HUUM Embedding Flange for Cliff-Steel Heaters User Manual

June 12, 2024
HUUM

HUUM Embedding Flange for Cliff-Steel Heaters

HUUM-Embedding-Flange-for-Cliff-Steel-Heaters-product

Product Information

The product is called UPUTUSKRAE and it is an embedding flange for use with a heater. It is designed to be used in conjunction with slats to create a square opening of size 42.4 x 42.4 cm. The embedding flange is manufactured by Huum, a sauna equipment company. For more information about the product, you can visit the official website at www.huum.eu.

Product Usage Instructions

  1. Prepare a square opening with a size of 42.4 x 42.4 cm for the embedding flange.
  2. Place the slats around the heater so that they fit tightly into the opening.
  3. Make sure that the sides of the slats fit together.
  4. Fasten the corners of the slats to the floor using screws.
  5. The installation process is now complete.

If you have any further questions or need assistance, please refer to the user manual or contact Huum directly through their website.

EMBEDDING FLANGE

  • Prepare a square opening with a size of 42.4 x 42.4 cm for the embedding flange.
  • Place the slats around the heater so that they fit tightly into the opening.
  • Make sure that the sides of the slats fit together and fasten the corners to the floor using screws. Done!

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals