ONNEX COX98549 Protective Gloves Instruction Manual
- May 15, 2024
- ONNEX
Table of Contents
ONNEX COX98549 Protective Gloves
Specifications
- Manufacturer: Conmetall Meister GmbH
- Product Type: Protective Gloves
- Category: PBM Category I
- Compliance: Regulation (EU) 2016/425
- Available Sizes: 7, 9
| Property | Details |
|---|---|
| Standard | EN ISO 21420:2020 |
| Category | PPE Category I according to Regulation (EU) 2016/425 |
| Shelf Life | Product dependent; not specified due to varying conditions of use |
| Storage | Store at normal room temperature, in a dry, well-ventilated place |
away from direct sunlight and heat
Disposal| Dispose of in household waste. Contaminated gloves should be
disposed of as hazardous waste according to local regulations
Available Sizes| 7, 9
Product Codes| COX938547, COX938549
Manufacturer| Conmetall Meister GmbH
Website| www.conmetallmeister.de
Product Usage Instructions
Cleaning
Depending on the level of dirt, after each use, shake out, brush off, or wipe with a damp cloth. Allow the gloves to dry in a well-ventilated area.
Storage
Store in a dry and well-ventilated place at normal room temperature. Avoid direct sunlight and heat sources.
Shelf Life
The duration of use depends on the wear and intensity of use in different applications. There is no specific time frame provided due to these variations.
Disposal
Dispose of gloves properly in household waste. Contaminated protective gloves posing a danger should be disposed of professionally. Contact the relevant waste disposal authority for guidance.
FAQs
Q: How do I determine the correct size for the gloves?
A: The available sizes are 7 and 9. Please refer to the sizing chart provided by the manufacturer to select the appropriate size based on your hand measurements.
Q: What is the recommended method for disposing of the gloves?
A: Dispose of the gloves in household waste following proper guidelines. For contaminated gloves presenting a risk, seek guidance from waste disposal authorities.
How should the protective gloves be stored?
Protective gloves should be stored at normal room temperature, in a dry, well- ventilated place, away from direct sunlight and heat sources.
What is the shelf life of these protective gloves?
The shelf life is dependent on the wear and tear and intensity of use for the respective applications; therefore, no specific time frame can be provided.
How do I clean the gloves?
Clean the gloves depending on the degree of soiling by shaking out, brushing off, or wiping with a damp cloth.
How are contaminated protective gloves disposed of?
Contaminated gloves should be disposed of as hazardous waste in accordance with local waste disposal regulations.
Where can I find the declaration of conformity?
The declaration of conformity can be found on the Conmetall Meister website at
www.conmetallmeister.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>