SUNJOE MJ506E-RM 16 Inch Electric Lawn Mower User Manual

: June 6, 2024
: SUNJOE

SUNJOE MJ506E-RM 16 Inch Electric Lawn Mower

SUNJOE MJ506E-RM 16 Inch
Electric Lawn Mower pro

Safety Instructions

IMPORTANT!
Safety Instructions All Operators Must Read These Instructions Before Use
WARNING! This indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION! This indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
DANGER! This indicates a hazardous situation, which, if not followed, will result in death or serious injury.

General Safety

WARNING! This appliance is not intended for use by children or by unassisted, unsupervised persons whose physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance.
Before starting up your machine, please check it carefully for any defects. If you find any, do not start up your machine. Contact your authorized Snow Joe®

Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563). WARNING! When using the pressure washer, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These include:
- Know your product – Know how to stop the machine and bleed pressure quickly. Thoroughly familiarize yourself with the controls.
- Keep bystanders away – All visitors and pets should be kept a safe distance away from the work area.
- Use the right product – Do not use this machine for any job except that for which it is intended.
- Dress properly – Do not wear loose clothing or jewelry. They can get caught in moving parts. Protective rubber gloves and non-slip footwear are recommended when working outdoors.
- CAUTION! – Exercise caution to avoid slipping or falling. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.
- Stay alert – Watch what you are doing. Use common sense. Do not operate the pressure washer when you are tired, or under the influence of alcohol or drugs.
- Do not overreach – Keep proper footing and balance at all times.
- Avoid unintentional starting – Do not carry a plugged-in machine with your finger on the trigger. Make sure the switch is off before plugging in the machine.
- Do not abuse the cord – Never carry the machine by the cord or yank the cord to disconnect it from the receptacle. Keep the cord away from heat, oil, and sharp edges.
- Use safety glasses – Also use safety footwear, snug-fitting clothing, protective gloves, hearing and head protection.
- Check the water temperature – This pressure washer is not meant to pump hot water. NEVER connect it to a hot water supply as it will significantly reduce the life of the pump.
- Store indoors – NEVER store the pressure washer outdoors or where it could freeze. The pump could be seriously damaged.
- Ground Fault Circuit Interrupter (GFCI) – This product is provided with a ground fault circuit interrupter built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts.
- Inspect electrical cables – The insulation of the power cord should be perfectly intact. If the power cord is damaged or shows any signs of wear or tear, do not use the pressure washer. Contact your authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).
- Do not use this appliance without reading this instruction manual.
- This appliance has been designed for use with cleaning agents that are recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance.
- Do not use the appliance within range of persons unless they are wearing protective clothing.
- High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, pets, live electrical equipment, or the appliance itself.
- Do not direct the jet at yourself or others in order to clean clothes or footwear.
- Risk of explosion – Do not spray flammable liquids.
- Risk of injection or injury to persons – Never direct discharge stream at people, pets, or electrical devices.
- Disconnect the tool – Disconnect from the electrical power supply before performing any maintenance task.
- Keep children away – This high-pressure electric power washer must not be used by children or untrained personnel.
- To ensure appliance safety, use only original replacement parts from the manufacturer or those approved by the manufacturer.
- Check for damaged parts – Do not use the appliance if the supply cord or other important parts of the appliance are damaged (e.g. safety devices, high-pressure hoses, trigger gun).
- Power cord connections should be kept dry and off the ground.
- If the power cord is damaged, do not use the appliance. Contact your authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1- 866-SNOWJOE (1-866-766-9563).
- Keep the machine on a stable, flat surface during operation, handling, transportation, and storage. Sudden overturn of the machine can cause bodily injury.
- In the event of an accident or breakdown, switch off the machine immediately. (If contact with detergent occurs, rinse with an abundance of clean water.)

Electrical Safety

ATTENTION : If there are problems with the electrical MAINS, short voltage drops may appear when starting the equipment. This can, in turn, influence other equipment (e.g. cause a lamp to blink). If the MAINS-IMPEDANCE Zmax < 0.335 OHM, such disturbances are not expected. (If you require assistance, contact your local supply authority for further information.)

Electrical Shock Hazard
Before starting up your machine, please check it carefully for any defects. If you find any, do not start up your machine and contact your distributor. The following should be observed when connecting the high-pressure electric power washer to the electric supply:

The electric supply connection should be performed by a qualified person.
The electric supply to this appliance should include either a residual current device that will interrupt the supply if the leakage current to the earth exceeds 30 mA for 30 ms or a device that will interrupt the earth circuit (GFCI).

IMPORTANT
Only use water without any impurities. If there is a risk of running sand into the inlet water (i.e. from your own well), an additional filter should be installed. The unloader valve can reduce pressure if it exceeds preset values. The spray gun features a locking device. When the lock is activated, the spray gun cannot be operated.

Thermal sensor – A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sensor has cooled.
Double insulation – In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe® + Sun Joe® dealer. Replacement parts for a double-insulated appliance must be identical to the parts they replace. A double-insulated appliance is marked with the words “Double Insulation” or “Double Insulated.” The symbol (square within a square) may also be marked on the appliance.
Ground fault circuit interrupter (GFCI) protection – This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plug of the power-supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.
It is not recommended to use an extension cord with this pressure washer. The unit comes standard with a 35 ft GFCI power cable. Using an extension cord may cause a drop in line voltage resulting in loss of power and overheating.
To reduce the risk of electric shock, this appliance has a polarized plug (i.e. one blade is wider than the other). The appliance plug will fit into a polarized outlet only one way. If the appliance plug does not fit fully into the outlet, reverse the plug. If the plug still does not fit, make sure that you are using the correct polarized wall outlet. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not modify the appliance plug, power cord receptacle, or power cord plug in any way. If an extension cord is going to be used. Use only 3-wire extension cord that has 3-prong grounding type plug for the product. Use only extension cords that are intended for outdoor use. These extension cords are identified by marking “Acceptable for use with outdoor appliance; store indoors while not in use”. Use only extension cord having an electrical rating not less than the rating of the product. Do not use damaged extension cords. Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect extension cord from the receptacle before disconnecting the product from the extension cord.
To prevent the appliance cord from disconnecting from the extension cord during operation, make a knot with the two cords as shown in Table 1.
Do not abuse the cord. Never pull the pressure washer by the cord or yank the cord to disconnect it from the receptacle. Keep the cord away from heat, oil, and sharp edges.

Risk of Electrocution

Inspect cord before using.
Do not use if cord is damaged.
Keep all connections dry and off the ground.
Do not touch plug with wet hands.
Keep cord away from heat and sharp edges.
Do not spray electrical apparatus and wiring.

Risk of Explosion

Do not spray flammable liquids.
Do not use acids, bases, solvents, or any flammable material in this product. These substances can cause physical injuries to the operator and irreversible damage to the machine.

Additional Safety Instructions

High-pressure: keep clear of nozzle.
Injection hazard: equipment can cause serious injury if the spray penetrates the skin.
Do not point the gun at anyone or at any part of the body.
In case of skin penetration, seek medical aid immediately.
Before servicing, cleaning, or removing any parts, shut off the power and relieve pressure.
This machine is not suitable for connection to the potable water mains.

Product Description

This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings, facades, etc.

Areas of Application

Never use the machine in potentially explosive areas under any circumstances!
The operating temperature must be between 32ºF (0ºC) and 104ºF (40ºC).
The machine consists of an assembly with a pump, which is encased in a shock-absorbing housing. To provide the operator with an optimal working position, the machine is equipped with a spray wand and a non-slip handle grip, whose shape and configuration comply with applicable regulations.
Do not cover or modify the spray wand or the spray nozzles in any way.
The high-pressure electric power washer is designed to be used with cold or lukewarm water; higher temperatures can damage the pump.
Do not use water that is dirty, gritty, or contains any chemical products, as these could impair operation and shorten the life of the machine.

Know Your Electric Pressure Washer
Read the owner’s manual and safety instructions carefully before operating the electric pressure washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. SUNJOE MJ506E-RM 16 Inch Electric Lawn Mower
2

Transport handle
Upper handle frame
Safety lock
Trigger
Trigger gun
High-pressure hose reel
High-pressure hose
Spray wand
ON/OFF switch (Pressure select dial)
Detergent dial
Garden hose adapter/connection
Transport handle
Upper handle frame
Safety lock
Trigger
Trigger gun
High-pressure hose reel
High-pressure hose
Spray wand
ON/OFF switch (Pressure select dial)
Detergent dial
Garden hose adapter/connection
On-board nozzle storage
Quick-connect collar
Turbo nozzle
. Connecting hose
Needle clean-out tool
0º Quick-Connect nozzle (orange)
15º Quick-Connect nozzle (yellow)
25º Quick-Connect nozzle (green)
40º Quick-Connect nozzle (gray)
Soap Quick-Connect nozzle (black)

Technical Data

Rated Voltage 120V ~ 60 Hz
Motor 14.5 amp (1800 W)
Max. Water Inlet Temperature 104ºF/40ºC
Max. Water Inlet Pressure0.7 MPa
Rated Pressure Low Setting: 870 PSI High Setting: 1450 PSI
Max Pressure* 2030 PSI
Max Flow 1.76 GPM
Rated Flow Low Setting:1.05 GPM High Setting: 1.24 GPM
Detergent Tank Capacity 54.1 fl oz (1.6 l)
Hose Length 20 ft (6 m)
Power Cord Length 35 ft (10.7 m)
Net Weight 32.4 lbs (14.7 kg)

Unpacking

Carton Contents

Upper handle frame + hose reel assembly
Lower handle + pressure washer assembly
Trigger gun
Spray wand
Five (5) Quick-Connect nozzles (0º, 15º, 25º, 40º and Soap)
Turbo nozzle
Needle clean-out tool
High-pressure hose
Garden hose adapter (female coupler)
- Manual with registration card Carefully remove the pressure washer and check to see that all of the above items are supplied.
- Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the Snow Joe® + Sun Joe® customer service center at 1- 866-SNOWJOE (1-866-766-9563).

Assembly

Position the washer as CLOSE as possible to the water supply.
The washer must be used on a secure and stable surface in a standing, upright position (Fig. 1).
Slide the upper handle frame into lower handle then depress the small button at the end of the upper handle frame, push and insert into lower handle until it snaps securely into place (Fig. 2).
Insert the connecting hose into opening, as shown, until it clicks securely in place (Fig. 3).
Fit the spray wand into the trigger gun and rotate it until the two parts are completely locked (Fig. 4).
Connect the high-pressure hose to the trigger gun (Fig. 5).
Connect the garden hose adapter (female coupler) to the water inlet of the pressure washer, then thread your garden hose (male end) into the garden hose adapter (Figs. 6 – 7). The garden hose must have an internal diameter of at least 13 mm (1/2 in.) and must be reinforced. The water supply must be at least equal to the washer delivery capacity.
NOTE : The machine is not suitable for connection to the potable water main.
Attach garden hose to water supply (Fig. 8).
Make sure the ON/OFF switch (pressure select dial) is pushed to the STOP (0) position before plugging the unit into the power outlet (Fig. 9).
Check that the electrical supply voltage and frequency (Volt/Hz) correspond to those specified on the pressure washer rating plate. If the power supply is correct, you may now plug the pressure washer into the power outlet (Fig. 10).
NOTE : The GFCI may need to be reset when first plugged into the electric outlet. Press the “Reset” button until the power light indicator on the GFCI illuminates.

Operation

This pressure washer is equipped with a micro-switch sensitive to water flow. This Total Stop System (TSS) senses water flow in the pump. When the trigger is released, water stops flowing through the pump. The TSS then automatically turns the motor off to protect the pump from overheating, thus saving energy and prolonging pump life

Turn the water supply tap on completely.
Make sure the safety lock is down and in its original position (Fig. 11), then press the trigger for a few seconds until water flow is steady. This will allow air to escape and discharge any residual pressure in the hose.
Turn the ON/OFF switch (pressure select dial) to the LOW (I) or HIGH (II) position to start the pressure washer (Fig. 12).

Using the Nozzles
Before beginning any cleaning task, determine the best nozzle for the job. Each of the nozzles has a different spray pattern. The nozzle patterns are 40˚ (for gentle cleaning), 25˚ (for
all-purpose cleaning), 15˚ (for tough jobs), 0˚ (for spot cleaning or hard-to- reach areas), the Soap nozzle (for detergent application), and the turbo nozzle. The turbo nozzle is a zero-degree rotary nozzle that spins the spray in a circle so it has a wider cleaning swath. The jet must not be directed at persons, pets, live electrical equipment, or the appliance itself.
This electric pressure washer is equipped with five (5) Quick-Connect nozzles and a turbo nozzle that easily snap onto the Quick-Connect collar of the spray wand.
To connect a nozzle to the spray wand:

Turn off the pressure washer and shut off the water supply. Pull the trigger to release water pressure.
Engage the safety lock on the trigger handle by pushing up on the safety lock until it clicks into the slot (Fig. 13).
Snap the desired nozzle onto the Quick-Connect collar until it clicks into place (Fig. 14). To disconnect a nozzle from the spray wand once the cleaning job is complete:
Turn off the pressure washer and shut off the water supply. Pull the trigger to release water pressure.
Engage the safety lock on the trigger handle by pushing up on the safety lock until it clicks into the slot (Fig. 13).
Remove the nozzle by placing your hand over the nozzle while pulling back on the Quick-Connect collar.

Working with Detergents
When cleaning with the pressure washer, some cleaning tasks can be solved with water alone, but for most tasks cleaning with detergent allows for more effective dirt removal. se only detergents specifically designed for use with pressure washers, such as Sun Joe® HOUSE + DECK WASH (SPX-HDC1G), Sun Joe® SNOW FOAM AUTO WASH (SPX-FCS1G), or Sun Joe® HEAVY DUTY CLEANER (SPX-APC1G). DO NOT USE household detergents, acids, alkaline solutions, bleaches, solvents, flammable material, or industrial grade solutions. These could damage the pressure washer. Many detergents may require mixing prior to use. Prepare the cleaning solution as instructed on the solution bottle.

Remove the cap from the detergent tank and fill the tank with detergent (Fig. 15).
Install the soap nozzle (black) on the spray wand (Fig. 14).
Turn on the pressure washer. Pull the trigger to operate the unit. The liquid detergent will automatically mix with water and be discharged through the nozzle.
Turn the detergent dial to adjust the suction volume of the detergent solution (Fig. 16).
Apply detergent from the bottom to the top of the dry surface to be cleaned. NOTE : Wetting the surface first is not recommended as it dilutes the detergent and reduces its cleaning ability.
Allow the detergent to remain on the surface for a short time before rinsing. Do not allow the detergent to dry on the surface.
When finished using the pressure washer, you must first drain and rinse the detergent tanks. Run the pressure washer in low pressure until all of the soap is drained from the detergent tanks.

Rinsing with the Pressure Washer

Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
Engage the safety lock on the trigger handle by pushing up on the safety lock until it clicks into the slot (Fig. 13).
Remove the nozzle by placing your hand over the nozzle while pulling back on the quick-connect collar.
Select the right nozzle for the job (Fig. 17):
The 0º intense-jet nozzle (orange) is an extremely powerful nozzle that delivers a high-pressure, pencil-point jet stream. It is used to cut heavy dirt deposits in a small, concentrated area. It is ideal for dissolving stubborn substances, like tar and grease spots on concrete, or for removing caked mud from equipment. Use this nozzle to clean hard-to-reach areas including the facades of 2-story buildings or the undersides of lawn mowers and tractors. NOTE : Care should be used when choosing the bright nozzle to avoid permanently gouging wood or damaging fragile surfaces.
Use the 15º fan-tip nozzle (yellow) for intense cleaning jobs on hard surfaces. Applications include stripping paint, removing oil stains, grease, heavy mildew stains, and rust from steel. This nozzle should only be used in areas that can withstand the high-pressure from this nozzle.
Use the 25º fan-tip nozzle (green) to clean home siding, brick patios, wood decks, driveways, or sidewalks. When using this nozzle, test a small area first to avoid surface damage.
Use the 40º wide-spray tip nozzle (gray) to clean items such as cars, trucks, boats, patio furniture, or lawn equipment.
Use the Soap nozzle (black) for low-pressure detergent application to clean equipment, remove mildew and oxidation stains from houses, clean bricks or degrease grimy surfaces.
NOTE : When using detergent, make sure to install the correct Soap nozzle (black). All of the other colored nozzles will not work for detergent application.
The rotary turbo nozzle automatically spins a zero degree spray in a circle at high speed. The spinning water jet hits the surface area from multiple angles, quickly breaking down caked-on dirt and grime. The turbo nozzle can cut cleaning time by up to 40%.
Start at the top of the area to be rinsed and work your way down, making sure to overlap your strokes.

IMPORTANT

Bleach, chlorine products, and other corrosive chemicals
Liquids containing solvents (e.g. paint thinners, gasoline, oils)
Tri-sodium phosphate products
Ammonia products
Acid-based products.

Shutting Down

Turn the switch to the STOP (0) position and unplug the power cord from the outlet.
Turn off the water source.
Hold the trigger to release water pressure.
Disconnect the garden hose from the water inlet on the unit.
Disconnect the high-pressure hose connection on the trigger gun handle.
Release the trigger and engage the gun safety lock.

Taking a Break
if you are taking a break of five minutes or more between cleaning tasks

Engage the gun safety lock (Fig. 13).
Turn the switch to the STOP (0) position.
Unplug the power cord from the outlet.

Storage

Hose reel

Unlock the hose reel by pulling out on the handle out
Turn the handle counterclockwise to wind the hose
Wind the hose until you reach the hose’s end.
Push the handle in to lock the reel.

CAUTION!
Always store your pressure washer in a location where the temperature will not fall below 32ºF (0ºC). The pump in this machine is susceptible to permanent damage if it freezes. FREEZE DAMAGE IS NOT COVERED BY THE WARRANTY.

Store the pressure washer indoors in a dry, covered area where it is not subject to adverse weather conditions.
It is important to store this product in frost-free area.
Always empty water from all hoses, the pump, and the detergent tank before storing.

Winterizing + Long-Term Storage

if you must store your pressure washer in a location where the temperature falls below 32ºF (0ºC), you can minimize the chance of damage to your machine by utilizing the following procedure:

Disconnect all water connections.
Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately.
Do not allow the high-pressure hose to become kinked.
Store the machine and accessories in a room that does not reach freezing temperatures.
Do not store near a furnace or other sources of heat that may dry out the pump seals.
Operate the pressure washer with non-corrosive/non-toxic anti-freeze, a pump saver, or a pump protector before storing for the winter.

Maintenance

To ensure good performance, check and clean the water inlet filter (Fig. 20). Remove the pre-filter and water inlet filter and rinse with warm water to prevent any foreign matter from clogging the pump (Figs. 21 – 22).
Clean the nozzle with the needle clean-out tool provided (Fig. 23). Remove the spray wand from the gun; remove any dirt from the nozzle hole and rinse.
Remove additional debris by back flushing water through the nozzle and spray wand. To do this, place the end of your garden hose (with water running) to the tip of the nozzle, pushing water and debris out of the back opening of the nozzle and spray wand.

Disposal Recycling the Washer

Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities.
Contact your local government agency for information regarding the collection systems available.
If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least free of charge.

Service + Support

If your Sun Joe® SPX4001-PRO-RM electric pressure washer requires service or maintenance, please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE
(1-866-766-9563).

Model + Serial Numbers

When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. Copy these numbers into the space provided below.

Troubleshooting

Disconnect the unit from the electrical power supply before carrying out maintenance on the machine or when checking that its parts are in proper working order.
- To avoid unnecessary hassles, consult the following table before contacting customer service with any mechanical issues.
  Problems| Possible Cause| Possible Solution
  ---|---|---
  Machine refuses to start| • Power failure/machine not plugged into a working receptacle.

• Defective socket.

• Fuse has blown.

• Defective extension cord.

| • Check to make sure machine is plugged into a working outlet.

• Check the power cord and reset the GFCI. Try a different outlet.

• Replace fuse. Switch off any other machines that are using the same circuit.

• Try the unit without an extension cord.

Fluctuating pressure| • Pump sucking air.

• Valves dirty, worn out, or stuck.

• Pump seals worn out.

| • Check the hoses and connections are airtight.

• Clean or replace valves/seals.

• Please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance.

Machine stops| • Fuse has blown.

• Incorrect mains voltage.

• Thermal sensor activated.

• Nozzle partially blocked.

| • Replace fuse. Switch off other machines using the same circuit.

• Check that the mains voltage corresponds to specification on the model tag.

• Leave the washer for 5 minutes to cool down.

• Clean the nozzle.

Fuse blows| • Fuse too small.| • Install a fuse with a higher amp rating than the amp consumption of the machine. Try the unit without an extension cord.
Machine pulsating| • Air in inlet hose.

• Inadequate supply of mains water.

• Nozzle partially blocked.

• Water filter blocked.

• Hose kinked.

| • Allow machine to run by holding the trigger until regular working pressure resumes.

• Check that the water supply corresponds to the specifications required.

• WARNING! Avoid using long, thin hoses (minimum 1/2 in. diameter).

• Clean the nozzle.

• Clean the water inlet filter.

• Straighten out the hose to remove any kinks/blockages.

Machine often starts and stops by itself| • Pump/spray gun is leaking.

• Trigger mechanism is broken.

| • Please call Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance.
Machine starts, but no water comes out| • Pump/hoses or accessories frozen.

• No water supply.

• Water inlet filter blocked.

• Nozzle blocked.

| • Wait for pump/hoses or accessories to thaw.

• Connect inlet water.

• Clean the water inlet filter.

• Clean the nozzle.

Optional Accessories

ALWAYS use only authorized Snow Joe® + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this electric pressure washer. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your pressure washer. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

Accessories	Item	Model
1

Sun Joe® House + Deck All-Purpose Pressure Washer Rated Concentrated Cleaner

Sun Joe® Premium Snow Foam Pressure Washer Rated Car Wash Soap + Cleaner

Sun Joe® All-Purpose Heavy Duty Pressure Washer Rated Cleaner + Degreaser

|

SPX-HDC1G

SPX-FCS1G

SPX-APC1G

2|

25-Foot Medium-duty Extension Hose for SPX Pressure Washer Series

|

SPX-25H

3|

Solid Brass Universal Quick Connector (Garden Hose to Pressure Washer Adapter)

|

SPX-UQC

NOTE : Accessories are subject to change without any obligation on the part of Snow Joe® + Sun Joe® to provide notice of such changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe®

Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).

GENERAL CONDITIONS
Snow Joe® + Sun Joe® operating under Snow Joe®, LLC warrants this refurbished product to the original purchaser for 90 days against defects in material or workmanship when used for normal residential purposes. If a replacement part or product is needed, it will be sent free of charge to the original purchaser except as noted below. The duration of this warranty applies only if the product is put to personal use around the household. It is the owner’s responsibility to correctly perform all maintenance and minor adjustments explained in the owner’s manual.
HOW TO OBTAIN YOUR REPLACEMENT PART OR PRODUCT
To obtain a replacement part or product, please visit snowjoe.com/help or email us at help@snowjoe.com for instructions. Please be sure to register your unit beforehand to speed up this process. Certain products may require a serial number, typically found on the decal affixed to the housing or guard of your product. All products require a valid proof of purchase.

EXCLUSIONS

Wearing parts like belts, augers, chains and tines are not covered under this warranty. Wearing parts can be purchased at snowjoe.com or by calling 1-866-SNOWJOE (1-866-766-9563).
Batteries are covered in full for 90-days from the date of purchase. Snow Joe® + Sun Joe® may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating Snow Joe® + Sun Joe® to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective. This warranty is intended to cover product defects only. Snow Joe®, LLC is not liable for indirect, incidental or consequential damages in connection with the use or misuse of the Snow Joe® + Sun Joe® products covered by this warranty. This warranty does not cover any cost or expense incurred by the purchaser in providing substitute equipment or service during reasonable periods of malfunction or non-use of this product while waiting for a replacement part or unit under this warranty. Some states do not allow exclusions of incidental or consequential damages so the above exclusions may not apply in all states. This warranty may give you specific legal rights in your state.

HOW TO REACH US
We’re here to help Monday through Friday from 9AM to 7PM EST and Saturday and Sunday 9AM to 4PM. You can reach us at 1-866-SNOWJOE (1 866-766-9563), online at snowjoe/com, via email at help@snowjoe.com or tweet us @snowjoe.

EXPORTS
Customers who have purchased Snow Joe® + Sun Joe® products exported from the United States and Canada should contact their Snow Joe® + Sun Joe® distributor (dealer) to obtain information applicable to your country, province or state. If for any reason, you are not satisfied with the distributor’s service, or if you have difficulty obtaining warranty information, contact your Snow Joe® + Sun Joe® seller. If in the event your efforts are unsatisfactory, please reach out to us directly.