tern 3 Bicycles Mini Clubhouse Gen Instruction Manual
- June 1, 2024
- tern
Table of Contents
tern 3 Bicycles Mini Clubhouse Gen
What’s Included
- Clubhouse Mini
- M6 x 20 Bolt x 6
- M6 x 16 mm Washer x 6
- M6 x 12 mm Washer x 6
- M6 Nut x 6
How to Install the Clubhouse Mini
Tools Required (Not Included)
- 4 mm Allen Wrench
- 10 mm Wrench
Add anti-seize lubricant to the tip of the bolts before securing the nuts. If anti-seize lubricant is not available, apply any standard lubricant to reduce friction and prevent thread galling.
Transporting One Child
Please review the Carrying Rear Passenger section to learn how to safely carry children on the back of the bike. Any additional passenger seating accessories are available for purchase from your local Tern dealer.
Installing a Bottle Cage or Lock
Carrying Cargo
The Clubhouse Mini fits a single 400 x 400 mm box that is at least 240 mm in height.
Warning
- The Clubhouse Mini is not intended to provide protection in the event of an accident or if the bike falls over. It is solely intended to keep passengers or cargo centered while riding.
Carrying Rear Passengers
Before carrying passengers, it’s important to familiarize yourself with your bike’s capabilities by referring to its user manual and/or QuickStart Guide.
Safety Notes
Check Local Regulations
It may be illegal to carry passengers on a bike in your area even if it has
been designed or configured to do so. Check your local regulations before
carrying passengers.
Know Your Riding Condition
Both front and rear tires must always remain in contact with the ground when
riding with passengers. No passenger is allowed when riding on unimproved or
unmaintained trails with a natural surface, even if your bike is designed to
handle such terrain.
Follow Installation Procedures
Check to ensure accessories have been correctly installed and securely
fastened before riding.
Follow Your Bike’s Max Gross Vehicle Weight Limits
Check your bike’s user manual and/or QuickStart Guide for information about
maximum gross vehicle weight* and/or cargo weight** limits. Please do not
exceed these weight limits.
- Maximum gross vehicle weight is the total weight of the bike, riders (the cyclist and any passengers), accessories, and cargo.
- Cargo weight is the total weight of passengers, accessories, and cargo.
Riding with Passengers
Wear a Helmet
Rider and rear passenger(s) are strongly advised to wear an approved helmet.
- Do NOT Leave Children Unattended
- Do not allow your children to climb onto the bike nor leave your children unattended on the bike, even if it is on the kickstand. Wriggling children can upset the balance of the bike and a fall may result in serious injuries.
Use Proper Equipment
The bike must have the following accessories installed in order to safely
transport rear passenger(s):
- Seating. Purpose-built rear seating, chosen according to the passenger’s needs
- Handhold. Something for the passenger to hold on to, other than the bike itself
- Foot support. Fixed platforms or dedicated foot rests on both sides of the bike
- Foot and leg protection. Something to prevent feet and legs from getting caught in the spinning wheel
- Double kickstand (optional). Dual-leg kickstand with a wide stance that keeps a bike standing firmly on the ground, providing extra stability when loading and unloading a young passenger.
The illustrations above show a mix of suggested gear to safely carry passengers. Your combination of passenger accessories may differ depending on your needs. To learn more about how to safely carry passengers on your bike, visit ternbicycles.com/support.
Use Accessories Properly
If you’re carrying young children on your bike, please follow the instructions provided by your child seat manufacturer for compatibility, proper installation, and recommended use to ensure your child’s safety and comfort. Our seating accessories are strictly for sitting. Using them for other purposes such as lifting the bike may cause damage to the frame and/or said accessories. Our rear handhold accessories are intended for passengers to hold onto. Select rear rack-mounted handholds may be used to briefly lift the bike over small obstacles, but in general please refrain from adding substantial weight on the top of or using the rear passenger handholds to lift the bike, as this will cause undue stress which may damage the bike. Our foot support accessories are strictly for passenger use when SEATED. Standing on them is unsafe and may permanently damage the frame.
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the original end- user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced. Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product. Tern, the Tern Werd (logotype), the Tern Berd (device), and Clubhouse Mini used alone or in combination are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd © 2024. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved. ternbicycles.com
Documents / Resources
| tern
3 Bicycles Mini Clubhouse
Gen
[pdf] Instruction Manual
3 Bicycles Mini Clubhouse Gen, Bicycles Mini Clubhouse Gen, Mini Clubhouse
Gen, Clubhouse Gen, Gen
---|---