Tern DuoStand S Dual Kickstand User Guide

October 30, 2023
tern

Tern Duo Stand S Dual Kickstand User Guide
Tern DuoStand S Dual Kickstand

Safety

If you are unsure how to install this product, please visit your local dealer.
Do not exceed the load limit of 45 kg (99 lb). Please remember the max load limit includes the weight of the bike.
Never leave children or pets on a parked bike unattended.
The Lock stand Extensions are not recommended for use with the NBD and Duo Stand S.

What’s Included

  • DuoStand
  • M10 x 70 Bolt x 1
  • M10 Washer x 2
  • M10 Nut x 1
  • M10 Spring Washer x 1
    What’s Included

Installation

Tools required (not included)

  • 17 mm Wrench x 2
  • 5 mm Allen Wrench
  1. Remove the existing kickstand.
    Installation

  2. Install the Bolt Sets in the order and arrangement shown below.
    Add anti-seize lubricant to the tip of the bolts before securing the nuts. If anti-seize lubricant is not available, apply any standard lubricant to reduce friction and prevent thread galling.
    Assembly Order

  3. Nut

  4. Spring washer

  5. Washer

  6. Bike frame

  7. Duo Stand

  8. Washer

  9. M10 x 70 Bolt
    Installation

  10. The recommended clearance from the bottom of the rear wheel to the ground is 10 – 15 mm (3/8” – 5/8”). Measure the distance from the bottom of the rear tire to the ground and adjust the height of the Duo Stand by loosening the bolts on the Duo Stand Ends to raise or lower the legs. Tighten the bolts to a torque of 8 – 9 Nm.
    Installation

LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the original end- user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced. Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.

Tern, the Tern Werd (logotype), the Tern Berd (device), Lockstand, and DuoStand used alone or in combination are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd.

© 2023. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.

@ternbicycles

ternbicycles.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals