BEA LPR36 Full-Length 36 Inch High-Low Actuator Instructions
- June 13, 2024
- BEA
Table of Contents
LPR36
FULL-LENGTH, 36 INCH HIGH-LOW ACTUATOR
DESCRIPTION
BEA’s LPR36 is a 36 inch actuator that exceeds all local ADA building codes
requiring high and low actuators, eliminating the need to install two separate
devices.
This stainless steel plate utilizes four highly-sensitive membrane switches
that require very little force and ensure actuation across the entire surface.
This functionality enhances accessibility for those with limited mobility or
disabilities.
Available in wireless and hard wire versions, the LPR36 can be conveniently
mounted in a variety of locations.
APPLICATIONS
TECHNICAL SPECIFICATIONS
| Contact Configurations | SPST N.O. |
|---|---|
| Switching Voltage | 0.1 – 50 VDC |
| Switching Capacity | 1 Watt |
| Switching Current | 0.005 – 100 mA DC |
| Operation Temperature | -32 – 212 °F (-35 – 100 °C) |
Material
Base
Face Plate
Switch Actuator
End Cap
Hardware| 6063 Aluminum
304 Stainless Steel
Nylon 66
UL94 ABS
Stainless Steel
Compliance| California Building Code 2013, Page 559, 11B-404.2.9, Exception 2c
*NOT RECOMMENDED FOR USE IN AN ENVIRONMENT WHERE IT WILL BE DIRECTLY EXPOSED TO WATER. FOR EXAMPLE, OUTDOOR, NOT PROTECTED FROM DIRECT RAIN.
**Wireless conversion kit for transmitter replacement or conversion from
hardwired to wireless
DIMENSIONS
DISCLAIMER Information is supplied upon the condition that the persons receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will BEA be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. BEA has the right without liability to change descriptions and specifications at any time.
WWW.BEASENSORS.COM
BEA AMERICAS
RIDC Park West
100 Enterprise Drive
Pittsburgh, PA
T 1-800-523-2462
F 1-888-523-2462
E info- us@BEAsensors.com
79.0079.02 • 20230922
A Halma company