Shenzhen Kunpeng Innovation Intelligent Technology YM001 Intelligent Audio Desk Lamp Instructions
- June 6, 2024
- Shenzhen Kunpeng Innovation Intelligent Technology
Table of Contents
WIRELESS CHARGER MUSIC LAMP
PRODUCT INSTRUCTIONS
*The light pole and wireless charger bracket of this product are not movable, please do not pull. Thank you very much for choosing our products, please read the product description carefully before using the product
FEATURES
- Simple and exquisite modeling
- Wireless charger
- Phone stand function
- Wireless speaker.
- Lamp.
- Handsfree
|
---|---
APPEARANCE CHARACTERISTICS
ON/OFF and Dimming
Lampshade
Wireless charger stand
Function button (Phone holder support points )| Speaker cavity
Speaker indicator (blue light)
Type-c interface
Indicator light
---|---
OPERATION METHOD
- Plug the USB port of the USB data cable to the power adapter and the Type-C end to the wireless charger (Note: The power adapter needs to be purchased separately ).
- After the product is powered on, the product indicator red light is on.
- Place the device that needs to be charged in the charging indication area of the product, the red light turns to blue light, the blue light stays on and enters the charging state.
LIGHT TOUCH FUNCTION
-
Touch the first time to start the
-
light 30% brightness.
-
Touch the second time to
-
change the light to 70% brightness.
-
Touch the third time to change
-
the light 100% brightness.
-
Touch the fourth time to turn
-
off the light. Cycle in turn .
-
The light pole and wireless charger bracket of this product are not movable, please do not pull.
TURN ON YOUR SPEAKERS AND USE
In the off state, press the play button for about 3 seconds, there is a beep
and the indicator light is blue to indicate that it has been turned on„
indicating that the speaker is searching for pairing. At this time, turn on
the Bluetooth function of your mobile phone. In the Bluetooth device, search
for Bluetooth, click to select the device name, and it automatically enters
the pairing.
If the product is not paired for 10 minutes, the speaker will automatically
turn off.
BUTTON FUNCTION
Power switch/play/pause/hands-free
Press and hold for 3 seconds to turn on In the playback state, short press to
pause the song, short press again to play the song. Press for 3 seconds to
shut down
Next song/Volume up
In the playback state, a short press in sequence will play the next song. Long
press to increase the volume, and a beep will sound when the volume is
increased to the maximum.
Previous song/Volume down
In the playback state, a short press in sequence will play the previous song.
Long press to decrease the volume.
APPLICABLE DEVICE
Intelligent identification charging device: compatible with major brands,
Mobile phone equipment that meets QI standards.
(phone: iPhone12/12Pro/12Pro Max,iPhonel 1/11 Pro/11 Pro Max iPhone Xs/Xs
Max,iPhone XR,iPhone X,iPhone8/8Plus Samsung: Galaxy S6 Galaxy S7 Galaxy S8
Galaxy S9 Note 8 Noteg HuaWei: Mate RS, Mate 20 Pro/20 RS, Mate30/30 Pro/30
RS, P40Pro
XiaoMi: MI9/9 Pro 5G/10/10 Pro,MIX 2S/3
Note: This product supports wireless charger function, and realizes
short-range wireless energy transmission by magnetic induction. With
overcharge protection.
PRECAUTIONS
- Don’t pull the light pole and wireless charging stand
- Do not use the product in direct sunlight or high temperature for a long time.
- Do not charge too close to magnetic cards, magnetic recording media, and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Keep the product away from water or other liquids.
- If you want to clean the product, disconnect the power.
- Product working environment temperature range 0-45C
WIRELESS CHARGING SPECIFICATIONS
Product size: 210 X 140 X 280mm
Product material: ABS+aluminum alloy+silicone
Power input: 9V =2A 12V —2A
Output power: 10W
Bluetooth version: 5.0
Speaker power: 5W
Bluetooth distance: 10m
material: ABS+aluminum alloy+silicone
Product weight: 487g
The power charging port is an international universal TypeC port.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cmbetween the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.