DYNOJET 2018 Can-Am X3 900 HO Launch Control Module Installation Guide

DYNOJET 2018 Can-Am X3 900 HO Launch Control Module

Product Information

POWER VISION 4

The Power Vision 4 is a device designed for use with Can-Am vehicles. It provides various features and benefits, including customizable gauge screens, data logging screens, troubleshooting of Diagnostic Trouble Codes, and access to state-of-the-art technical support. The device can be paired with your phone and the Dynojet PV4 app to provide a comprehensive view of your vehicle.
The Power Vision 4 is equipped with LEDs that indicate its status. A short blink indicates power, while a long blink indicates a connection to the ECU. The red LED indicates communication on the bus, with solid red indicating communication and rapid flashing indicating recovery mode.
Installation of the Power Vision 4 requires locating the diagnostic connector on your specific Can-Am model. The user manual provides detailed instructions for locating the diagnostic connector for various Can-Am models, including Maverick X3, Trail, Maverick, Spyder, Commander, Defender, Ryker, and Outlander.

Product Usage Instructions

POWER VISION 4

1. Download and install the Dynojet Power Vision app from the Apple App Store or Google Play Store.
2. Ensure that Bluetooth and Location services are enabled on your phone.
3. Connect the Power Vision 4 to the vehicle’s diagnostic port.
4. Turn the ignition switch to the ON position and the run switch to the RUN position (do not start the vehicle).
5. Open the Dynojet Power Vision app on your phone.
6. Log in using your Dynojet account login information. If you don’t have an account, create one by providing your information and a password.
7. Press the Scan button in the app to search for available devices.
8. Select the Dynojet PV4 from the list of available devices.
9. Edit the vehicle name if desired and press Update to save.
10. To flash your vehicle, access the Tunes section in the app.
11. Select a tune file (.djt) from the list of available Dynojet Tunes or use the Filter option to narrow down the list.

Note: The Power Vision 4 comes with one available Tune License. To flash additional vehicles, you will need to purchase additional tune licenses from Dynojet.
For more detailed instructions and technical support, please refer to the user manual or contact pv4tech@dynojet.com.

INTRODUCTION

• Thank you for purchasing the Power Vision 4 (PV4) from Dynojet Research. The Power Vision 4 is the most fl exible and powerful fl ash tuning device in the world. The Power Vision 4 uses refl ash technology to change the parameters inside the stock Engine Control Unit (ECU) that affects the way the engine will run.
• The Power Vision 4 has three indicator lights:
• Red LED— Communication. Solid red is communication on bus; rapid fl ashing is recovery mode.
• Green LED— Power. Short blink is power; long blink is connected to ECU.
• Blue LED— Bluetooth status. On is connected to Bluetooth; off is not connected.
• After the vehicle has been fl ashed, the Power Vision 4 does not need to remain connected to have full benefi ts of the device, however, the Power Vision 4, paired with your phone and the Dynojet PV4 app, provides a window into your vehicle. Gain access to customizable gauge screens, along with data logging screens and troubleshooting of Diagnostic Trouble Codes.
• For state-of-the-art technical support, please email pv4tech@dynojet.com.

LOCATING THE DIAGNOSTIC CONNECTOR

Maverick X3 Models

• The diagnostic connector is located under the glove box lid. Note: Remove the diagnostics port holder and insert the Power Vision cable to hold the cable securely in place.

Trail Models

• The diagnostic connector is located under the dash to the left of the steering column.

Maverick Models

• The diagnostic connector is located near the fuse box. Note: Remove the diagnostics port holder and insert the Power Vision cable to hold the cable securely in place.

Spyder Models

• The diagnostic connector is located under the front hood/luggage compartment area behind the small radiator cap access panel.

Commander Models

• The diagnostic connector is located under the dash on the driver’s side near the battery and fuse box.

Defender Models

• The diagnostic connector is located under the front hood.

Ryker Models

• The diagnostic connector is located under the front cover.

Outlander Models

• The diagnostic connector is located under the seat.

GETTING STARTED

1. Download and install the Dynojet Power Vision app from the Apple App or Google Play Store.
2. Verify Bluetooth and Location are enabled.
   • Location permission is required for the app to access the phone’s Bluetooth hardware.
3. Connect the Power Vision to the vehicle diagnostic port.
4. Turn the ignition switch to the ON position and the run switch to the RUN position, but do not start the vehicle.
5. Open the Dynojet Power Vision app.
6. Log in using your Dynojet account login information.
   • Don’t have a Dynojet account? Press I don’t have an account and create one. Enter your information and a password and press Register.
7. Press Scan.
8. Select the Dynojet PV4.
9. Press the Pencil to edit the vehicle name. Press Update to save.

FLASHING YOUR VEHICLE

Your Power Vision 4 comes with one available Tune License. Before you can fl ash additional vehicles, you will need to purchase additional tune licenses from Dynojet.

1. Press Tunes.
2. Select a tune fi le (.djt) from the list of available Dynojet
   • Tunes or press Filter to fi lter the list of tunes.
3. Tap a Filter fi eld and select from the available options to narrow the results.
4. Once you have selected your fi lters, slide the fi lter screen to the left. Select a tune fi le from the fi ltered list. 5 Press Flash Tune.
5. Press Yes to use the included Tune License to lock the Power Vision 4 to this vehicle and fl ash the tune. Do not turn off the key switch or disconnect the Power Vision during the fl ash.

EDITING TUNES WITH POWER CORE

Use Dynojet’s Power Core software to edit the ECU tables to improve your riding experience. When you are fi nished editing, save the tune to the Cloud and use the Dynojet Power Vision 4 App to fl ash your tune to the vehicle.

1. Open the Dynojet Power Core software.

2. Open C3 Tuning.

3. From the Home ribbon, click Browse Cloud. Log in using your Dynojet account login information.
   Note: If you do not already have an account, you will need to create an account to use the Browse Cloud feature. Click Create Account and follow the on-screen instructions.

4. Using the drop-down arrow, select your vehicle.

5. Select the stock fi le to edit and click Open.

6. Make your desired changes to the table(s).

7. Click Save As>Save to Cloud as.

8. Enter a name for your tune and click Save.

9. Enter any important tune notes and click Save.

10. Return to your phone and refresh the tunes list in the app.

11. Select your modifi ed tune and press Flash Tune.

LICENSE MANAGER

View available tokens, redeem and purchase tokens for tune licenses, and download a license to store on your phone for use off line. Your Power Vision 4 comes with one available Tune License. Tune Licenses are transferable.

1. Press Menu and press License Manager.
2. View your available tokens or press Purchase Tokens to purchase tokens to use for a tune license.
3. Press Download to download and store your tune license on your phone.
4. Press Create License to purchase a license for a vehicle.
5. You will need an available token to create a license. 5 Press Yes to redeem your token for a tune license.

VIEWING LIVE GAUGES

Your Power Vision 4 allows you to confi gure digital and circular gauges for real time monitoring. The Power Vision must be connected to the vehicle to view live gauges.

1. Connect the Power Vision to the vehicle diagnostic port.
2. Start the vehicle.
3. Press Live Gauge.
4. Press + to add a gauge.
5. Add a digital gauge.
   • Press the Channel fi eld to view a list of the available options for that fi eld.
   • Press the Gauge Type fi eld and select digital.
   • Press the Precision fi eld and select the precision.
   • Press the Unit fi eld and select a unit.
6. Once you have completed your selections, press Add Gauge.
7. Press the Pencil to edit or remove the gauge.
8. Add a circular gauge.
   • Press the Channel field to view a list of the available options for that field.
   • Press the Gauge Type field and select circular.
   • Press the Min Value and Max
   • Value and use the number pad to enter your values.
   • Press the Precision field and select the precision.
   • Press the Unit field and select a unit.
9. Once you have completed your selections, press Add Gauge.
10. Press the Pencil to edit or remove the gauge.

LOGGING DATA

The Power Vision 4 allows you to log data and view the log using Power Core Software.

1. Press Datalog.
2. Press Start to begin logging data.
3. Press Lap to save the current log and start a new log.
4. Press Stop to stop logging.
5. Press the Envelope to share your log.

Email the log to your computer and open the log using Power Core. Refer to the Power Core Help.

VIEWING THE DIAGNOSTIC CODES

Diagnostics allows you to read and clear diagnostic trouble codes (DTCs).

1. Press Diagnostic.
2. Press Read DTCs to read codes.
3. Press Clear DTCs to clear the codes.
4. Press the Envelope to share your log.
5. If requested by Dynojet Technical Support, Email the file to pv4tech@dynojet.com.

VIEWING THE DEVICE INFORMATION

• Device Information allows you to view the Power Vision 4 firmware version, serial number, and address, and copy the device information if needed, while Firmware type allows you to toggle between brands of the firmware.
• Note: Changing the firmware type will require you to use the correct diagnostic cable.

1. Press Tunes and press Device Info.
2. Press Copy device information to save a copy of the device information to your clipboard.
3. Press the Firmware type brand name to view a list of the available options.
4. Scroll through the brands and select a brand.
5. Press the X to close and initiate the firmware update.
6. Press Yes to confirm the firmware update.

DISCONNECTING FROM THE POWER VISION 4
Manually disconnect from your Power Vision 4 and connect to another device.
Press Menu and press Device Info and press Forget Power Vision 4.

UPDATING THE APP
Check for updates and update the Dynojet Power Vision app.

1. Press Menu and press Update App.
2. Follow the prompts to continue the update process.

REPORT A PROBLEM
Have questions, a problem, or need additional support?
Email Dynojet’s state-of-the-art technical support team.

1. Press Menu and press Report a Problem.
2. Select which email app to use.

SHARING THE VEHICLE INFORMATION
Share the Power Vision 4 vehicle information for diagnostic purposes.
Press Share and using the share dialog, send your vehicle information for diagnostic purposes.

INSTALLING THE POWER CORE SOFTWARE

Download the Power Core software and take tuning to a whole new level.
Note: Downloading the Power Core software is optional and not necessary to use the Power Vision.

1. Go to www.dynojet.com/PowerVision.
2. From the top navigation menu, select Support>Downloads.
3. Click Power Core Software Download.
4. Double-click the saved file to begin installation. Follow the on-screen prompts. Refer to the Power Core Help for more information.

TROUBLESHOOTING

A few of the more common troubleshooting topics are listed below. For more topics visit the Dynojet Knowledge Base. For additional help, please contact Dynojet Technical Support.

UNABLE TO CONNECT TO BLUETOOTH

1. Verify you are within range.
2. Turn Bluetooth off and then on again.
3. Restart your phone. Restart the Power Vision 4.
4. Have your phone “forget” the Power Vision 4.
5. Clear the Bluetooth cache.

THE PHONE WILL NOT CONNECT TO POWER VISION 4
Location permission is required for the app to access the phone’s Bluetooth hardware.

1. Locate the Dynojet Power Vision 4 app on your phone.
2. Long-press the app until the context menu appears.
3. Press App Info or the icon.
4. Press Permissions.
5. Verify Location and Storage are both allowed.

ERROR FLASHING

1. Verify the Power Vision 4 app is up to date through either the Apple App Store or Google Play Store.
2. Connect the Power Vision 4 to your bike.
3. Verify the firmware is up to date.
4. Install the firmware update(s) if available.
5. Contact Dynojet Technical Support if the error persists.

HOW TO RECOVER THE ECU
You may need to recover the ECU if the fl ash was interrupted leaving the ECU in an incomplete fl ash state.

1. The Power Vision 4 will ask you to recover the ECU. Press OK. This will automatically fl ash the stock (.stk) fi le.
2. If the Power Vision 4 does not automatically fl ash the stock (.stk) fi le, you will need to manually choose a stock (.stk) fi le from your tunes. Ideally, this would be the stock (.stk) fi le you saved from your initial read.
3. Once the ECU is recovered, you will need to re-fl ash your tune.

HOW TO UPDATE THE FIRMWARE

1. Every time you connect to the Power Vision 4, the device automatically checks for new fi rmware. If newer fi rmware is found, the Power Vision 4 will ask you to update the device.
2. Press Yes to update the device.
3. You must update the device to continue. If you choose not to update the device, the app will close.

HOW TO MANAGE EXISTING TUNE LICENSES
Manage your existing Tune Licenses on the Dynojet website.

1. Log in to your Dynojet.com account using the same account you used to log in to the Power Vision 4 app.
2. Click My Account in the top, right corner of the browser. 3 Click Tune Licenses.

NO TUNE LICENSE IS AVAILABLE
Your new Power Vision 4 comes with one available tune license. Before you can fl ash additional vehicles, you will need to purchase additional tune licenses.

1. Log in to your Dynojet.com account.
2. Click My Account>Tune Licenses. View your purchased licenses. This will also show you which VIN the license fi le is associated with.

Purchase additional tune licenses to use with additional vehicles.
HOW TO PURCHASE A TUNE LICENSE
Through a Tune License, you can unlock the true potential of your Dynojet Power Vision 4. Your Power Vision 4 will be able to tune the original vehicle, as well as additional vehicles. Your Power Vision 4 device will remember each license that is applied, essentially multiplying the power of your device.
Each license is vehicle specifi c, not device specifi c, allowing you to load a Tune License onto any number of Power Vision units you have.

1. Visit https://www.dynojet.com/tuning-licenses/.
2. Log in to your Dynojet account.
3. Select the Tune License for the vehicle you wish to purchase and add it to your cart.
4. Check out following the prompts.

UNABLE TO LOG INTO MY DYNOJET ACCOUNT

1. Verify there is not a typo in your email or password.
2. Verify you have entered your full email address.
   • For example, “username@dynojet.com” instead of “username@dynojet.”
3. Passwords are case-sensitive. Verify caps lock is turned off.
4. Refresh your browser and try signing in again.
5. Did you forget your password? Click Forgot my password and follow the prompts.
6. Still having trouble, contact Dynojet Technical Support.

• 2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081 –800-992-4993 – DYNOJET.COM
• © 2021-2023 DYNOJET RESEARCH ALL RIGHTS RESERVED

Documents / Resources

| DYNOJET 2018 Can-Am X3 900 HO Launch Control Module [pdf] Installation Guide
2015-2017 Can-Am Maverick 1000R Turbo Max, 2015-2021 Can-Am Spyder F3, 2015-2021 Can-Am Spyder RT, 2016-2021 Can-Am Commander, 2017-2022 Can-Am X3 Turbo, 2017-2022 Can-Am X3 Turbo R, 2020 Can-Am X3 Turbo RR, and more refer to manual for full list ., 2018 Can-Am X3 900 HO, 2018 Can-Am X3 900 HO Launch Control Module, Launch Control Module, Control Module, Module
---|---

References

• Powervision | Dynojet
• Contact Us | Dynojet
• Customer Login | Dynojet
• Power Vision Tuning Licenses | Dynojet Licenses | Dynojet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>