tern Shortbed Heavy Duty Rear Cargo Tray User Guide
- October 30, 2023
- tern
Table of Contents
tern Shortbed Heavy Duty Rear Cargo Tray
What’s Included
- Shortbed Tray
- Shortbed Plate
- M6 x 30 mm Bolt x 4
- M6 Washer x 8
- M6 Nut x 4
- Plastic Washer x 4
- Rubber Pad x 16
- SideStrap x 2
Weight Limit
Do not exceed 35 kg (77 lb).
Safety
Do not use the Shortbed Tray to move your bike.
Place loads evenly and as central on the Tray as possible.
Secure all cargo before riding. Take care that all straps are tied down and
any loose item is secured.
Installation
Tools required (not included)
10 mm Wrench
4 mm Allen Wrench
Affix Rubber Pads
Clean metal surface with rubbing alcohol to remove dirt and oil. Peel off back of sticker and affix to the locations shown in the diagram below.
Assembly sequence
To mount parallel on the GSD
To mount perpendicular to the GSD, HSD, Quick Haul or Short Haul
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1)
YEAR Limited Warranty from the date of retail purchase by the original end-
user. If a material or workmanship defect arises and a valid claim is received
within the
Warranty Period, this Product will be replaced. Mobility Holdings cannot be
held liable for damages to personal property due to misuse or improper care
and maintenance. This Product Warranty does not, under any circumstance, cover
the replacement or cost of any third party product used with or connected to
the Product.
Tern, the Tern Werd (logotype), the Tern Berd (device), GSD, HSD, Quick Haul,
Short Haul, and Shortbed Tray used alone or in combination are trade names,
trade devices or registered trademarks of Mobility Holdings, Ltd.
© 2023. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.