CREATE ERC51 Antenna Rotators Instructions
- June 13, 2024
- CREATE
Table of Contents
ERC51 Antenna Rotators
Instructions
Elevation Rotator ERC-5x Series
-
ERCS51
For Middle Sized Antenna Elevation
Easy Installation/Uninstallation for
Preassembled Antenna
Installable for KT-Series Elevation
This CD model ERC51 is designed for azimuth elevation control for light weight to medium sized antennas with easy installation and cost effectiveness. Installation can be done very easily by using U-bolt than allows to mount such a preassembled type of stacked antenna without dismantling any components of antenna. In couple with EME, it helps a lot to derive a unique performance expected the communication through these Sporadic-E,ratio duct, and mountain diffraction, diffused reflection communications etc. by varying elevationangle. -
ERC5A
For Big Sized Antenna Elevation
Easy Installation/Uninstallation for
Preassembled Antenna
Adapted A Rust Resist High
Tension Chain
This CD model ERCSA is designed for elevation control for an exceptionally big antennas of large rotating torque with high accuracy. With highly selected and unique materials of anti-corrosion and high durability, it is ideal for big and heavy antenna such as large stacked Yagi array, parabolic antenna or an experimental use of EME antennasetc.
SPECIFICATIONS
| Model | ERC51 | ERC5A | ERC51D |
|---|---|---|---|
| Rotating Torque (kg/m) | 7 | 10 | 5 |
| Brake Torque (kg/m) | 100 | 300 | 100 |
| Mast Diameter (mm) | 48-62/Mast 4060/Boom | 4862/Mast 5577/Boom | 4862/Mast |
40-60/Boom
Vertical Load (kg)| 50| 250| 50
Horizontal Load (kg)| 200| 600| 200
Speed Sec.| 50MHz/90°| 25 – 55| 75 – 110| 18 – 60
60MHz/90°| 20 – 45| 60 – 95| 18 – 60
Reversal Time (sec.)| 0
Preset Function| Provided
Preset Accuracy| ± 3 0
Power Requirement| 150VA| 12 – 15VDC
Indicator Accuracy| Less than ± 4 °
Weight (kg)| 8.0| 19.0| 8.0
Notes:
- ERC 5 x is PC trac kerconnec table type.
- Power Requirement is 100VA C,Controlcable requires 7-core.(*ERC 51 D C: 12 VDC, 6-core)
- Those models which attac hes 25 mlongca bleareal soav ailable.
Integrated Rotator for Satellite Tracking AER-5
- AER-5
Azimuthand Elevation for a Middle Sized Antenna
Integrated Type For Azimuth And Elevation
Easy Installation/Un-installation For
Pre-assembled Antenna
High Cost Performance
(Low-Priceand with Many Features)
Fast Rotation and Suitablefor Satellite Tracking
AER-5 is anintegrated type of rota or bothazimu than delevation designed for installation of a middlesized azimuth and elevation antennas. Theazimut hro tatoroft his model is especially designed to present a fast speed rotation considering for use of a satellite tracking.
SPECIFICATIONS
| Model | AER-5 Azimuth/Elevation |
|---|---|
| Rotating Torque (kg/m) | 6/7 |
| Brake Torque (kg/m) | 90/100 |
| BoomDiameter (mm) | tp 40-62 |
| Vertical Load (kg) | 50 |
| Horizontal Load (kg) | 200 |
SpeedSec
50MHz| Azimuth| 35 – 150/360 °
Elevation| 25 – 55/ 90 °
Reversal Time (sec.)| 1/0
Preset Function| Provided
Preset Accuracy| ± 3 ° /± 3 0
Power Requirement| 90VA/150VA
Indicator Accuracy| Less than ± 4 ° / ± 4 °
Weight
(kg)| Rotor| 12.0
Controller| 3.0
Notes:
- Thismodel is PC tracker connectable type.
- Power Requirement is 100VAC, Control cable requires 7-core.(x2sets)
- This model which attaches 25m(x2sets) long cable are also available.
Accessory/Optional
★ CK46 MAST BEARING (Mast Dia. 40-65mm)
The model CK46 is an unique mast bearing. earings used is made of conical-
shaped advanced engineering plastics that assures high intensity and smooth
rotation with in the magnesium alloy die-casting housing. Forgriping system,
CK46 uses chuck instead of bolt alone in order to hold the mast tubing with
high gripping force against the supporting Mastwithout giving any damage to
the mast. ★UC-1 UNIVERSAL COUPLER
This universal coupler is designed to absorb the off-swerve for the case that
center of mast axis between thrust bearing and rotator are not being aligned.
For these who wishs to install an antenna on the atubing mast meet the
requirement. ★ MC-2 MAST CLAMP FOR LOWER MOUNT CLAMP
This clamper allows to mount rotator between upper and lower mast. It is
advisable to have supportive guy wire in the upper mast if installed antenna
is large in size and the length of the upper mast it fong.
FOR MAST CLAMP
This MC-2 is bracket for fixing an antenna mast tube too for the case that
antenna rotation is not required. Use this bracket with the Combination of the
thrust bearing CK46. 
★ MOUNT BRACKET FOR TUBING POLE
This mounting bracket enables to mount CO’s rotators and mast bearing to a
tubing type mast. Sturdy steel materials processed with hot-dipped galvanized
assures liable construction. The following four ranges of size are available
in order to meet the outer diameter size.
| No. | Model(Diametermm) |
|---|---|
| 1 | PBP-1(φ 100 ～ 120) |
PRP-1(φ 120 ～ 150)
2| PBP-2(φ 120 ～ 150)
PRP-2(φ 150 ～ 173)
3| PBP-3(φ 150 ～ 173)
PRP-3(φ 170 ～ 214)
4| PBP-4(φ 170 ～ 214)
PRP-4(φ 205 ～ 260)
PBP : Bearing Bracket
PRP : Rotator Bracket
*Leaving-space between PBP-x and PRP-x is approx.1.8~2.3m.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>