Astera EXLK-KIT Exo Link Pro24 Kit User Manual
- June 13, 2024
- ASTERA
Table of Contents
USER MANUAL
EXO LINK
EXLK-KIT Exo Link Pro24 Kit
Joint Assembly, with adjustable angle, for Astera Helios, Titan and Hyperion.
Aluminum Silver anodized with cork pads and Titanium M5 thread. Wgt: gr. 42,
oz. 1,5.
Exo Link allows you to linearly connect an infinite number of Astera LED Tubes,
and in combination with the Exo Hold ultra flat hanging hook you can suspend
precise lines of Astera.
The two wheels allow you to align, the direction of the light emission. The surface of the locking wheels is covered with cork to hold the Astera tubes in tension without damaging them.
SAFETY: The Exo Skeleton system has been designed to expand the creative
potential with Astera Helios, Titan and Hyperion LED tubes for professional
users in the world of entertainment, television and cinematography. Astera
LEDs were not originally designed for heavy use with complex modularity and
it is recommended to carefully evaluate safety in the construction of complex
and sophisticated solutions that require professional support and anchoring
systems.
WARNING: Before using the Exo Skeleton system with the Astera LED tubes,
make sure that the two screws are well tightened with a Phillips screwdriver.
This is important for effective and safe use, avoiding wear of the parts in
contact.
ASSEMBLY INSTRUCTIONS:
It is important to follow the assembly procedure to avoid damaging the Astera LED tubes: follow the assembly steps as in the table, first suspending the anchor cables 1 and 2 then fix the Astera (3 – 4 always with two suspension points) and then fix the anchor cable 5 and finally mount the Astera on the two anchors 4 and 6. Never suspend the Astera LED tube on a single anchor point because it would be seriously damaged.
