ASTERA AF80 PlutoFresnel 80W RGBMA LED User Manual

June 13, 2024
ASTERA

ASTERA AF80 PlutoFresnel 80W RGBMA LED

Product Information

  • Product Name: PLUTO
  • Order Code: AF80
  • Manual Version: 1.0
  • Date of Issue: 14.07.2023
  • Manufacturer: Astera LED Technology GmbH
  • Address: Schatzbogen 60, 81829 Munich, Germany
  • Website: www.astera-led.com

Scope of Delivery

  • 1x PlutoFresnel (AF80)
  • 1x Fresnel Lens for PlutoFresnel (AF80-FL)
  • 1x Barndoor for PlutoFresnel (AF80-BD)
  • 1x Yoke for PlutoFresnel (AF80-YK)
  • 2x YokeBase for PlutoFresnel (AF80-YKB)
  • 1x TVMP Adapter (AX-TVMP)
  • 1x TrackHandle (AX-THD)
  • 1x Waterproof Protection Cover (PB15-PLG)
  • 1x User Manual

Introduction / Intended Use:

The PlutoFresnel is a versatile lighting device that can be used standing or hanging. It comes with AirlineTracks to attach the appropriate mounting accessories. The PlutoFresnel is suitable for both indoor and outdoor use and has an IP55 rating.
Before operating the device, please familiarize yourself with its functions. Unauthorized modifications to the device are not allowed for safety reasons. Any operation that deviates from the instructions in this manual may result in damages, voiding the warranty, and potential dangers such as short circuits, burns, electric shocks, or crashes. This device is not intended for household use or permanent installation.

Safety Information:

  • Read the manual carefully before operating the unit.
  • Include the manual if passing/renting/selling the unit to another user.
  • Exercise caution when operating the device.
  • This product is for professional use only.
  • The device contains a built-in rechargeable lithium-ion battery.
  • Do not open the device to avoid the risk of electric shock.

Secondary Safety Mounting:

When using the PlutoFresnel in a hanging position, it must always be secured by a safety wire. If the primary suspension fails, the device should not fall more than 20cm.

Cleaning and Maintaining:

To prevent damage to the electronics, avoid liquids entering the housing of the device. Clean the device using a soft damp cloth and do not use any cleaning agents or solvents.

Product Overview:

The PlutoFresnel features a multifunctional yoke, a barndoor zoom knob, a tilt lock, AirlineTracks for mounting accessories, a touch slider control panel, and various other components for color adjustment and brightness control.

Product Usage Instructions

Integrated Control Panel:

Use the menu buttons to navigate through the main menu. The integrated control panel provides direct access to settings for color adjustment and brightness/runtime control through symbol buttons.

TouchSlider:

The PlutoFresnel is equipped with a touch slider that is active on certain menus. It can be operated by sliding or tapping.

Top Navigation:

  • On / Off: Press to turn the device on or off.
  • Main Menu: Press to access the main menu.
  • Back to Previous Menu: Press to go back to the previous menu.
  • Reset Settings: Press to reset the device’s settings.
  • Scroll Down / Scroll Up: Press to scroll down or up in the menus.
  • ENTER: Press to choose or confirm a selection.
  • Set DMX Address: Press to set the DMX address for the device.
  • Change Input Select  Press to change the input source.
  • Color Adjustment: Access color adjustment settings through the touch slider.
  • Brightness and Runtime Control: Adjust brightness and runtime settings through the touch slider.

Follow these instructions to ensure safe and proper usage of the PlutoFresnel. For more detailed information, refer to the user manual provided with the product.

SCOPE OF DELIVERY

  • 1 x PlutoFresnel (AF80)
  • 1 x Fresnel Lens for PlutoFresnel (AF80-FL)
  • 1 x Barndoor for PlutoFresnel (AF80-BD)
  • 1 x Yoke for PlutoFresnel (AF80-YK)
  • 2 x YokeBase for PlutoFresnel (AF80-YKB)
  • 1 x TVMP Adapter (AX-TVMP)
  • 1 x TrackHandle (AX-THD)
  • 1 x Waterproof Protection Cover (PB15-PLG)
  • 1 x User Manual

INTRODUCTION / INTENDED USE

The PlutoFresnel from ASTERA is a LED Fresnel for professional use in the event and film industry. The PlutoFresnel is designed for direct or indirect illumination of objects and people. Due to its built-in battery, it can be quickly set up at places where traditional lights cannot be mounted easily. It has the Titan LED Engine and offers excellent color and light qualities. The PlutoFresnel generates white or colored light and the color temperature can be adjusted in many ways. It can be controlled with AsteraApp or with wired DMX or wireless CRMX. It is also possible to view and change settings via wireless RDM. The fixture can also be controlled by the integrated display or by infrared remote control. Thanks to its built-in Bluetooth it can be used as

BluetoothBridge (BTB).

  • The PlutoFresnel can be used standing or hanging. For this purpose, the device is equipped with AirlineTracks to attach the appropriate mounting accessories. The PlutoFresnel can be used indoors and outdoors and has an IP55 rating.
  • Do not shake the device. Avoid brute force when installing or operating the device. When choosing the installation spot, please make sure that the device is not exposed to extreme heat or dust. Avoid direct sunlight for longer periods of time. The specified ambient temperature must be maintained. Keep away from direct insulation (particularly in cars) and heaters. Never use the device during thunderstorms connected to the power mains. Overvoltage could destroy the device. Always disconnect the device during thunderstorms. Make sure that the area below the installation place is blocked when rigging, de-rigging or servicing the fixture. Always fix the fixture with an appropriate safety wire.
  • Operate the device only after having become familiarized with its functions. Please consider that unauthorized modifications on the device are not allowed due to safety reasons! If this device is operated in any way different from what is described in this manual, the device may suffer damages and the warranty may be void. The disclaimer includes all damages, liability or injury resulting from failure to follow the instructions in this manual. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, crash etc. This device is not for household use and is not suitable for permanent installation.

SAFETY INFORMATION

  • Before you operate this unit read the manual carefully. Always make sure to include the manual if you pass/rent/sell the unit to another user. Please use your own caution when operating. This product is for professional use only. It is not for household use.
  • Do not operate the unit in areas of high temperature conditions or under direct sunlight. It can cause abnormal behavior or damage the product.
  • Always use a suitable safety wire when mounting the light overhead.
  • Connect the safety wire only to the intended safety mount.
  • Always follow local safety requirements.
  • LI- ION Battery: A rechargeable lithium ion battery is built into this unit.
  • Only authorized personal may service the battery.
  • Do not place in fire or heat.
  • Do not use or charge the light if it is damaged.
  • Avoid bumping or plunging, it may cause fire or explosion.
  • Never store the battery when fully drained. Always recharge immediately when empty. Please do not charge unattended.
  • Make sure to fully charge all units before storing them.
  • Partially charged batteries will lose capacity.
  • Fully recharge every 6 months if not used.
  • The battery may only be replaced with an original spare part from Astera.
  • Follow applicable laws and regulations for transport, shipping, and disposal of batteries. For details on recycling lithium, lithium-phosphate, and lithium-ion batteries, please contact a government recycling agency or your waste-disposal service.
  • Always charge with flight case open.
  • It is recommended to charge at a temperature between 15°C and 35°C.
  • Warning: In extreme cases, abuse or misuse of standard/rechargeable batteries can lead to:
  • Explosion
  • Fire development
  • Heat generation or smoke and gas development
  • Do not look directly into the light.
  • It can cause harm to your eyes.
  • Do not look at the LEDs with a magnifying glass or any other optical instrument that may concentrate the light output.
  • Use only Astera approved accessories to diffuse or modify the light beam.
  • Do not open the product housing.
  • Do not apply power if the light is damaged.
  • Do not submerge the light into any liquid.
  • Do not replace the LED light source.
  • Caution, risk of electric shock.
  • The PlutoFresnel shall be installed near a socket-outlet which must be easily accessible.
  • Warning: risk of electric shock – Do not open device.
  • The exterior surfaces of the light can become hot, up to 70°C (158°F) during normal operation.
  • Ensure that accidental physical contact with the device is impossible.
  • Install only in ventilated locations.
  • Do not cover the light.
  • Allow all lights to cool before touching.
  • Keep 0.3 m (12″) from objects to be illuminated.

SECONDARY SAFETY MOUNTING

  • The PlutoFresnel must always be secured by a safety wire when used in a hanging position.
  • If the primary suspension fails, the device must not fall more than 20cm.

CLEANING AND MAINTAINING

  • Caution: Liquids entering the housing of the device can cause circuit and damage the electronics. Do not use any cleaning solvents. Only clean using a soft damp cloth.

PRODUCT OVERVIEW

Isometric view

Back view

USAGE

Integrated control panel
Use the menu buttons to navigate through the main menu. Settings for color adjustment and brightness/runtime are directly accessible by two symbol buttons.

Top navigation Inside the main menu

On / Off
Main menu| Back to the previous menu
Reset settings| Scroll down
Change input select| Scroll up
Set DMX address| Choose / Confirm
Color adjustment
Brightness and runtime control

TouchSlider
The PlutoFresnel has a touch slider. It is only active in certain menus and can also be operated by tapping.

Switching On / Off
A new PlutoFresnel needs a few seconds of charge to disable its shipping mode before it can be switched on.

  • Press the power button for one second and release it to turn on the PlutoFresnel. When you press the power button to turn on the light, the display will not turn on until you release the button. To turn off the light, press the power button once.

Fan control

  • The PlutoFresnel has a built-in fan that can be controlled as follows. Navigate to Fan Control menu. There you can choose between the following settings:
  • OFF: The fan always remains switched off. If the light becomes too hot, the brightness is gradually reduced. (Ambient temperature dependent)
  • AUTO: The fan starts on demand and switches between the three speeds as required. This is the default setting.
  • LOW: MED HIGH: Different speeds. The light never changes them by itself, but if the speed is too low, the brightness is gradually reduced. (Ambient temperature dependent)

More control options

  • On/Off, Static Colors, Preprogrammed Effects
  • All settings, Complex effects, Talkback+, Updates
  • Control from DMX consoles via CRMX or Wireless DMX
  • Control from DMX consoles via Power/Data Combination Cable
  • Remote Device Management (RDM) wireless

Connect Bluetooth Bridge (BTB)

To control your lights with the AsteraApp, first connect a Bluetooth Bridge (BTB). It forwards the AsteraApp signal to paired lights. You may use an AsteraBox as BTB or choose a light with built-in BTB, like PlutoFresnel, AX9, NYX Bulb, PixelBrick, Titan Tube BTB, Helios Tube BTB.

Connect AsteraBox as BTB

Please power on the AsteraBox. Connect the AsteraBox directly from the AsteraApp main menu by following the instructions there.

Connect light as BTB
Please note: This ONLY works for Astera lights with built-in Bluetooth. Please power on the light. Hold down the power button for 3 seconds until the light flashes blue. In the AsteraApp press „Manage Bluetooth Bridges“, then “+” and follow instructions on screen to connect. The light which is connected as BTB shows a small Bluetooth icon in the display.

Pair with lights

  • Once the AsteraApp is connected to a BluetoothBridge, you can pair your lights with the app:
  • Please power on the light(s). Then hold down the power button for 3 seconds until the lights flash blue. Go to “Pair with Lights” dialog in the AsteraApp. Then press OK.

Linking to a CRMX transmitter

  • The PlutoFresnel can be controlled via Wireless DMX/ CRMX. To do this, it must first be connected to a CRMX transmitter. There are two different methods to do this: either the connection is established by pressing a button on the transmitter or a linking key is set that matches the transmitter.

Linking via push button

  1. PlutoFresnel
  2. PlutoFresnel
  3. PlutoFresnel
  4. AsteraBox

Linking via linking key

Alternatively, PlutoFresnel can also be connected to a CRMX transmitter using a linking key, provided that the transmitter supports this linking option. To set a linking key, navigate in the main menu to „DMX SETTINGS“. Under „CRMX LINK BY KEY“ you can enter the desired eight-digit combination.

Reset

RESET sets „Input Select“ to „AUTO“ and runtime to 5 h.

Charging

While the power cable is connected, the display shows the charging status. Charge immediately when the battery is empty. Do not store the unit when the battery is empty.

Rigging

  • The PlutoFresnel is equipped with an Airline
  • Tracks on all four sides to attach various Astera mounting accessories.
  • When installing accessories on the airline tracks, they must audibly click into place!
  • With the included multi-functional yoke, PlutoFresnel can be easily hung or placed on the floor. When hanging, always secure with a safety wire at the safety eyelet on top of the light’s housing. Make sure the light cannot drop more than 20cm if the primary mounting fails.
  • The PlutoFresnel can also be mounted on tripods. For this purpose, a TVMP (TV to motion picture) adapter that can be attached to the yoke of the PlutoFresnel is included with the product.

Yoke (AF80-YK) attachment with YokeBase (AF80-YKB) – Quick Release

  • To attach the PlutoFresnel yoke, the two YokeBases must first be inserted into the AirlineTracks on opposite sides. To secure the YokeBase, turn the BaseLock clockwise.
  • The scales in the AirlineTracks help to ensure that the same position is selected on both sides.
  • There is a default position for the YokeBase.
  • You can move the YokeBase to balance the light or to use it in a different configuration. It is important that the
  • YokeBase is oriented so that the opening of the V points downward. When the light is properly prepared, the yoke can be inserted into the YokeBases from the bottom up.
  • The yoke is attached to the YokeBases with a Quick Release system. To release the yoke, first, loosen the Tilt Lock. This acts as a safety for the Quick Release. Once the Tilt Lock is loose, press the QuickRelease buttons on each YokeBase to release the fixture from the Yoke. Make sure to hold the fixture securely while releasing it.
  • Attention: Only unscrew YokeBase if the yoke is detached!

Yoke as floor stand

  • The PlutoFresnel yoke can be used to floor mount the light. To do this, the two legs are folded out.

Mounting options with Yoke (AF80-YK)

  • The PlutoFresnel Yoke has a mounting hole allowing for the use of up to 1/2″ or M12 bolt, as well as being able to be converted to a 3/8″ thread to attach spigots or bolts to the yoke. The 3/8″ thread adapter is mounted to the inside of the yoke and swings in place. There is also an AirlineTrack for use with TrackPin and similar.
  • On the left outside is a BrickMount (PB15-BMO), to which suitable Astera accessories, such as a RuntimeExtender can be attached.

TVMP Adapter (AX-TVMP)

  • The TVMP adapter has a 1/2″ thread on top and comes with a 1/2″ bolt with a washer. With this bolt, the TVMP adapter can be attached to the hole of the PlutoFresnel yoke.
  • This allows the PlutoFresnel to be mounted on stands using the BabyPin (5/8″) receiver or the JuniorPin (1-1/8″).
  • In this application, the TVMP T-Bolt can be stowed on a dedicated thread on the yoke to prevent it from being lost.

TrackHandle (AX-THD)

  • The included TrackHandle easily converts the PlutoFresnel into a handheld light. To do this, simply attach the TrackHandle with its robust double stud fitting to one of PlutoFresnel’s AirlineTracks.
  • The TrackHandle is also a useful accessory for the general handling of the light.

Beam modifiers

  • PlutoFresnel can not only be used as Fresnel but also be used as an open face light without any beam modifiers. In addition to the Fresnel lens, Barndoors are included in the product scope.

Fresnel Lens (AF80-FL)

  • With the included Fresnel lens
  • PlutoFresnel provides a beam from 15° to 60°.
  • To insert the Fresnel lens, pull the barndoor lock upwards (1) and turn it to the side (2). Now slide the Fresnel lens into the holder (3) and close the barndoor lock by lifting and turning it again (5). Make sure that the barndoor lock is properly engaged before moving the light.

Barndoor (AF80-BD)

  • 8 leaf barndoor is included as standard. They are inserted in front of the Fresnel lens in the same way as the Fresnel lens (4).

Zoom

  • The built-in zoom allows adjustment of the beam between 15° and 60°. There is a scale on the side of the lens tube for reference.

TROUBLESHOOTING

Problem Possible cause Solution
The fixture does not turn on. The battery may be empty. Connect it to power

and try again.
The fixture turns on and the display is on, but the LEDs do not emit light.| The fixture could be set to BLACKOUT mode. Set to display black color or is

operating in DMX mode and

doesn’t receive a valid signal.

| It is good practice to do a RESET SETTINGS.
The fixture is not working correctly – it does not display the color or effect chosen.| The fixture may still be operating under a previous setting.| It is good practice to do a RESET SETTINGS between setups.
The power cable is connected but the fixture is not charging.| The battery may be fully charged.| The fixture will only commence charging when its battery has a temperature of 45° C or less. Turn the fixture off and let it cool down; once cold enough, it will start charging.

SPECIFICATIONS – TECHNICAL DATA

Order Code AF80
LED Engine Titan LED Engine
Colors RGBMintAmber
Total LED Power 105 W
LED Power Draw 80 W
CRI (Ra)/ TLCI 3200- 6500 K* ≥ 96
Beam Angle 15° – 60°
Strobe 0 – 25 Hertz
Pixels 1
Battery Runtime Up to 20 hours
Battery Runtime max. Brightness 3h
Battery Lifetime 80 % after 400 cycles
DC Input 24 VDC, 80 W
DC Connector 5.5 mm x 2.1 mm
Power Consumption (max.) 80 W
Wired DMX Yes via FP3-DTL / PWB-2-86W
CRMX Receiver Built-in
BluetoothBridge BTB Built-in
Wireless Protocols CRMX, UHF, Bluetooth, WiFi
Wireless Range CRMX/UHF up to 300 m / 330 yds Bluetooth up to 3 m / 3.3 yds
RDM Support Wireless
Infrared Control Yes
TouchSlider Yes
Housing Material Polymer & Metal
IP Rating unwired IP55 (only with PB15-PLG)
IP Rating wired IP55 (only with PWB-CAB-0.2/-1.5/-5/-10/-15)
Ambient Operating Temperature 0 – 40 °C / 32 – 104 °F
Weight (with AF80-FL, AF80-BD) 4.637 kg / 10.22 lbs
Weight (with AF80-FL, AF80-BD, AF80-YK, 2x AF80-YKB, AF80-THD) 6.493 kg /

14.31 lbs
Dimensions L x W x H| 281.9 mm x 153.5 mm x 161.8 mm / 11.1″ x 6.0″ x 6.4″
Dimensions L x W x H (AF80-YK, 2x AF80-YKB)| 281.9 mm x 244.7 mm x 323 mm / 11.1″ x 9.6″ x 12.7″

DISPOSAL

  • The light contains a lithium ion battery.
  • Don‘t throw the unit into the garbage at the end of its lifetime.
  • Make sure to dispose of according to your local ordinances and/or regulations, to avoid polluting the environment!
  • The packaging is recyclable and can be disposed.

MANUFACTURERS DECLARATION

Hereby, Astera LED Technology GmbH declares that the type of radio equipment PlutoFresnel complies with Directive 2014/53 / EU. The full text of the EU Declaration of Conformity is available at the following Internet address:
https://astera-led.com/plutofresnel.

FCC

Astera LED Technology GmbH declares that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment.
  • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20 cm from nearby persons.

RF CHARACTERISTICS

Wireless Modules| Modulation| ERP

(Transmitter)

| Channel Count
---|---|---|---
EU: UHF***(863-870 MHz)| FHSS| < 25 mW| 47
USA: UHF (917-922.20 MHz)| FHSS| < 25 mW| 53
AUS: UHF (922.30-927.50 MHz)| FHSS| < 25 mW| 53
SGP: UHF (920.50-924.50 MHz)| FHSS| < 25 mW| 41
KOR: UHF (917.9-921.5 MHz)| FHSS| < 25 mW| 10
RUS: UHF (868.75-869.12 MHz)| FHSS| < 25 mW| 6
JPN: UHF (922.80-926.40 MHz)| FHSS| < 25 mW| 19
CRMX (2402-2480 MHz)| FHSS| < 100 mW| 79
Bluetooth 5.0 LE

(2402-2480 MHz)

| FHSS| 10 mW (BLE)| 40
WiFi (2412-2472 MHz)| DSSS, OFDM| < 100 mW| 13

General allocation of frequencies for use by short-range radio applications

Spectrum usage regulations:

The frequency range in MHz 1)| Maximum equivalent radiant power (ERP)| Additional parameters/frequency access and interference mitigation techniques
---|---|---
865 – 868| 25 mW| Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.
868,0 – 868,6| 25 mW| Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.
868,7 – 869,2| 25 mW| Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 0.1% can be used.
869,40 – 869,65| 500 mW| Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 10% can be used.
869,7 – 870,0| 25 mW| Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

  1. The use of adjacent frequency bands within this table as a single frequency band is permitted, provided that the specific conditions for each of these adjacent frequency bands are met.
  2. duty cycle“ means the ratio of (Ton)/(Tobs) expressed as a percentage, where ‚Ton‘ is the ‚on-time‘ of a single transmitting device and ‚Tobs‘ is the observation period Ton is measured in an observation frequency band (Fobs). Unless otherwise specified in this general allocation, Tobs is a continuous period of one hour and Fobs is the applicable frequency band in this general allocation (table).
  3. Frequency access and interference mitigation techniques shall be used whose performance level at least meets the essential requirements of Directive 2014/53/EU or the Radio Equipment Act (FuAG). Where relevant techniques are described in harmonized standards, the references of which have been published in the Official Journal of the European Union pursuant to Directive 2014/53/EU, or parts thereof, performance shall be ensured which is at least equivalent to those techniques.

Documents / Resources

| ASTERA AF80 PlutoFresnel 80W RGBMA LED [pdf] User Manual
AF80, AF80 PlutoFresnel 80W RGBMA LED, PlutoFresnel 80W RGBMA LED, 80W RGBMA LED, RGBMA LED, LED
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals