MOUNTUP MM09N-US2.0 Single Laptop Mount with Tray Instruction Manual

MOUNTUP MM09N-US2.0 Single Laptop Mount with Tray

Product Information

Specifications

• Monitor Size : 32 inches
• Laptop Size : 17 inches
• Weight Capacity: 9 kg (19.8 lbs)
• Model Number: MM09N-US2.0

Product Usage Instructions

Must Check Before Installation
Before installing the mount, please ensure the following:

1. Check if your monitor or laptop is compatible with the mount. The maximum VESA size supported is 100mm.
2. Ensure that the weight of your monitor or laptop, including accessories, is less than 9kg (19.8lbs).
3. Check if your desk thickness is within the range of 10-50mm (0.39-1.97 inches).
   If the mount is not compatible, please contact our customer service for assistance.

Supplied Parts List
The following parts are included in the package:

• Pole (x1)
• Pad (x1)
• Swivel Arm (x1)
• VESA Plate (x1)
• Clamp (x1)
• Bracket (x1)
• Bolt (x1)
• Bolt Y (x1)
• Washer Clip Plate
• M4 Nut (x4)
• Bolt M6 (x1)
• Spacer L10mm (x4)
• Wire Clip F1 (x1)
• Wire Clip F2 (x2)
• Allen Key 6mm (x1)
• Allen Key 5mm (x1)
• Allen Key 3mm (x1)
  Note: Not all hardware included will be used.

Assembly Steps

Follow these steps to assemble the mount:

• Step 1: Apply Pad to the Pole Bottom
  Apply the pad (e) to the bottom of the pole (a) to avoid desk scratches.

• Step 2: Clamp Installation OR Grommet Base Installation
  Choose one of the following options for installation:

  • Option A: Clamp Installation
  1. Mount the clamp (d) to the bottom of the pole (a) by tightening the bolts (B) with a 5mm Allen Key (G).
  2. Adjust the clamp width to fit your desk and secure the stand to the desktop by tightening the clamp (d).
  • Option B: Grommet Base Installation
  1. If there is a plastic protector in the existing grommet hole, remove it to ensure a flat surface.
  2. Detach the bracket (d1) and bolt Y (d2) from the clamp (d).
  3. Position the pole (a) on the mounting surface and secure it by tightening the plastic knob after passing the bolt Y (d2) through the bracket (d1), desk hole, and the bottom of the pole (a) sequentially.

• Step 3: Install Arm to the Pole

  • Install the wire clip (F1) and swivel arm (b) to the pole (a).
  • Fasten the bolt with the supplied Allen Key (G 6mm).
  • Attach the wire clip (F2) to the swivel arm (b).
    Note: Do not move the stand outside the desk for safety.

• Step 4: Attach the VESA Plate to the Laptop Tray or Monitor
  Choose one of the following options based on your device:

  • Option A: Laptop
    Attach the VESA plate (c) to the laptop tray (f) using screws (A1) and nuts (A2).

  • Option B: Flat Back Monitor|
    Attach the VESA plate (c) directly to the monitor.

  • Option C: Curved Back Monitor
    Attach the VESA plate (c) to the monitor using screws (D) and spacers (E).

• Step 5: Hang Laptop Tray
  

  • Slide the laptop tray onto the head of the swivel arm (b).
  • Install the security bolt (A3) before rotating the laptop tray.

FAQ

• What is the maximum weight capacity of this mount?
  The maximum weight capacity of this mount is 9 kg (19.8 lbs).

• What is the maximum VESA size supported?
  The maximum VESA size supported is 100mm.

• Is this mount compatible with all desks?
  No, this mount is compatible with desks that have a thickness of 10-50mm (0.39-1.97 inches).

• Can this mount be used for children?
  No, this product contains small items that could be a choking hazard if swallowed. It is not suitable for children under 3 years old and adult supervision is required.

PRODUCT SPECIFICATION

• Monitor
  • 32″
  • 75×75mm
  • 9 kg
• Laptop:
  • 17″
  • 100×100mm
  • 19.8 lbs

WARNING!

• Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
• This product contains small items that could be a choking hazard if swallowed. NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Must Check Before Installation

1. Is your monitor VESA 75×75mm/3×3″ or 100×100mm/4×4″?

2. Is the weight of your monitor or laptop (including accessories) less than 9kg (19.8lbs)?

3. Is your desk thickness 10~50mm (0.39~1.97”)?

Supplied Parts List

ASSEMBLY STEPS

Warm Tips You could also refer to the Video Guide about installation on our product page.

• STEP 1: Apply Pad to the Pole Bottom
  Apply pad (e) to the Pole (a) bottom to avoid desk scratches.

• STEP 2: Clamp Installation OR Grommet Base Installation
  • OPTION A: Clamp Installation
  1. Mount Clamp (d) to the bottom of Pole (a) by tightening bolts (B) with 5mm Allen Key (G).
  2. Adjust the Clamp width to fit your desk. Secure stand to the desktop by tightening Clamp (d).

  *  **OPTION B: Grommet Base Installation**
  1. If existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk mount.
  2. Detach Bracket (d1) and Bolt Y (d2) from Clamp (d).

  3. Position pole (a) on the mounting surface and then secure it by tightening the plastic knob after making Bolt Y (d2) through the Bracket (d1), desk hole, and the bottom of Pole (a) sequentially.

• STEP 3: Install Arm to the Pole

1. Install Wire Clip (F1) and Swivel Arm (b) to the Pole (a).

2. Fasten the bolt with supplied Allen Key (G 6mm).
3. Attach the Wire Clip (F2) to the Swivel Arm (b).

• STEP 4 : Attach the VESA Plate to the Laptop Tray or Monitor

  • For Laptop
    Attach the VESA plate (c) to the laptop tray (f) with screws (A1) and nuts (A2).

  • For Flat Back Monitor
    Attach the VESA plate (c) to the monitor with M4×12 bolts (D).

  • For Curved Back Monitor
    Attach the VESA plate (c) to the monitor with M4×30 bolts (C) and M4 spacers (E).

• STEP 5 : Hang Laptop Tray

  • Slide the laptop tray onto the head of Swivel Arm (b) as shown in diagram.

  • Install the security Bolt (A3). Make sure the security Bolt (A3) is installed before you rotate the laptop tray.

• STEP 5: (Continued)STEP 6: Make the Necessary Adjustments

  • Fix the tilt angle
    Tighten the bolt with the supplied Allen Key (G 5mm) to fix the tilt angle.
    Note: When tilted, if the monitor sags or does not stay, and if the above method is useless, please feel free to contact our customer service.

  • Fix the swivel angle

  • Use the supplied Allen Key (G 5mm) to make the necessary adjustments.

  • Ignore this step if the arm joint has screwed to the proper tightness.

• STEP 7 : Cable Management
  • Manage the wires and store the Allen keys (G 6mm, 5mm, 3mm) in Wire Clip (F1) for future use.

Caution:
Please be careful to avoid laptop falling off during use.

Product Dimensions

CAUTION AND MAINTENANCE

• Never allow children to climb, stand, hang, or play on any part of monitor or stand.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>