tern NBD S5i Electric Bike

tern NBD S5i Electric Bike

Bike Parts

1. Andros Stem
2. Light
3. Operating Unit and Display
4. Gear Shifter
5. Physis Handlepost
6. Combo Mount
7. RideEasy Suspension Seatpost
8. Battery
9. Chain Guard
10. Motor Drive
11. Frame and Battery Lock
12. Gaia Rack (rear rack)
13. Kickstand
14. Vertical Parking Contact Points

Press the light button on the Intuvia Display G.

Power On

• Slide the light bulb Icon to the ON position.
• For more detailed information about your NBD
• Watch the owner briefing

Power On
Press C to power on the Drive system

Gear Shifter
Change the gears by using the twister, with the gear number appearing in the indicator @. The lower the number, the lighter pedaling. The higher the number, the heavier the pedaling.

Congratulations on the purchase of your NBD, an ultra-low-step urban e-bike. The following Guide will help you get started with your NBD while highlighting some of its key features. To get an even better understanding of how to take full advantage of your NBD, and for recommendations for safe and happy riding, make sure to visit www.ternbicycles.com/support

Intended Use

• The NBD is designed for individual personal use: riding with both wheels in contact with paved roads only. This Tern bike is not intended for racing, jumps, hops, wheelies, or similar activities that may cause damage to the bicycle and risk injury or death to the rider. re-intro
• The warranty will be void if your NBD is not used in accordance with the intended usage.
• The warranty is enclosed separately from your NBD.
• It our bU was not purchased locally from a learn authorized source, it may not have the correct drive assistance settings and may not be used on public roads.
• Only child seats that conform to EN 14344 can be used with the NBD. To see which child seats and attachment methods have been tested and approved, please refer to the Tern website. If your child seat has not been tested by Tern, check with the child seat manufacturer for information concerning compatibility and proper installation.

Weight and Loading

To safely operate the NBD, you must observe the following:

• The maximum gross vehicle weight of your NBD should not exceed 140 kg (309 lb). The gross vehicle weight is defined as the total weight of the bike, batteries, passengers), accessories, and cargo.
• Maximum rider weight should not exceed 120 kg (265 lb).
• The weight of the NBD without a battery is 20.7 kg (45.5 lb), depending on Your moco
• Maximum weight on the kickstand, when lowered, is 25 kg (55 lb) of cargo
• The maximum weight on the top of the Rear Rack is 27 kg (59.4 lb).
• If the capacity stated above differs from your NBD’s CE Frame Sticker, follow the CE Frame Sticker.
• The maximum limit for the Combo Mount is 20 kg (44 lb). For accessories, please consult the manual included with each accessory.

First Ride

1. Read all the instruction manuals of the components that are supplied with your NBD. If anything is unclear, ask your dealer before riding off.

2. Check the tire pressure and make sure it is within the minimum and maximum values indicated on the sidewalls of the tires.

3. Adjust the saddle height to the preferred position. Make sure the latch is secured tightly.

4. Adjust the Andros Stem to the preferred position.

5. Press G to power on the Operating Unit.

6. Select the level of assistance

   • Press “+ “(b) to increase.
   • Press “-“© to decrease.
   • The selected mode is shown at@.

7. The following assistance levels are available:

   • OFF: The motor assistance is switched off. The e-bike can be operated as a normal bicycle through pedaling.
   • ECO: Effective assistance at maximum efficiency for maximum cruising range.
   • TOUR: Uniform assistance, for touring with a long cruising range.
   • SPORT: Powerful assistance for sporty road-riding, as well as for urban traffic.
   • TURBO: Maximum assistance, supporting the highest speed for sporty riding.

8. The walk assistance aids you when pushing your NBD. The speed of this function depends on the selected gear and can reach a maximum of 6 km/h (3.7 mph). To activate the walk assistance, briefly press the WALK© button on your Operating Unit. After activation, press the “+ “6 buttons within 3 seconds and keep it pressed. The e-bike drive is switched on
   Note : The walk assistance cannot be activated at assistance level OFF.

9. The walk assistance is switched off as soon as one of the following occurs: You release the ‘+ ” 6 buttons;

   • The wheels of the NBD are locked (e.g. by applying the brakes or hitting an obstacle;
   • The speed exceeds 6 km/h (3.7 mph).

10. Use gears as you would on a conventional bicycle to maintain an efficient cadence for your riding style. This will maximize the efficiency of the assistance to your power input and prevent premature wear on the drive system.

11.  Note the drive assistance is limited to:

    • 25 km/h in countries that follow the EU standard
    • 32 km/h (20 mph) for Class 1 in countries that follow the USA standard
    • Practice handling the bike in a safe area before riding on public roads.

LIGHTING

The front and rear lights can be switched on and off at the same time via the onboard computer using the bike light button©. You may be required to turn on the lights at all times, including daytime riding. Please check your local regulations. The front light beam angle must be adjusted downwards as not to blind oncoming traffic.

Frame and Battery Lock

The key code is written on a card that was originally supplied with the lock and on the key itself. Please record the key number and/or store the key code in a secure location ir case you need to order a replacement from the lock manufacturer. You will not be able to recover your keys if this information is missing. Registering your lock with Abus also helps provide better replacement service. case you are unable to retrieve your key and key code. you may take your NBD to the local Bosch dealer to retrieve the key code from the Bosch controller.
Note this information may not always be possible or available.

Suspension Seatpost (NBD S5i)

The Ride Easy Suspension Seatpost can be adjusted by using a suitable tool (Allen key 2.5 mm). Twist toward (+) for a stiffer ride or more ride weight, and (-) for a softer ride or less ride weight.

Vertical Parking

1. Apply the rear brake.
2. Pull up on the handlebar and walk backward.
3. Make sure all support points touch the ground evenly.

in public areas, hold the bike to prevent it from accidentally falling over. Before leaving a vertically parked bike unattended, first strap the bike to a fixed object to prevent it from falling.

Flat Folding

The Tern NBD can be flat-folded to reduce its size. To do so, follow these steps:

© 2022. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>