AVerMedia AVerVision330 Document Camera User Manual
- June 13, 2024
- AVerMedia
Table of Contents
AVerVision330 Document Camera
Product Information: The product in question is a document camera
called AVerVision330. It is equipped with various features and
components, including a circular vial, camera head, mechanical arm,
LED lamp, anti-glare sheet, RGB video output OSD display, TV output
OSD display, and more. The package contents include a user manual,
driver CD, carrying case, mini Din-9pin to S-Video/Composite/RS-232
adapter, LED lamp, remote control (with batteries), power adapter,
RCA cable, S-Video cable, power cord (varies by country), DVI-RGB
cable, DVI/VGA adapter, and USB cable. Optional accessories for the
product include a light box, RCA to SCART cable (for SCART TV),
monitor adapter (for MAC), computer adapter (for MAC), microscope
adapter (28mm), and microscope adapter (34mm). The key components
of the AVerVision330 document camera are as follows: 1. Circular
Vial 2. Camera Lens 3. Extendable Arm 4. Side Panel 5. Control
Panel 6. LED 7. IR Remote Sensor 8. Back Panel 9. Power 10.
TV/RS-232 Port 11. USB 1.1 Port 12. SD Card Slot 13. CF Card Slot
14. DIP switch 15. DC 6V (output) 16. Security Slot 17. DC 12V
(input) 18. PC IN Port 19. DVI/VGA OUT Port Technical
Specifications: – Image: – Pick-up Device: 1/3 progress scan CCD –
Effective Pixels: 790K – Frame Rate: 15 fps – White Balance:
Auto/Manual (RGB Output only) – Exposure: Auto/Manual/Flicker/Night
View (RGB Output only) – Image Mode: N/A (not specified in the
provided text) – Effect: N/A (not specified in the provided text) –
Analog RGB Output: – H Sync. Signal: N/A (not specified in the
provided text) – V Sync. Signal: N/A (not specified in the provided
text) – Image Signal Level: N/A (not specified in the provided
text) – S-Video, Composite Video Output: N/A (not specified in the
provided text) Product Usage Instructions: 1. Adjusting the
AVerVision330: – The AVerVision330 comes with an extendable arm
that allows you to adjust the camera head to your desired position.
Use the mechanical arm to move the camera lens closer or farther
from the object you want to capture. 2. LED Lamp: – The
AVerVision330 is equipped with an LED lamp that provides
illumination for capturing clear images. Ensure that the LED lamp
is turned on for optimal lighting conditions. 3. OSD Display: – The
AVerVision330 has OSD (On-Screen Display) menus for controlling
various settings and functions. The RGB video output OSD display
and TV output OSD display allow you to adjust settings related to
video output. 4. Menu Functions: – Refer to the user manual for
detailed instructions on accessing and using the menu functions of
the AVerVision330. The menu functions allow you to customize
settings such as image mode, white balance, exposure, and other
effects. 5. Timer Function: – The AVerVision330 may have a timer
function that enables you to set a specific time for capturing
images or recording videos. Refer to the user manual for
instructions on how to use this feature. 6. Troubleshooting: – If
you encounter any issues or problems with the AVerVision330, refer
to the troubleshooting section of the user manual. It provides
solutions to common problems and helps you resolve any technical
difficulties you may face. 7. Limited Warranty: – The AVerVision330
comes with a limited warranty. Refer to the user manual for details
regarding the warranty coverage, terms, and conditions. Note: The
provided text does not contain detailed usage instructions for all
the features and functions of the AVerVision330. For comprehensive
usage instructions, please refer to the complete user manual that
is included with the product.
AVerMedia® AVerVision330 User Manual
AVerMedia®
Document Camera
FCC NOTICE
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial, industrial or business environment. This equipment can generate,
use and radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
· Reorient or relocate the receiving antenna. · Increase the separation
between the equipment and receiver. · Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected. · Consult
the dealer or an experienced radio/TV technician for help. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION ON MODIFICATIONS
To comply with the limits for the Class B digital device, pursuant to Part 15
of the FCC Rules, this device must be installed in computer equipment
certified to comply with the Class B limits. All cables used to connect the
computer and peripherals must be shielded and grounded. Operation with non-
certified computers or non-shielded cables may result in interference to radio
or television reception. Any changes or modifications not expressly approved
by the grantee of this device could void the user’s authority to operate the
equipment.
CE NOTICE
This is a Class B product.
DISCLAIMER
No warranty or representation, either expressed or implied, is made with
respect to the contents of this documentation, its quality, performance,
merchantability, or fitness for a particular purpose. Information presented in
this documentation has been carefully checked for reliability; however, no
responsibility is assumed for inaccuracies. The information contained in this
documentation is subject to change without notice. In no event will AVerMedia
be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use or inability to use this product or documentation, even
if advised of the possibility of such damages.
TRADEMARKS
AVerMedia and AVerVision are registered trademarks of AVerMedia TECHNOLOGIES,
Inc. IBM PC is a registered trademark of International Business Machines
Corporation. Macintosh is a registered trademark of Apple Computer, Inc.
Microsoft is a registered trademark and Windows is a trademark of Microsoft
Corporation. All other products or corporate names mentioned in this
documentation are for identification and explanation purposes only, and may be
trademarks or registered trademarks of their respective owners.
COPYRIGHT
© 2005 by AVerMedia TECHNOLOGIES, Inc. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form by any means without the
written permission of AVerMedia TECHNOLOGIES, Inc.
Table of Contents
Introduction …………………………………………………………………………………. 1 Package Contents
……………………………………………………………………….. 1 AVerMedia® AVerVision330 Components
………………………………………. 3 Technical Specification ………………………………………………………………… 4
Installing and Setting Up the Hardware and Software …………………….. 4
Setting the DIP Switch …………………………………………………………………………………….. 5 Connecting a VGA,
Mac Display Monitor or LCD/DLP Projector ……………………………. 5 Connecting a TV
……………………………………………………………………………………………… 6 Connecting an IBM Compatible PC or
Macintosh Computer …………………………………. 6 Inserting and Ejecting a Memory Card
……………………………………………………………….. 7 Installing JPEG Converter
Applications………………………………………………………………. 7 Converting JPEG File
Formats………………………………………………………………………….. 8 Transferring the Pictures to a
Computer via USB Connection……………………………….. 10 Using AVerVision330 as USB PC
Cam………………………………………………………………. 11 Using the AVerVision Application
………………………………………………………………………. 11 Installing the Software
……………………………………………………………………………………… 11 Application User Interface
………………………………………………………………………………… 13 Installing the LED Lamp
…………………………………………………………………………………… 15 Connecting the Power
Adapter………………………………………………………………………….. 15 Installing the Optional Light Box
……………………………………………………………………….. 16 Connecting to a Microscope
…………………………………………………………………………….. 16
Adjusting the AVerVision330 ……………………………………………………….. 17
Camera Head …………………………………………………………………………………………………. 17 Circular Vial
…………………………………………………………………………………………………… 17 Mechanical Arm
………………………………………………………………………………………………. 17
i
LED Lamp………………………………………………………………………………………………………. 18 Anti-glare
………………………………………………………………………………………………………. 18
Using the Infrared Remote Control………………………………………………… 19 Touch Button Control
Panel …………………………………………………………. 20 LED Panel …………………………………………………………………………………… 22
Infrared Sensor ……………………………………………………………………………. 22 OSD Navigation Tree
…………………………………………………………………… 23
RGB VIDEO OUTPUT OSD DISPLAY……………………………………………………………….. 23 TV OUTPUT OSD
DISPLAY …………………………………………………………………………….. 24
Menu Functions …………………………………………………………………………… 24
BRIGHTNESS ………………………………………………………………………………………………… 24 CONTRAST
……………………………………………………………………………………………………. 24
TIMER……………………………………………………………………………………………………………. 24 WHITE BALANCE
…………………………………………………………………………………………… 24 EXPOSURE
…………………………………………………………………………………………………… 25 DEFAULT
………………………………………………………………………………………………………. 25 NEXT PAGE
………………………………………………………………………………………………….. 25 PREVIOUS PAGE
………………………………………………………………………………………….. 25
CARD…………………………………………………………………………………………………………….. 26 RESOLUTION
………………………………………………………………………………………………… 26
LANGUAGE……………………………………………………………………………………………………. 26 MODE
…………………………………………………………………………………………………………… 26
EFFECT…………………………………………………………………………………………………………. 26
Timer Function …………………………………………………………………………….. 27 Troubleshooting
………………………………………………………………………….. 28 Limited Warranty
…………………………………………………………………………. 29
ii
Introduction
Thank you for purchasing the AVerMedia® AVerVision330. This document camera
displays any documents, negatives, transparencies and 3D objects onto a TV,
LCD or DLP projector making product demonstration a snap.
The AVerVision330’s advanced features make it a versatile and multifunctional
product. You can think of it as a document camera, USB card reader/writer,
digital camera and USB PC web cam all rolled into a single handy and compact
device. Bundled with it, is a remote control, which has a laser pointer, built
right into it making it easier for you to highlight or point out key areas in
your presentation. All these features make the AVerVision330 an ideal device
for business, academic, medical and the scientific community.
Package Contents
Your AVerMedia® AVerVision330 package contains the following:
AVe r Med i a® AVer V i s i on3 30
User Manual
Doc umen t Came ra
User Manual
AVerMedia® AVerVision330
Driver CD
Carrying Case
Mini Din-9pin to S-Video/ Composite /RS-232 Adapter
LED Lamp
(1) Anti-glare sheet
Remote Control (batteries included)
Power Adapter
RCA Cable S-Video Cable
Power Cord * The power cord will vary depending on the standard power
outlet of the country where it is sold.
DVI-RGB Cable
DVI/VGA Adapter
USB Cable
1
Optional Accessories
Light Box *Required to view slides, transparencies and film or to display
negative film as
positive images.
RCA to SCART Cable (For SCART TV)
Monitor Adapter (for MAC)
Computer Adapter (for MAC)
Microscope Adapter (28mm)
Microscope Adapter (34mm)
2
AVerMedia® AVerVision330 Components
The following illustrations identify the key components of your AVerVision330.
1. Circular Vial 2. Camera Lens 3. Extendable Arm 4. Side Panel 5. Control Panel 6. LED 7. IR Remote Sensor 8. Back Panel 9. Power 10. TV/ RS-232 Port 11. USB 1.1 Port 12. SD Card Slot 13. CF Card Slot 14. DIP switch 15. DC 6V (output) 16. Security Slot 17. DC 12V (input) 18. PC IN Port 19. DVI/VGA OUT Port
Side Panel
Back Panel
3
Technical Specifications
Image
Pick-up Device Effective Pixels Frame Rate White Balance (RGB Output only)
Exposure (RGB output only) Image mode
Effect
Analog RGB output
H Sync. Signal
V Sync. Signal Image Signal Level S-Video, Composite Video Output
1/3″ progress scan CCD 790K 1024 (H) x 768 (V) 15 fps
Auto/Manual
Auto/ Manual/ Flicker / Night View
Text/ Graphics/ Microscope Color/ B/W/ Negative/ Mirror/ Rotate XGA 75 Hz;
SVGA 75 Hz 60K/ 47 KHz, TTL level, Positive Polarity 75Hz, TTL level, Positive
Polarity 0.77 Vpp
NTSC/ PAL
Optics
Lens Shooting Area
Zooming Focusing
F1.8-2.7 Auto 380mm x 285mm (max.); 40mm x 30mm (min.) Optical: 5x, Digital: 8x (Accelerated) Auto/ Manual
Power Source
Consumption
Lighting
Lamp type
Input
VGA Input RS232
Output
VGA Output DVI S-Video Composite Video USB DC 6V Output
Dimension
Operating Folded Weight
Card(s) Supported
Secure Digital (SD) Compact Flash (CF)
100-220V ~ 1.8A, 50-60 Hz 15 Watts (lamp off); 30Watts (Lamp on)
LED lamp
15-Pins D-sub (VGA) 9-Pins D-Sub Female
DVI to 15pin D-sub (VGA) Cable DVI-I Type Female Mini-DIN Jack RCA Jack USB1.1
Mini B Type Power Jack
220mm x 140mm x 500mm 380mm x 170mm x 55mm 2 kg (about 4.4 lb) w/o Light
Module
16~512MB 16~512MB
Installing and Setting Up the Hardware and Software
The ports on the back and side panel of the AVerVision330 enable you to
connect the unit to a computer, graphics display monitor or LCD/ DLP
projector, TV or other device. Illustrated below are the ports that are
located at the back and side panel of the AVerVision330 with their
corresponding labels.
4
Port
1. Security Slot 2. DC 12 V (input) 3. PC IN Port
4. DVI/VGA OUT
5. CF Card Slot 6. SD Card Slot 7. DIP Switch 8. USB1.1 Port 9. DC 6V
(output) 10. TV/RS-232
Description
Use this port to connect a Kensington compatible security lock.
Plug the power adapter into this port.
Use this port to connect the AVerVision330 to the VGA output port of your
computer. This enables you to input your computer video signal and pass it
through to the DVI/VGA out port.
Use this port to connect to a VGA/ Mac monitor, LCD/DLP projector, or high-end
projector with DVI interface for your video camera, PC presentation, or memory
card. (To use DVI-DVI connection, please connect the power cord and turn on
the document camera first before plug in the DVI-DVI cable.)
Insert your CF card with the label facing up.
Insert your SD card with the label facing up.
Allows you to configure the DIP switch.
This port enables you to use AVerVision330 as a card reader/writer.
Plug the light module or the optional light box into this port.
Connect the Mini Din 9-Pin to S-Video/ Composite/ RS-232 Adapter to this port.
The s-video and composite connectors enable you to output your video camera or
preview a picture from a memory card on your TV. Note: The RS-232 adapter
allows you to control the AVerVision330 using a computer through an RS-232
connection. Refer to the RS-232 control instructions on your CD for more
information.
Setting the DIP Switch
The chart below depicts options for setting the DIP switch. You must turn the power off on your unit before changing the DIP switch setting.
SW DIP Switch
1
(TV SYSTEM)
2
(VIDEO OUTPUT)
3
(USB CONTROLLER)
4
(ENGINEERING PORT)
UP
NTSC
RGB
Mass Storage
Default
DOWN
PAL
TV
PC CAM
X
Connecting a VGA, Mac Display Monitor or LCD/DLP Projector
To display a presentation using a DVI/VGA or any graphics display monitor, set
the DIP switch no. 2 to the UP position. If DVIDVI connection is used, please
must connect the power cord first.”
LCD/ DLP P rojector LCD M onito r
DVI-RGB Cable (supplied)
MAC
Mac Monitor
Monitor Adapter (o p ti on a l)
DVI/VGA Adapter
SW
DIP SWITCH
DVI/VGA Adapter
DVI Cable (not supplied)
VGA M onit or
LCD/DLP P rojector wi th DVI I nterf ace
5
Connecting a TV
To display a presentation on TV, set the DIP switch no. 1 to the TV system
that you have (UP for NTSC and DOWN for PAL) and DIP switch no. 2 to the DOWN
position. If you are using a SCART RGB monitor, set the DIP switch no. 1 to
the DOWN position for PAL TV system. (The SCART RGB Cable is provided as an
optional accessory cable with the AVerVision330.)
IN
S-Video Connector
S-Video Cable
(supplied)
SW
SW
PAL TV SYSTEM NTSC TV SYSTEM
RCA Connector RS-232 Connector
Video Cable
(supplied)
RCA to SCART Cable (optional)
Tel e v is i o n
To Computer COM PORT
Note: The RS-232 adapter allows you to control AVerVision330 using a computer
through an RS-232 connection. Refer to the RS-232 control instructions on your
CD for more information.
Connecting an IBM Compatible PC or Macintosh Computer
You can connect the AVerVision330 to an IBM compatible PC, Macintosh, or
notebook (laptop) computer. After physically connecting the unit to your PC,
you can display an image on your computer by pressing the PC button on the
unit’s control panel or remote control.
IBM Compatible PC
OR
Macintosh
Computer Adapter (optional)
VGA Cable (not supplied)
Plug to Display Card
MAC
6
Inserting and Ejecting a Memory Card
Insert the card fully with the label facing up until it reaches the end. To
remove, pull the card out.
SD Card (not supplied)
CF Card (not supplied)
Installing JPEG Converter Applications
Minimum System Requirements
! Pentium®-class processor
! Microsoft® Windows® 98 Second Edition, Windows Millennium Edition, Windows
NT Workstation 4.0 with Service Pack 6, Windows2000 Professional with Service
Pack 2, Windows XP Professional or Home, or Windows XP Tablet PC
! 32 MB of RAM (64 MB recommended) ! 60 MB of available hard-disk space
To install the JPEG Converter Applications:
1. Insert your AVerVision CD into your CD-ROM drive, and click on “JPEG
Converter Applications”.
2. Click “Finish” to complete installation.
7
Converting JPEG File Formats
Use the JPEG Converter application provided to convert your JPEG files to a
format that the AVerVision330 can read. 1. Open the JPEG Converter
application.
2. Click on the Browser button to select the file(s) that you want to
convert. You can choose more than one file at a time. Note: You can only
convert files with a “.jpg” file name extension.
8
3. Use the “Format-changed FileName” field to change the name of your source
file.
4. Press the “Transform” button. When finished, a message indicating that the
process is completed appears.
5. Press “OK” and press “Exit” to close the software.
The JPEG Converter application saves your converted files in the same folder
as your source files. You can then copy the converted files to the “JPEG”
folder on your memory card. Use the AVerVision330 PREVIEW Mode to view your
converted image files.
9
Transferring Pictures to a Computer via USB Connection
To transfer pictures, you must set the DIP switch no. 3 to the UP position to
use the AVerVision330 as a USB card reader/writer.
USB Port
USB Cable
(sup plied )
SW
Laptop
DIP SWITCH
Computer Operating System Windows 2000 SP4 and XP SP1 Windows Me and 98/98SE
Computer
Requirement No driver is required. Plug the AVerVision330 into an available
USB port. A new disk icon appears on your system.
You need to install the driver before connecting the unit to the computer USB
port. Insert the driver CD into your CD-ROM drive. The installation main
screen automatically appears. Click Install. After you complete installing the
driver, you must restart your computer. After you restart the computer, a new
“Removable Disk” appears.
10
Using AVerVision330 as USB PC Cam
To use AVerVision330 as USB PC Cam, set the DIP switch no. 3 DOWN. (For
detailed PC Cam driver installation procedures, see the instruction provided
in the CD and click User Manual.)
SW
DIP SWITC H
USB Cable
(sup plied )
USB Port
Laptop
Computer
Using the AVerVision Application
Use the AVerVision PC Camera applications provided to control the
AVerVision330 to save any captured images or video clips to your PC, or send
them via emails.
Note: When a USB cable is connected between the document camera and the PC,
the document camera features are controlled by the application software
directly instead on the remote control.
Installing the Software Minimum System Requirements
! Pentium®-class processor ! Windows NT Workstation 4.0 with Service Pack 6,
Windows2000 Professional with Service Pack 2 or above, Windows
XP Professional or Home, or Windows XP Tablet PC ! 32 MB of RAM (64 MB
recommended) ! 60 MB of available hard-disk space
11
To install PC Webcam Applications:
1. Insert your Software CD into your CD-ROM drive, and click on “PC Camera
Applications” and follow the instructions.
2. Click “Finish” to complete installation.
3. After the installation, connect the USB cable between the AVervVsion330
and your PC. Open the applications by clicking “VisionAP” icon on your
desktop.
12
Application User Interface
C B A 1 2 3 4
12 13 14 15
18 19
5 6 7 8 9 10 11 12 16 17
20 21 22 23
13
A. Basic Setting
Function
1
Digital Zoom and Pan Control
2
Auto Focus
3
Return to normal view (1X)
4
Optical/Digital zoom-in selection.
5
Brightness adjustment
6
Contrast adjustment
7
Normal view without image rotate or mirror
8
Rotate the image by 180°.
9
Image mirroring
10
Convert the image to Negative
11
Convert the image to Black and White
12
Back to the original image
Description
B. Advance Setting
Function 12 13 14 15 16 17
Description Restore to original factory setting Select between text and graphic image enhancement mode Display the image from AVerVision’s camera or from the PC IN port Freeze image Adjust White Balance Adjust Exposure
C. SnapShot/Video
Function
Description
18
Control the video display by controlling bar
19
Play and control the video display
20
Record the video and save it into PC
21
Capture a single picture and save it into PC
22
Retrieve saved pictures or video clips
23
Setup for the picture snapshot or video recording.
14
Installing the LED Lamp
A portable LED Lamp is provided to ensure adequate lighting. Focus the light
towards the object to balance the distribution or range of luminance for
better image projection.
Stretch the arm and insert the LED lamp.
Snap to hold.
Press to release the latch and open.
Connecting the Power Adapter
You can connect the power adapter to a standard 100V~240V AC power source.
Wall Outlet
Power Cord
Power Adapter
TURN ON PLUG HERE
15
Installing the Optional Light Box
Connecting an optional light box enables you to view x-rays, transparencies
and negative slides.
Light Box (optional)
Light Box (optional)
PLUG IT HERE
TURN ON
Connecting to a Microscope
Connecting the AVerVision330 to a microscope enables you to examine
microscopic objects on a big screen without straining your eyes. To view
microscopic images, you must set the unit to microscope mode, and then adjust
the microscope for a clearer image (refer to p26).
16
Close-Up Lens UNSCR
EW W
Microscope Adapter (option)
SCRE
Connect and tighten all three (3) screws
Mi croscope
Adjusting the AVerVision330
This section describes how your can adjust the AVerVision330 to meet your
needs.
Camera head
You can rotate the camera head 125 degrees from left to right. As you rotate
the camera head, the camera adjusts the focus automatically.
15 degrees
Circular Vial
To ensure proper camera head alignment; adjust the camera head until the air
is inside the circle mark.
Mechanical Arm
The mechanical arm is designed to move from almost any angle. Follow the
illustrated safety procedure to adjust.
195 degrees
Extendable up to 122mm (4.8 in) long
60 degrees
120 degrees
17
LED Lamp
Carefully adjust the light towards the object.
45 degrees 45 degrees
Anti-glare
The anti-glare sheet is a special coated film that helps eliminate the light
reflection when you are displaying very shiny object or glossy surfaces such
as magazines, etc. Simply place the anti-glare sheet on top of the shiny
document to reduce reflected light.
18
Using the Infrared Remote Control
Use the AVerVision330 Remote Control to enhance your presentation, switch between (3) three presentation modes and access additional features. To use the remote control, first insert the batteries (2 size “AAA” batteries are provided) into the battery compartment at the back of the remote. Use the figure and descriptions below to help you use the remote control.
8 & 19 PAGE UP/DOWN
9 NIGHT VIEW
10 FULL SCRN
11 & 16
/ MENU
12 AUTO FOCUS
Function
1 POWER
2 CAMERA MODE
3 PC MODE
Button
4 PREVIEW MODE
5 EFFECTS
6 TIMER
7 Reserve
Description
Turns the unit on/off.
Switches to Camera mode and displays the image from the AVerVision330’s built-
in digital video camera. Switches to PC mode and displays the video signal
from the PC IN port. Switches to Preview mode and displays 16-thumbnail images
from the memory card source. Note: You can only view an AVerVision330
photographed image or other 1024 x 768 resolution image. Note: The JPEG
Converter application bundled your unit converts any JPEG file to a file that
is supported by the AVerVision330. In Camera mode, press to convert and view
the video in either BW, Negative or Color.
Press TIMER button to display, start and hide the on-screen display timer. You
can toggle to display or hide the remaining time when the timer countdown has
started. (Refer to the section, Timer Function, for more details.)
In Camera mode, press to rotate the image by 180°.
Use the PGUP and PGDN to display the previous and next set of 16-thumbnail pictures.
Press to turn on/off Night View. Use Night View when you are presenting in a
low-light condition. In Night View, the image of the object appears as though
under the normal lighting conditions. The AVerVision330 automatically adjusts
the exposure to compensate the adverse condition. The captured image however,
appears in slow motion.
In preview mode, press to display the image in full size and to revert back to
display 16thumbnail pictures.
– Press MENU to call the OSD menu and then use the , , and around the menu
button to make a selection and adjustment. Refer to the section, Menu
Functions, for more details.
– In preview mode, use the , , and to make a selection and then press FULL
SCRN to display the image in full size. You may also use FULL SCRN button to
revert back to display 16-thumbnail pictures.
Automatically adjusts the focus.
19
Function
13 FOCUS
! / ”
Button
14 ZOOM +/ –
15 ZOOM RESET
17 LASER
18 CAPTURE/ FREEZE
20 MIRROR
21 DELETE
Description
Press ! or ” to manually adjust the focus.
In Preview mode, press “+” or “” to digitally zoom in and zoom out the
picture. In Camera mode, press “+” or “” to optically zoom in and zoom out
the image. When the bar at the lower right corner of the screen reaches the
maximum level of magnification about 500%, you can still continue to digitally
zoom in the image up to 800%. Note: The image may appear blurry when optically
zooming the image in and out. After achieving the desired magnification the
camera automatically adjusts the focus and the image will become clear again.
When you digitally zoom, the image appearance will degrade.
Press to return to normal view (1x).
Press LSR to turn on the laser pointer. Caution: Do NOT look directly at the
laser pointer. You should also avoid aiming the laser at any surface that may
reflect the beam back (i.e., a mirror or mirrored surface). In Camera mode,
press to photograph an image. The captured image stays on the screen until you
switch to any of the 3 modes. If there is an available memory card in the
slot, the captured image is automatically stored in the memory card in 1024 x
768 resolution.
In Camera mode, press to flip the image picked up by the camera.
Permanently removes the selected picture in preview mode or the displayed full
sized picture.
Touch Button Control Panel
The touch button control panel located on the top side of AVerVision330
provides quick access to commonly used functions.
20
Function
1 CAMERA MODE
2
PC MODE
3
PREVIEW MODE
Button
4
FOCUS
! / ”
5
AUTO FOCUS
6
CAP/FRZ FULL SCRN
7 & 9 MENU/
8
ZOOM +/ –
Description Switches to Camera mode and displays the image from the
AVerVision330’s built-in digital video camera.
Switches to PC mode and displays the video signal coming from the PC IN port.
Switches to Preview mode and displays 16-thumbnail pictures from the memory
card source. Only displays AVerVision330’s photographed image or 1024 x 768
image resolutions. Note: Use the JPEG Converter application to convert any
JPEG file to a format that is supported by the AVerVision330.
Press ! or ” to manually adjust the focus.
Automatically adjusts the focus.
– In Camera mode, press to photograph an image. The captured image stays on
the screen until you switch to any of the 3 modes. If there is an available
memory card in the slot, the captured image is stored in the memory card
automatically and saved in 1024 x 768 resolution.
– In Preview mode, press to display the selected image in full size.
– Press MENU to call the OSD menu and then use the , , and to make a selection
and adjustment. (Refer to the section, Menu Functions, for more details.)
– In Preview mode, use the , , and to make a selection and then press CAP/FULL
SCRN button.
In Preview mode, press “+” or “” to digitally zoom in and zoom out the
picture. In Camera mode, press “+” or “” to optically zoom in and zoom out
the image. When the bar at the lower right corner of the screen reaches the
maximum level of magnification (about 500%), you can still continue to
digitally zoom in the image up to 800%. Note: The image may appear blurry when
optically zooming the image in and out. After achieving the desired
magnification, the camera adjusts the focus automatically and the image
becomes clear again. When you digitally zoom, the image appearance will
degrade.
21
LED Panel
The chart below indicates the status of the AVerVision330.
Color Green Red
Description The unit is powered on. The unit is in standby mode.
Infrared Sensor
When using the remote control, aim it at the Infrared Sensor, which is located
at the front panel of the AVerVision330.
22
OSD Navigation Tree
RGB VIDEO OUTPUT OSD DISPLAY
BRIGHTNESS
MENU BRIGHTNESS CONTRAST TIMER WHITE BALANCE EXPOSURE DEFAULT NEXT PAGE
MENU PREV. PAGE CARD RESOLUTION LANGUAGE MODE EFFECT
-50 0
50
CONTRAST
-50 0
50
TIMER : MIN.
0
0 120
WHITE BALANCE AUTO MANUAL
EXPOSURE AUTO MANUAL FLICKER NIGHT VIEW
DEFAULT NO YES
CARD TYPE FORMAT
RESOLUTION
1024 X 768 800 X 600 640 X 480
LANGUAGE English Deutsch FRANCAIS Italiano Español PYCCK
MODE TEXT GRAPHICS MICROSCOPE
EFFECT COLOR B/W NEGATIVE MIRROR ROTATE
MANUAL RED BLUE MEASURE
MANUAL
-0 100 100
FLICKER 50 HZ 60 HZ
TYPE SD CARD CF CARD FORMAT NO YES
RED
-0
91 511
BLUE
-0
66 511
23
TV OUTPUT OSD DISPLAY TIMER : MIN.
MENU TIMER WHITE BALANCE EXPOSURE CARD DEFAULT
Menu Functions
0
0 120
WHITE BALANCE AUTO MANUAL
EXPOSURE AUTO MANUAL FLICKER NIGHT VIEW
CARD TYPE FORMAT
DEFAULT NO YES
MANUAL RED BLUE MEASURE
MANUAL
-0 100 100
FLICKER 50 HZ 60 HZ
TYPE SD CARD CF CARD
FORMAT NO YES
RED
-0
91 511
BLUE
-0
66 511
The AVerVision330 provides MENU functions enabling you to fine-tune your screen display, set the timer, select OSD language and more. Press the MENU button to call up and exit from the main menu or sub-menu display. Then use or buttons to select the items in the menu list. Use button to enter sub-menu. To adjust the setting, press or buttons.
Main Menu
Sub-Menu OSD
Description
BRIGHTNESS
Press or buttons to increase or decrease the brightness level and improve the visibility of the image. You can adjust the brightness level up to ±50.
CONTRAST
Press or buttons to emphasize or reduce the difference between light and dark conditions. You can adjust the contrast level up to ±50.
TIMER
WHITE BALANCE
24
Press or buttons to set a time value. You can set the time value up to 120
minutes. (Refer to the section, Timer Function, for more details.)
Use or buttons to select between Auto and Manual. AVerVision330 enables you to
automatically or manually adjust the camera to suit the lighting condition or
color temperature. If you select to manually adjust the white balance, you can
adjust the Red, Blue or use the system to measure the color temperature.
Main Menu
WHITE BALANCE
Sub-Menu OSD
EXPOSURE
DEFAULT NEXT PAGE
Description
To obtain a more accurate color balance, place a sheet of white paper under
the camera. Select MEASURE then press button to calibrate the color
temperature. Wait until a “MEASURE OK” appears at the lower left corner of the
presentation screen.
Use or buttons to select between Auto and Manual. AVerVision330 allows you to
automatically or manually adjust the camera to determine how much light is
required. If you choose to manually adjust the exposure, press or buttons to
adjust the exposure level. If you are presenting in a low-light condition,
Night View would let the image of the object appear as though under the normal
lighting conditions. The AVerVision330 automatically adjusts the exposure to
compensate the adverse condition but the captured image will appear to be in
slow motion.
Use or buttons to select between 50Hz or 60Hz. Some display devices cannot
handle high refresh rates. The image will flicker a couple of times as the
output is switched to another refresh rate.
Use or buttons to select YES to restore to original factory default setting or
NO to exit then press to make the selection.
Press to go to the next menu page.
PREVIOUS PAGE
Press to go to the previous menu page.
25
Main Menu CARD
Sub-Menu OSD
Description
Use or buttons to select the source on where to store or view the image.
RESOLUTION LANGUAGE
Use or to select NO to exit or YES to format and delete all the data in the
memory card then press
Use or buttons to choose from 1024×768, 800×600 or 640×480 display resolution
then press to make the selection.
Use or buttons to select from nine different languages then press to make the
selection.
MODE EFFECT
26
Use or buttons to select between text, graphics and microscope image enhancement mode. In text mode, the AVerVision330 corrects the intensity of the adjacent pixel making it more uniform producing sharper and clearer images. While in graphics mode, the AVerVision330 adjusts the gradient of the adjacent pixel that appears to have a smooth image. Setting it to microscope mode automatically fixes the optical zoom and displays the microscope image more clearly. Use or buttons to display the image captured by the camera into negative, positive (true color), monochrome (black and white) mirrored the image, or rotate the image by 180º.
Timer Function
The AVerVision330 enables you to control the pace of your presentation by displaying the remaining time on the countdown screen. This merely serves as a reminder. When time is up, the presentation screen will not be affected in any way.
To Set the Timer:
1. Press MENU to view on screen function selections.
2. Press or buttons to select TIMER.
3. Press or buttons to set a time value.
You can set the time value up to 120 minutes.
4. After selecting a time value, press the MENU button to go back to the main menu.
To View and Start the Timer Countdown:
1. To display the previously set time value, press the TIMER button once. The AVerVision330 automatically converts your settings to “hours:minutes:seconds” format.
0:00:30
2. To start the countdown, press the TIMER button again.
3. Once the countdown timer starts, you can toggle the countdown screen to display and hide it by pressing the TIMER button.
27
Troubleshooting
This section provides useful tips describing how to solve common problems
while using the AVerVision330.
There is no picture on the presentation screen.
1. Check all the connectors again as illustrated in this manual. 2. Check the
remote control’s on/off switch on your display output device. 3. Verify the
setting of the display output device. 4. If you are using a notebook or
computer, you may have to switch the source to VGA.
I have set up the AVerVision330 and checked all the connections as specified
in the manual, but I can not get a picture on the preferred presentation
screen.
– Once power is connected, switch AVerVision330 “ON” from the unit to display
the picture on the presentation screen.
– The default camera display resolution setting is on 1024×768. If your output
device does not support this resolution you will not be able to see an image
on your display device. Press the MENU and RIGHT or LEFT button to the
increase or decrease the resolution setting.
The picture on the presentation screen is distorted or the image is blurry.
1. Before making any adjustments, reset all picture attributes to the factory
default setting (Refer to
the Menu Functions, for more details).
2. Each display device is slightly different from another. Use the
Positioning and Adjustment Control
of AVerVision330 to adjust the picture.
3. Use the Brightness and Contrast menu functions to reduce the distortion.
There is no computer signal on the presentation screen.
When you turn on the computer, it will auto-detect the type of monitor you
have. During auto-detection, there will not be any display on your
presentation screen. To avoid this problem, connect your computer, and all the
necessary cables to the AVerVision330 first before you power on your computer.
28
Limited Warranty
For a period of time beginning on the date of purchase of the applicable
product and extending as set forth in Section 6 of this Limited Warranty (the
“Warranty Period”), AVerMedia Technologies, Inc. (“AVerMedia”) warrants that
the applicable product (“Product”) substantially conforms to AVerMedia’s
documentation for the product and that its manufacture and components are free
of defects in material and workmanship under normal use. “You” as used in this
agreement means you individually or the business entity on whose behalf you
use or install the product, as applicable. This limited warranty extends only
to You as the original purchaser. Except for the foregoing, the Product is
provided “AS IS.” In no event does AVerMedia warrant that You will be able to
operate the Product without problems or interruptions, or that the Product is
suitable for your purposes. Your exclusive remedy and the entire liability of
AVerMedia under this paragraph shall be, at AVerMedia’s option, the repair or
replacement of the Product with the same or a comparable product. This
warranty does not apply to (a) any Product on which the serial number has been
defaced, modified, or removed, or (b) cartons, cases, batteries, cabinets,
tapes, or accessories used with this product. This warranty does not apply to
any Product that has suffered damage, deterioration or malfunction due to (a)
accident, abuse, misuse, neglect, fire, water, lightning, or other acts of
nature, commercial or industrial use, unauthorized product modification or
failure to follow instructions included with the Product, (b) misapplication
of service by someone other than the manufacturer’s representative, (c) any
shipment damages (such claims must be made with the carrier), or (d) any other
causes that do not relate to a Product defect. The Warranty Period of any
repaired or replaced Product shall be the longer of (a) the original Warranty
Period or (b) thirty (30) days from the date of delivery of the repaired or
replaced product.
Limitations of Warranty
AVerMedia makes no warranties to any third party. You are responsible for all
claims, damages, settlements, expenses, and attorneys’ fees with respect to
claims made against You as a result of Your use or misuse of the Product. This
warranty applies only if the Product is installed, operated, maintained, and
used in accordance with AVerMedia specifications. Specifically, the warranties
do not extend to any failure caused by (i) accident, unusual physical,
electrical, or electromagnetic stress, neglect or misuse, (ii) fluctuations in
electrical power beyond AVerMedia specifications, (iii) use of the Product
with any accessories or options not furnished by AVerMedia or its authorized
agents, or (iv) installation, alteration, or repair of the Product by anyone
other than AVerMedia or its authorized agents.
Disclaimer of Warranty
EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, AVERMEDIA DISCLAIMS ALL OTHER WARRANTIES WITH
RESPECT TO THE PRODUCT, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
INCLUDING WITHOUT LIMITATION, SATISFACTORY QUALITY, COURSE OF DEALING, TRADE
USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS.
Limitation of Liability
IN NO EVENT SHALL AVERMEDIA BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING, BUT NOT
LIMITED TO, LOSS OF PROFITS, DATA, REVENUE, PRODUCTION, OR USE, BUSINESS
INTERRUPTION, OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR
IN CONNECTION WITH THIS LIMITED WARRANTY, OR THE USE OR PERFORMANCE OF ANY
PRODUCT, WHETHER BASED ON CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR ANY OTHER
LEGAL THEORY, EVEN IF AVERMEDIA HAS ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. AVERMEDIA’S TOTAL, AGGREGATE LIABILITY FOR DAMAGES OF ANY NATURE,
REGARDLESS OF FORM OF ACTION, SHALL IN NO EVENT EXCEED THE AMOUNT PAID BY YOU
TO AVERMEDIA FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED.
Governing Law and Your Rights
This warranty gives You specific legal rights; You may also have other rights
granted under state law. These rights vary from state to state.
Warranty Period of AVerMedia Product Purchased:
AVerVision DL, 100, 100 Pro: 1 Year Limited Parts and Labor
AVerVision110: 2 Year Limited Parts and Labor
AVerVision100 series, AVerVision280 & AVerVision300: 3 Year Limited Parts and
Labor
AVerVision330, All other AVerVision300X series & 500 series: 5 Year Limited
Parts and Labor
All other AVerMedia Products: 1 Year Limited Parts and Labor
All AVerVision Accessories: 1 Year Parts and Labor
29
P/N 300AAB49 Made in Taiwan
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>