tern Hauler Rack Front Rack for Cargo Bikes Instruction Manual
- June 13, 2024
- tern
Table of Contents
tern Hauler Rack Front Rack for Cargo Bikes Instruction Manual
Weight Limit
Do not exceed 20 kg (44 lb).
Safety
Do not move your bike by the Hauler Rack.
Check that cables and cargo do not interfere with steering and/or braking
before riding.
Secure all cargo before riding. Take care that all straps are tied down and
any loose item is secured.
What’s Included
- Hauler Rack
- Bolt Set x 2 [M6 x 45 mm, M6 Washer and M6 Nut]
- Side Strap x 1
- Cable Strap x 1
Tools Required (not included)
- 5 mm Allen Wrench
- 10 mm Open-End Wrench
Installation
How to Install a Bottle Cage and/or Lock
Tools Required (not included)
- 4 mm Allen Wrench
- Remove Bottle Cage bolts from Rack.
- Position Cage or Lock against the braze-ons.
Tighten Bolts to a torque of 4 Nm – 5 Nm.
Additional Mount
These mounting holes allow you to drill holes in crates and similar objects
and bolt it to the rack.
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR
Limited Warranty from the date of retail purchase by the original
end-user. If a material or workmanship defect arises and a valid claim is
received within the Warranty Period, this Product will be replaced. Mobility
Holdings
cannot be held liable for damages to personal property due to misuse or
improper care and maintenance. This Product Warranty does not, under any
circumstance, cover the replacement or cost of any third party product used
with or connected to the Product.
Tern, the Tern Werd (logotype), the Tern Berd (device), Combo Mount, and
Hauler used alone or in combination are trade names, trade devices or
registered
trademarks of Mobility Holdings, Ltd.
© 2019 Mobility Holdings, Ltd. All rights reserved.
@ tern bicycles
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>