BESTWAY 56432 Steel Pro Splash-in-Shade Pool with canopy 244 x 51 cm User Manual

: June 3, 2024
: Bestway

BESTWAY 56432 Steel Pro Splash-in-Shade Pool with canopy 244 x 51 cm

Package Contant

/

|

1.83 m x 51 cm (6′ x 20″)

| 2.44 m x 51 cm (8′ x 20″)
---|---|---

5618T

| 56432
| x6|

x8

****| x6|

x8

|

x6

|

x8

|

x14

| x18

| x6|

x8

|

x1

| x1

| x1|

x1

|

x1

| x1

| x2|

x2

|

x1

| x1

| x6|

x8

|

x6

| x8

| x1|

x1

|

x14

|

x18

Assembly Instructions

IMPORTANT SAFETY INSTRUCTIONS

DANGER

PLEASE READ CAREFULLY

Before constructing and using the pool, all the information in this manual is carefully read, understood and followed. These warnings, instructions and safety guidelines cover some general risks related to recreational activities in the water, but they cannot address all risks and hazards in all cases. Any activity in the water requires caution, common sense and good judgment exercised. This information is retained for future use. About that In addition, depending on the type of pool, the following information may vary.
If no instructions for use are included, visit us at www.bestwaycorp.com / www.bestwayservice.de (DE / A).
A competent adult will be designated to supervise the pool when it is in use.
Barriers, pool covers, alarm systems or similar safety devices are useful aids, but do not replace them constant and competent adult supervision.

Safe use of the pool

ï All users, especially children, are encouraged to learn to swim.
ï Learn first aid (cardiopulmonary resuscitation) and refresh this knowledge regularly. In an emergency, this canmake a life-saving difference.
ï Instruct all pool users, including children, what to do in an emergency.
ï Never jump into shallow water. This can result in serious injury or death.
ï Do not use the pool if you are under the influence of alcohol or drugs that affect your ability to swim safely affect use of the pool.

Safety devices

To prevent children from drowning, it is recommended to secure access to the pool with a protective device. In order to prevent the inlet and outlet valve from being used as a boarding aid for children, it is recommended to set up a barrier (and secure all doors and windows, if applicable) to prevent unauthorized access to the pool.

Safety equipment

It is recommended to keep rescue equipment (e.g. a lifebuoy) near the pool.
A working phone and list of emergency numbers will be kept near the pool.
Remove pool covers completely from the water surface prior to entering the pool when in use.
Pool users are protected from water-borne diseases by constantly treating and treating the water is kept hygienically safe. The water treatment guidelines in the user manual are consulted.
Store chemicals (e.g. products for water treatment, cleaning or disinfection) out of the reach of children.
The characters below are used. The signs are in a conspicuous place within 2m near the installing the pool.

Always supervise children in and around the water. Do not jump.

Removable ladders are to be arranged on a horizontal surface.
Accessible surfaces must be checked regularly to avoid injury, regardless of the requirements for the construction of thematerials used in the pool.
Check bolts and screws at regular intervals and remove any splinters or sharp edges in order to to avoid cut injuries.
Do not leave the pool outdoors when it is empty. By occurring winds there is a risk of the pool slipping as well Deformations of the steel frame.
If you have a filter pump, please read the corresponding instructions for use.
The pump must not be used when people are in the pool!
If you own a safety ladder, please read the relevant instructions for use.
ATTENTION! The use of a pool kit implies that it complies with the safety regulations set out in the operating and maintenance instructions are described. To prevent drowning or other serious injuries, special Attention paid to secure access to the pool as children under the age of 5 unexpectedly find themselves in the pool swimming pool, and when children are bathing, they are supervised at all times by an adult supervisor.

Safety of non-swimmers

Weak swimmers and non-swimmers must be supervised constantly, actively and vigilantly by an expert at all times adult supervisor required (recall that children under 5 years of age are at greatest risk of drowning).
Weak swimmers or non-swimmers should wear personal protective equipment when entering the pool.
When the pool is not in use or supervised, all toys are removed from the pool and its surroundings removed to prevent children from being attracted to it

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

BEFORE CONSTRUCTION

CHECKLIST

Check the contents of the package for completeness using the instructions for use. Make sure the components match yours match the purchased model. If any parts are damaged or missing at the time of purchase, please visit us at www.bestwaycorp.com/support / www.bestwayservice.de (DE / A).

CHOOSE THE RIGHT LOCATION

The surface on which the pool is to be built must meet the following requirements:

Due to the combined weight of water in the user, it is extremely important that the chosen surface is capable of supporting this be able to wear it throughout the bathing season. Influences such as rain or spilling water are also included note, as these can soften the ground.
Regularly check the position of the pool legs and the side U-beams. These must always be at the same level as the pool floor. Should feet and U beams begin to sink into the ground, drain the water immediately to prevent collapse to prevent the pool. Then set it up again somewhere else or reinforce the subsoil.
The surface must be absolutely flat. If there is an unevenness or slope, this can lead to an uneven load on the pool.
This can damage the welding points of the foil and the frame can be bent. In the worst case, this can lead to the collapse of the pools to severe personal injury and/or property damage.
We do not recommend placing the pool near objects that could allow children to climb in.
Locate the pool near an appropriate drainage system to prevent overflow or to drain. Make sure sure that the side of the pool with water inlet A and water outlet B is in the same direction as the power source that the filter system must be connected.
The selected surface must be free of any objects. Due to the weight of the water, any object under the damage the pool floor material.
The selected surface must be free of aggressive plants and weed species. Too much growth could get through the foil eat through and lead to water leakage. Grass or other plants that can lead to odor or slime must be removed
be removed from the selected location.
There must be no overhead lines or trees at the chosen location. Make sure the location is not underground Contains service pipes, lines or cables of any kind.
The selected location must be far enough away from the house entrance. Do not place equipment or furniture around the pool.
Overflowing water could damage them.
The chosen one must not have any holes.
Recommended Surfaces: Grass, soil, concrete and any other surface that meets the above requirements.
Surfaces Not Recommended: Mud, sand, gravel, patio, balcony, driveway, platform, soft/loose ground and all others Substrates that do not meet the above requirements.
Ask your local city council about the legal regulations regarding fences, barriers, lightingand safety requirements and ensure you comply with all laws.
If a pump and/or a safety ladder is included in the set, please read the corresponding instructions for use.
The safety ladder must match the size of the pool.
Should it be necessary to change the position of the pool during assembly, lift the pool liner and do not pull it over the ground. The friction between the PVC and the floor can damage the pool liner.
Follow all of the above instructions to find the right location for your pool. Damages related to the Selection of the wrong location cannot be considered a manufacturing defect.

INSTALLATION

CONSTRUCTION

Follow the installation instructions according to the drawings shown in the instructions for use. These are only for Illustrative and may not reflect actual product. Not to scale.
A steel frame pool can be assembled without the use of tools.
Assembly without filling usually takes about 20 minutes with 2-3 people.
To prolong the life of your pool it is important to dust the top rails with talcum powder prior to assembly (not im included in delivery).
Bestway® assumes no responsibility for damage resulting from improper handling or failure to follow these instructions attributed.
We strongly recommend only assembling the pool when the outside temperature is more than 15ºC; the PVC material of the pool liner is then more flexible and easier to use.

FILLING

Do not leave the pool unattended while it is filling.
Fill the pool with water up to the sweat line. This corresponds to 90% of the maximum water capacity.
Do not overfill the pool as this may cause collapse. In the event of heavy rainfall, we strongly recommend checking the water level be reduced in advance to prevent overflow.
When the pool is completely filled, check whether the distance between the water surface and the top edge of the rods is the same everywhere. If this is not the case, this indicates unevenness in the subsurface.
A water-filled pool on uneven ground can result in a bursting of the spot welds and/or collapse of the pelvis, what can cause severe personal injury and/or property damage.

MAINTENANCE

Failure to follow the maintenance instructions below can pose serious health risks to you and your children.

WATER

It is important to keep your pool water clean and chemically balanced at all times. A simple cleaning of the filter cartridge is sufficient for proper maintenance is not sufficient. We therefore recommend the proper use of pool chemicals in the form of chlorine or Use bromine tablets (not granules) in connection with the chemical dispenser. The chemical tablets are not included contain.
The water quality is directly related to the frequency of use, the number of people and the general maintenance of the pools. If the water is not chemically treated, it should be changed every 3 days. Use to In any case, fill with tap water to avoid the influence of undesirable ingredients, such as e.g. As minerals to minimize.
We recommend that you take a shower before using the pool, as cosmetics, lotions and other residues on the skin can damage the skin can affect water quality.
Regularly remove all debris from the pool.
Place a bucket of water next to your pool to clean users’ feet before entering that pool.
The chemical preparation must be carried out with a ChemConnect™ chemical dosing device or a dosing float. chemicals should never be placed directly in the water as they may settle to the bottom and discolour or damage the material.

Chemical tablets (not included):

The pool kit you purchased may not include a ChemConnect™ chemical dispenser. In this case you can use this below www.bestwaycorp.com / www.bestwaystore.de (DE / A) or from your nearest retailer.
Remove the chemical dispenser when the pool is in use.
Use test strips (not included in the scope of delivery) after using the pool chemicals and before using the pool Check chemical content. The following table serves as a guide.

Parameter	Value
Water Clarity	Clear view of pool bottom
Watercolor	No coloring
Turbidity in FNU/NTU	Max.1,5 (optimal: < 0,5)
Nitrate concentration above fill water value (mg/l)	Max. 20
Amount of organic carbon (TOC) (mg/l)	Max. 4.0
Redox potential against Ag / AgCl 3.5 m KCl in mV	Min. 650
PH value	6.8 – 7.6
Free active chlorine (without cyanuric acid) (mg/l)	0.3 – 1.5
Free chlorine in combination with cyanuric acid (mg/l)	1.0 – 3.0
Cyanuric Acid (mg/L)	Max 100
Combined chlorine (mg/l)	Max. 0.5 (optimal close to 0.0)

Excessive use of chemicals can discolour the material and, in the worst case, damage the pool liner.
Chemicals are potentially toxic and should always be handled with care. Chemical fumes, as well as the wrong labeling like Storage of chemicals can pose serious health risks.
For more information, contact your local dealer. Be sure to follow the chemical manufacturer’s instructions.
The pump is used to circulate the water and to collect small dirt particles. In addition, to keep your pool water clean and
To keep it hygienic, additional chemicals must be added to the water.

CONSTRUCTION AND STORAGE

RELEASE

ï To drain the water, please follow the relevant illustrations in the instructions for use. These are only for
Illustrative and may not reflect actual product. Not to scale.
ï Also find out about the locally applicable regulations on water disposal.

CLEANING

Rinse the pool liner with tap water to completely remove all chemical and dirt residue.
Let the pool dry completely in the sun.
To completely remove the remaining water, wipe the pool liner with a dry cloth.

STORAGE

Remove all accessories and ensure the pool liner and accessories are completely clean and dry prior to storage are. If this is not the case, mold can form and damage the pool liner during storage.
When the pool is completely dry, sprinkle with talcum powder to prevent it from sticking together.
We strongly recommend dismantling the pool when the outside temperature is below 10ºC.
Only fold up the pool liner when the outside temperature is above 10ºC. Store the pool in a dry place a moderate temperature between 10 and 38ºC. Use a cardboard box to store the PVC material during winter time to protect better.

REPAIR

In the event of a leak, repair your pool with the repair patch provided. For more information, see www.bestwaycorp.com/support / www.bestwayservice.de (DE / A).