YAMAHA WS-X1A True X Speaker Instruction Manual
- June 16, 2024
- Yamaha
Table of Contents
YAMAHA WS-X1A True
Product Information
Specifications
- Model: VFJ7510
- Languages: English (EN), French (FR), German (DE)
- Quick Start Guide: Link
Included Accessories
- USB cable (for charging the unit)
- Additional Information (TRUE
- Quick Start Guide (this document)
- Safety Brochure
Control Buttons
-
Power button
-
Mode button
- The unit’s mode changes each time this button is pressed, and the SURROUND lamp (F) or SOLO lamp (G) shows the selected mode.
- SURROUND: This mode is used when using the unit in combination with a Yamaha sound bar (See 3-B below).
- SOLO: This mode is used when using this unit alone.
-
Clear Voice button
- When the Clear Voice function is enabled, the Clear Voice lamp (H) glows, and human voices such as dialogs can be heard more easily
-
Play/Pause button
- During playback, press the button twice quickly to skip to the next song, or three times to skip backward to the beginning of the current song or previous song
-
Volume buttons
Charging the Unit
- Charge the unit before using it.
- Use a commercially available USB power adapter that can output DC 5V (2A or more) when charging the unit.
- A charging cradle (Yamaha CC-T1A; sold separately) can also be used to charge the unit.
- Connect the Type-C connector of the USB cable to the USB port on this unit.
- Connect the Type-A connector of the USB cable to the USB power adapter.
- Plug in the USB power adapter to an AC wall outlet.
- The power lamp (E) glows orange and charging will start.
- When charging is completed, the power lamp turns off.
Turning on/off the Unit
- Press and hold the power button to turn on the unit.
- The power lamp (E) flashes to indicate the remaining battery level.
- Flashing white: The remaining battery level is more than half.
- Flashing orange: The remaining battery level is less than half.
- To turn off the unit, press and hold the power button again.
Connecting to Bluetooth Device
- Enable the Bluetooth function on the Bluetooth device.
- Select this unit (Yamaha WS-***) from the list of available devices to connect to.
- The model name of your product (X1A) will be displayed in place of ***.
- When the connection is established, the SOLO lamp glows blue.
- Start playback of audio on the Bluetooth device.
Connecting to a Sound Bar
When using this unit as a surround speaker for Yamaha sound bars, refer to
the following website for instructions:
Link
Be sure to read the included Safety Brochure before use. Keep it readily available for future reference.
- This document guides you through connecting this product to a Bluetooth® device such as a smartphone via Bluetooth and playing music files. More details are explained in the User Guide. Access the following URL to see the User Guide https://manual.yamaha.com/av/21/wsx3a_x2a_x1a/
Included accessories
- USB cable (for charging the unit)
- Additional Information (TRUE X SURROUND)
- Quick Start Guide (this document)
- Safety Brochure
Control buttons
- Power button
- Mode button
The unit’s mode changes each time this button is pressed, and the SURROUND lamp (F) or SOLO lamp (G) shows the selected mode.
- SURROUND: This mode is used when using the unit in combination with a Yamaha sound bar (See 3-B below).
- SOLO: This mode is used when using this unit alone.
Clear Voice button
When the Clear Voice function is enabled, the Clear Voice lamp (H) glows, and
human voices such as dialogs can be heard more easily.
Play/Pause button
During playback, press the button twice quickly to skip to the next song, or
three times to skip backward to the beginning of the current song or previous
song.
Volume buttons
Charging the unit
Charge the unit before using it. Use a commercially available USB power adapter that can output DC 5 V (2 A or more) when charging the unit. A charging cradle (Yamaha CC-T1A; sold separately) can also be used to charge the unit.
- Connect the Type-C connector of the USB cable to the USB port on this unit.
- Connect the Type-A connector of the USB cable to the USB power adapter.
- Plug in the USB power adapter to an AC wall outlet.
The power lamp (E) glows orange and charging will start. When charging is completed, the power lamp turns off.
Turning on the unit
Press and hold the power button. The power lamp (E) flashes to inform you of the remaining battery level. Flashing white: The remaining battery level is more than half. Flashing orange: The remaining battery level is less than half. After showing the status, the unit turns on. To turn off the unit, press and hold the power button again.
Connecting a Bluetooth device
Follow the procedure below when the SOLO lamp (G) is flashing in blue to connect a Bluetooth device.
- On the Bluetooth device, enable the Bluetooth function.
- On the Bluetooth device, select this unit (Yamaha WS-) from the list of available devices to connect to. The model name of your product (X1A) is displayed in place of . When the connection is established, the SOLO lamp glows blue.
- Start playback of audio on the Bluetooth device.
Connecting to the soundbar
When using this unit as a surround speaker for Yamaha sound bars, see the following website https://manual.yamaha.com/av/truexsur/register.html
FAQ
Q: Where can I find the Safety Brochure?
A: The Safety Brochure is included with the product. Keep it readily available for future reference.
Q: Can I charge the unit with a charging cradle?
A: Yes, you can use a charging cradle (Yamaha CC-T1A; sold separately) to charge the unit.
Q: How do I know the remaining battery level?
A: The power lamp flashes to indicate the remaining battery level. Flashing white means the remaining battery level is more than half while flashing orange means it is less than half.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>