Godox LEDP120C LED Light Panel Instruction Manual

Godox LEDP120C LED Light Panel Instruction Manual

GODOX Photo Equipment Co., Ltd.

Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com

godox.com

Made in China

Thank you for purchasing this Godox product!
LEDP120C video light is excellent for macro photography, wedding shooting, product shooting, photo journalistic and video recording, etc. The lightweight and portable light provides high brightness, convenient operation and accurate color temperature.

Features:

• High-quality LED bulbs
• Using lithium battery with great portability
• Soft and even illumination
• Included with a L-type bracket
• Adjustable light brightness and color temperature
• Fits almost any cameras and camcorders

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.

• Do not disassemble. Should repairs become necessary, this product must be sent to
  an authorized maintenance center.

• Keep out of reach of children.

• As this product do not have waterproof function, please take measures of waterproof
  in rainy or damp environment.

• Do not use or store the product if the ambient temperature reads over 50 ℃.

• Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.

• Observe precautions when handling batteries
  ● Do not put batteries into a fire or apply direct heat to them.
  ● Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove batteries when the product is not used for a long time or when batteries run out of charge.
  ● Should liquid from the batteries come into contact with skin or clothing, rinse immediately with fresh water.

Parts

Power Management

1. Power Supply
Two power supply modes is available:

• Using lithium battery: This light uses SONY NP-F970 model lithium battery.
• Using DC power jack: Please choose the DC 9.0V 1.5A adapter whose DC head’s inside diameter is 1.3mm.

Note: When using lithium battery, press the Battery Indicator Button and the battery level will be displayed.

2. Installing Lithium Battery

• Turn the Power Switch off.
• Target the socket of the lithium battery towards the “+” “-” contacts of the Battery Compartment. Push the battery in until it locks.
• Power the light on.
• After using the light, please power it off.
• When removing the battery, hold down the Battery Unlock Button and push out the battery in the opposite direction of pushing in.

3. Connecting DC Power Adapter

• Turn the Power Switch off.
• Insert the DC head of the adapter into the DC power jack, and power the light on.
• Please power it off and disconnect the DC power source after using.

Using the Video Light

1. On the Camera

• Install the L-type Bracket onto the 1/4″ Bracket Mounting Hole and tighten the upper locking ring of the L-type Bracket.
• Screw the lower locking ring of the L-type Bracket to the highest point and insert the Camera Hot shoe Connection horizontally into the hot shoe of a camera or a camcorder. Tighten the lower locking ring.

2. By the Handle

• Install the L-type Bracket onto the 1/4″ Bracket Mounting Hole and tighten the upper locking ring of the L-type Bracket.

3. On the Light Stand

• Install the light stand onto the 1/4″ Bracket Mounting Hole

Note: If your camcorder has no hotshoe connection, it is advised to purchase a camcorder connecting bracket in the market and install the video light through its 1/4″ Bracket Mounting Hole.

Operation

1. Before Usage
● Insert the lithium battery or DC power adapter.
● Switch the power on, the video light giving out light.

2. Light Brightness/Color Temperature Adjustment

What’s in the Box of LEDP120C?

Technical Data

• Product design and specifications are subject to change without notice.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe keep it. Thank you!

Note: This form shall be sealed by the seller

Applicable Products
The document applies to the products listed on the Product Maintenance information (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance information. The warranty period is calculated from the day (purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following
cases:

• The product or accessory has expired its warranty period;

• Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature,
  solvent, acid, base, flooding and damp environments, etc;

• Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;

• The original identifying information of product or accessory is modified, alternated, or removed;

• No valid warranty card;

• Breakage or damage caused by using illegally authorized, nonstandard or non-public
  released software;

• Breakage or damage caused by force majeure or accident;

• Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Godox After-sale Service Call 0755-29609320-8062

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>