AUTOMATE 5V Magnetic Charger User Guide
- June 6, 2024
- AUTOMATE
Table of Contents
AUTOMATE 5V Magnetic Charger
Magnetic Tip
- Rotate the Motor Cap on the 5V motorhead in order to access the charging terminal port on the motor
- Connect the magnetic tip into the Micro USB port of the motor you wish to charge.
- Ensure that the orientation of the magnetic tip is correct and allow the cable connection later on the charging process.
Magnetic Cable
Connect your charger (the one you usually use to charge the motors) to the magnetic cable as the picture shows.
Start Charging
After you have connected the cables into the motor, make sure that the green LED is blinking in order to confirm that the motor will begin to charge. Once the motor has finished the charging process, the green LED will become solid. Leave the magnetic tip connected to the motorhead for future charging. Slowly pull from the charger’s end from the motorhead.
For further information visit automateshades.com or watch the video on https://www.youtube.com/watch?v=XjmUBF8Wqqo
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>