)
    Stroboscopic effects (flashes of light) can trigger seizures of epilepsy in some people. Accordingly sensitive people should be warned and should not be in the vicinity of such devices.

  • Hint! (Fire hazard due to overheating)
    The maximum permissible ambient temperature of this device is 40°C.
    Ensure that the unit is placed in a well-ventilated location away from direct heat sources, naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
    Do not tape or cover the ventilation slots of the unit.

  • Hint! (Operating conditions)
    Due to its structural characteristics, the device is designed for indoor operation (IP20). Never expose the device to rain, moisture or liquids as this may cause damage.
    Vibrations, dust or sunlight can also cause damage, avoid them!

  • Hint! (Power supply)
    It is essential that you check that the device voltage matches your local mains voltage. It is highly recommended that you fuse your mains socket with a residual current circuit breaker (FI).
    If you do not use your device for a longer period of time or carry out maintenance work, disconnect the device from the mains in order to minimize danger. The same applies to storm conditions such as thunderstorms, floods, etc.

  • Hint! (Error during data transmission)
    Never connect the DMX input or output to audio devices such as power amplifiers or mixing consoles!
    DMX cables enable trouble-free operation and the highest possible transmission reliability of signal data. Do not use microphone cables!

  • Hint! (Condensation)
    To avoid condensation in the unit, the unit should adapt to the ambient temperature before commissioning.

  • Hint! (Unwanted odours)
    A new product can sometimes lead to unwanted odours. This reaction is normal and disappears after a few minutes.

Symbols on device and packaging

  • The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock.
  • The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual.
  • Only suitable for indoor use.
  • This symbol defines the minimum distance of the object to be illuminated.
  • Read the manual

Please read and follow the warnings and recommendations carefully to ensure safe and trouble-free use.

Installation

Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use.
The unit can be installed either upright or suspended. The device must always be attached to a solid, approved carrier or a suitable surface. Note the load limit of the selected installation position (e.g. for tripods).
The opening of the bracket must be used to fasten the device. Always provide a second, independent safety backup for the device, e.g. with a safety cable.
Work on the device (e.g. assembly) should always be carried out from a stable and permissible platform. Make sure that the area below you is closed off.

WARNING! (Risk of injury due to falling down)
Improper installation can cause considerable injury and damage!
The installation of the device should always be carried out by experienced personnel and must be carried out in compliance with the mechanical and electrical safety regulations in your country.

Please note that it is not possible to use this device with a dimmer!

Congratulations on your new LightmaXX Nano Truss Light Mobile MKII!
Thank you for choosing a LightmaXX product. Through efficient development and economical production, LightmaXX enables high quality products at a fantastic price.
Please read the instruction manual carefully to learn about all the features of this product and keep it for future use.

Have fun with your new product!

Your LightmaXX Team

Guarantee:
The current general terms and guarantee conditions of the Music Store professional GmbH apply.
You can view it at: www.musicstore.de
If you have any questions or suggestions, please contact us:

Music Store professional GmbH Istanbulstr. 22-26 51103 Cologne Managing Director: Michael Sauer WEEE-Reg.-No. DE 41617453
Tel: +49 221 8884-0
Fax: +49 221 8884-2500
info@musicstore.de

Connections and controls:

No. Designation No. Designation
1 LEDs 7 Power Out (IEC)
2 LCD-Display 8 Switch on/off for Battery operation
3-7 Menu-Buttons 9 Power-Switch on/off
8 IR-Sensor 10 Mounting Point
9 Safety-Eye 11 DMX In (3pol XLR)
10 Power In (IEC) 12 DMX Out (3pol XLR)

Intended use

The LightmaXX Nano Truss Light Mobile MKII was designed for use as an electronic LED lighting effect. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
It must be ensured that the device is operated exclusively by trained and competent users who are in full possession of their mental, physical and sensory abilities. The use of other persons is expressly only permitted at the request of a person responsible for their safety, who instructs or supervises the use.
All connections of the device should be made before switching on. Only use high-quality cables that are as short as possible for the connections.

Operation

The device can be powered by mains voltage and the built-in rechargeable battery.

  1. Mains operation
    Connect the device to the mains and wait a few seconds until it is ready for operation. The Power Out socket on the back of the device can be used to power another device. To do this, connect the output to the mains connection of the next device.

  2. Battery operation

    • Before the device can be operated for the first time, the built-in battery must be fully charged. Switch the unit on with the charger switch and connect the unit to an electrical outlet using the supplied power cable.
    • The battery life depends strongly on the operating mode and the brightness of the LEDs. The battery life is at least 5 hours if all LEDs light up after complete charging, up to 15 hours in automatic and single colour mode.
    • When the battery is fully charged, all four LEDs on the back of the unit will turn green. The charging time is 6 to 8 hours.
    • The charge level is indicated by green and red LEDs on the back of the unit. If all four LEDs are green, the battery is fully charged. If only one green LED lights up, the battery will soon be exhausted and must be recharged. The device can still be operated for a few minutes in this state. It then switches off automatically due to the protection circuit against deep discharge.

Navigation in the menu is via the four menu buttons below the display. Use the “Menu” button to activate the menu, navigate via the “Up” and “Down” buttons. A corresponding selection is confirmed with the “Enter” key. The corresponding menu item can be exited by pressing the “Menu” key.

The menu structure in detail:

Display Menu Function
A(XXX) A001-A512 Start adress
CHND 4CH/6CH/8CH 4/6/8 Channel DMX-Mode
CL(XX) CL01-CL15 Auto Color setting Red Green blue and White
CC(XX) CC01-CC99 Jumping Color changes (01-99 Speed)
EE(XX) EE01-EE99 Fading on and off color changes (01-99 Speed)
FF(XX) FF01-FF99 Fading color changes (01-99 Speed)
ST(XX) ST00-ST99 Strobe speed

(00 Aus, 01 – 99 from slow to fast)

SOU(X)| Sou1/Sou2/Sou3| Sounactive Programs 1-3
Sou4| combination Sou1-3
SE01-99| Microfone sensitivity

(00 Off, 01 – 99 to very sensitivl)

nAnu| R000-R255| Red ( manual color setting )
G000-G255| Green ( manual color setting )
B000-B255| Blue ( manual color setting )
u000-u255| White (manual color setting)
IRCL| On/ Off| Remote on/off
LED| On/ Off| LCD-Display on/off
T(XXX)| T000 – T100| Temperature display

Static, Auto or Sound mode:

The device contains automatic programs that run according to fixed schemes (Auto) or are recalled via the built-in microphone to match the music (Sound). The selection of the respective mode takes place via the menu directly on the device.
If you connect several devices of the same type via DMX, they can be controlled simultaneously via the master device. To do this, set the desired function “Master” on the first device of the line, the other devices of the series must now be set as “Slave”. Now the first device of the line gives the function to all other devices and all devices run simultaneously.

Remote control mode:
The device can be managed remotely using the remote control included in the scope of delivery. The respective functions can be performed using the various program selection or color keys.

Operating mode DMX

Connect the DMX input of your device to the DMX output of your DMX conntr troller, your DMX software or the DMX output of a device already in your DMX line. Always us use a se a DMX cable with a 110 Ohm resistor for this connection. Address the device according to youur Dr DMX configuration. The following table shows the respective DMX modes of the individual devvi ce ices with the corresponding values and functions:
For ideal operation in a DMX chain, it is recommended to use a terminatin ngg resistor at the end of each DMX chain. The terminating resistor is usually soldered with 120Ω beetwe tween – Data and + Data to prevent signal reflections.

Configuration oft he DMX connector

lightmaXX-LIG0016268-500-Nano-Truss-Light-Mobile-MKII-
fig-4 4 Channel-Mode:

Channel Value Function
1 000-255 Redt Dimmer (from dark to light)
2 000-255 Green Dimmer ( from dark to light )
3 000-255 Blue Dimmer ( from dark to light )
4 000-255 White Dimmer ( from dark to light )

6 Channel-Mode:

Channel Value Function
1 000-255 Master Dimmer (from dark to light)
2 000-009 No function
010-255 Strobe (from slow to fast)
3 000-255 Red Dimmer (from dark to light)
4 000-255 Green Dimmer (from dark to light)
5 000-255 Blue Dimmer (from dark to light)
6 000-255 White Dimmer (from dark to light)

8 Channel-Mode:

Channel Value Function
1 000-255 Master Dimmer (from dark to light)
2 000-255 Red Dimmer (from dark to light)
3 000-255 Green Dimmer (from dark to light)
4 000-255 Blue Dimmer (from dark to light)
5 000-255 White Dimmer (from dark to light)
6 000-009 No funtcion
010-255 Strobe (from slow to fast)
7 000-009 No funtcion
010-050 15 Static color
051-100 Jumping Color changes
101-150 Fading on and off color changes
151-200 Fading color changes
201-220 Sounactive Jumping Color changes
221-240 Sounactive Fading on and off color changes
241-255 Sounactive Farbwechsel überlblenden
8 000-000 No funtcion
001-255 Speed of Programs (from slow to fast)

Specifications:

Model lightmaXX Vega BAT LED
Color mix RGBW
Light source 3 x 4W
Power consumption 20 Watt
Lamp rated life >50000 Hours
Battery 4400Mha
Battery working time (+/-) 6 hours with Full color
Modes of operation Automatic, Sound-to-Light, Master/Slave, DMX, IR-

Remote
DMX Modes| 4, 6 and 8 channels
Display| LCD
Connections| DMX In/Out (3-pol), Power In/Out
Outdoor compatible| No
Power Supply| 220-240V AC, 50/60Hz
Dimensions (L x W x H)| 124 x 110 x 172 mm
Weight| 1,13 Kg

Troubleshooting

The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the device on your own!

Symptom Troubleshooting
No function Check the mains connection and the fuse

No reaction in DMX mode

| Check the cable connections
Check your DMX address setting
If available, try an alternative DMX controller

No reaction in remote mode

| Change the battery in your remote control
Ensure that the IR transmitter and receiver are at close and clear distances from each other

If the specified corrections have not led to success, please contact our service staff. The contact details can be found at www.musicstore.de

Cleaning

Regular cleaning of the device from dirt and dust increases the shelf life o e off th the product. Always disconnect the device from the power supply before cleaning it! Never cleaean the appliance wet! Optical lenses should be cleaned with a dry microfiber cloth to optimize ligighht output. Ventilation grilles and openings should always be cleaned of dust and dirt. Suitable cocom mpressed air sprays are recommended for this application.

Envrionmental protection:
The company MUSIC STORE professional GmbH always strives to reduce ththe burden of packaging to a minimum. The use of environmentally friendly and recyclable materia a lls is s is of fundamental importance to us. Please dispose of and recycle the packaging componentsts after use properly.

  • Disposal of packaging:
    Ensure that paper packaging, plastic materials, etc. are separately recy recycled. Observe the corresponding disposal instructions on the packaging.

  • Disposal of batteries:
    Batteries do not belong in the garbage! Please keep batteries in a accoccordance with the official collection points or disposal stations in accordance with the spe specifications.

  • Disposal of your old device:
    Do not dispose of the device with household waste! This device is s su subject to the WEEE Directive (Waste Electrical and Electronic Equipment) in its curren ntltly valid version.

The device will be disposed of by an approved waste disposal company or r y your local waste disposal office. The regulations valid in your country must be observed!

Manufacturer: MUSIC STORE professional GmbH, Istanbulstraße 22-26, 51103 Cologne, Germany

MS ID: LIG001626-500 03/2022

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals