STARLEAD UKM3099 Round Bathroom Mirror with Light 60cm Diameter User Manual
- June 17, 2024
- STARLEAD
Table of Contents
STARLEAD UKM3099 Round Bathroom Mirror with Light 60cm Diameter
Product Information
Specifications
- Size: 60X60cm
- Input Power: 29W
- Ra: >80
- LED: SMD2835/198PCS
- Lumen: 1900LM
- CCT: (Color Correlated Temperature)
Tools Needed for Installation
- Pencil
- Screw Driver
- Rubber Mallet
- Electric Drill
- Tape Measure
Installation Steps
- Measure the distance between the two brackets on the back of the mirror and mark the same distance on the wall using a level.
- Drive plastic anchors into the hole drilled with an electric drill, then screw the screws into the plastic anchors using an electric drill.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it to complete installation.
Instructions for Use
The LED mirror is equipped with 3 touch sensor switches:
- Light Sensor: One click for light on/off, quick clicks for color temperature changing, long press for dimming.
- Demister Pad Sensor: Turn on before shower to prevent fog on the mirror, turn off after use.
- Bluetooth Speaker Sensor: Connect to phone via Bluetooth to play music, turn off when not in use to avoid accidental connections.
Kind Reminder: Bluetooth is connectable to one device only. Forget the first device if connecting a second device.
FAQ
-
Q: Can I install the mirror both vertically and horizontally?
A: Yes, both vertical and horizontal installations are valid. -
Q: How do I change the color temperature of the light?
A: Quick clicks on the light sensor switch allow you to change the color temperature of the light. -
Q: How do I connect my phone to the Bluetooth speaker?
A: Turn on the Bluetooth speaker sensor, search for a signal named “mirror multimedia” on your phone, connect to play music.
Technical information
- Both vertical & horizontal installation are valid.
Kits coming with the mirror
Tools needed for installation
Installation steps
- Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switch , when installation finished and power connected , the touch sensor light will be on, it can be turn off by long press when the light is off.
For LED Ligh t
First touch sensor is for the LED light, one click for light on/off, quick
clicks on-off-on for color temperature changing, long press for dimming.
For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can
turn it on, when we finish the shower, the demister pad area would be clear
without any fog. Turn if off before leaving.
For Bluetooth Speaker
Third touch sensor is for the bluetooth speaker, when the power connected, it
will have a reminder voice means that it is ready for connecting. Open
bluetooth function from the mobile phone, we can find a signal called mirror
multimedia. Click and connect then we can play music from the phone and the
music will come from the speaker’s backside of the mirror. Turn it off when it
is free, avoid the neighbor connect it by accident.
Kind reminder
Bluetooth is connectable to one device on Bluetooth is connectable to one
device onlyy. If you want to connect the second device, please . If you want
to connect the second device, please foget the first device. forget the first
device.
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
- Do not use outdoors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>