BRIGADE VBV-2220C-AI-D04 1080P Intelligent Pedestrian Detection Camera User Manual

BRIGADE VBV-2220C-AI-D04 1080P Intelligent Pedestrian Detection Camera

Please read this manual thoroughly before operating the device and keep it for future reference. V1.0

Precautions

Storage and Operation

1. Storage temperature: -40~+85℃, operating temperature: – 20~+70℃
2. Avoid dropping or striking this device.
3. Never use sharp tools, scratch, or use abrasive cleaning material as this may damage the housing on this device.
4. Do not place external wiring material where they may be pinched or stepped on.

Operating Precautions

1. Working voltage: 10-32V DC. Using the incorrect power supply and incorrect voltage may cause the device damage permanently.
2. Make sure all cables are connected properly.
3. Please ensure lens is not obscured.
4. Once installed if the device position is manually adjusted, it will need to be re-calibrated to ensure correct operation/detection.

! Warning

1. Excessive working voltage will damage the equipment.
2. If a monitor is used, please only use when necessary to minimise distraction while driving
3. Never try to disassemble this device without professional assistance

! Caution

Never try to repair this device by yourself. In case of any problems, please turn off the device at once and notify our company or authorised dealer.
The device is a complex device. Any disassembly or modification may lead to damage and void the warranty.

Maintenance

1. Remove all the cable connections from the device before cleaning the device.
2. Use a mild household detergent and clean the unit with a slightly damp, soft cloth.
3. Never use strong solvents such as thinner, as they might damage the finish of the device.

Caution
Risk of electric shock Do not open

Caution: to reduce the risk of electric shock,
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This symbol is intended to alert the user not to dispose of electrical and electronic equipment.

CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your warranty and necessitate expensive repairs.

What’s in the box

2.1 VBV-2220C-AI-D04 (Front) Packing Contents Bill of Materials (BOM)

Part Number: 7321
Model Number: VBV-2220C-AI-D04 (Front)

VBV-2220C-AI-D04: Front AI Camera
link for installation guide www.brigade-electronics.com/product- support

VBV-2230C-AI-D04 (Rear)

Part Number: 7396
Model Number: VBV-2230C-AI-D04 (Rear)

VBV-2230C-AI-D04: Rear AI Camera
link for installation guide www.brigade-electronics.com/product- support

Product Specification

AI-Pedestrian detection (1080P) Product Specification

Model Number:
VBV-2220C-AI-D04 (7321)
VBV-2230C-AI-D04 (7396)

*All measurements in mm

Package Contents
Depending on camera model chosen:

1 x VBV-2220C-AI-D04 (7321) – Camera
or
1 x VBV-2230C-AI-D04 (7396) – Camera
Below included in camera box:
1 x VBV-22X0C-CA (S7346) – Camera cable adapter
1x VBV-22X0C-AI-D04-QR (7338) – QR link card
1 x VBV-22X0C-AI-AK3 (7345) – 3mm Allen Key

Key Features

Detection Range:

• VBV-2230C-AI-D04 – 11 metres Max
• VBV-2220C-AI-D04 – 19 metres Max
• Pedestrian detection warning box
• Audio alarm output through monitor
• Alarm trigger output when using VBV-22X0C-CA
• Camera is 8 pin connection, when using VBV-22X0C-CA this changes to the standard 4 pin VBV Type Female Connector (Included in kit)

Technical Specifications

• Operating Voltage: DC 10V-32V

• Current Consumption: 260mA @12V, 140mA @24V
  TV Systems:

• 30fps

• Picture Elements: 1920 X 1080P
  Visual Resolution: 1080P AHD Viewing Angles:

• VBV-2230C-AI-D04: 129°(H), vertical 70°(V)

• VBV-2220C-AI-D04: 52°(H), vertical 30°(V)
  Video Output:

• Approx 1.0 Vp-p / 75Ω
  Length of Cable:

• 390mm, extensions cables available
  Overall Dimensions:

• 97.5 × 75.3 × 72mm
  Housing Material: Metal
  Finish: Black
  Assembled Weight:

• 500 Grams

Environmental Specifications

• Operating Temperature: -20° to +70°C
• IP Rating: IP69K
• Vibration Resistance: 5.9G

Approved Standards

• e-mark UNECE R10 Compliant
• CE
• UKCA
• FCC
• ICES
• REACH
• WEEE

System Connection

Camera, camera extension cable, camera adapter, buzzer, MDR to monitor

Camera, camera extension cable, camera adapter, buzzer, camera power cable to monitor

Camera, extension cable, camera adapter, buzzer, camera power cable

Pedestrian Detection

When Pedestrians are entering the detection zone, the machine operator can receive either/ or the following alerts:

1. When connected to a monitor, every pedestrian detected within the detection zone is tracked and identified with a red frame around them and an audible alarm (if supported by the monitor), the alarm will continue until the pedestrian leaves the detection zone.
2. When connected to an internal buzzer, the machine operator will receive a visual alert (if connected to a monitor) and an audible alarm, the alarm will continue until the pedestrian leaves the detection zone.

No pedestrian within the detection zone Pedestrian entering the detection zone

Installation

VBV-2220C-AI-D04: 52° (H), vertical 30° (V) Typical installation for front camera.

VBV-2230C- AI-D04: 129° (H), vertical 70° (V)
Typical installation for rear camera.
The camera installation minimum hight is recommended to be 1m.The AI pedestrian detection area is not representative of the camera viewing angle.

Troubleshooting

The symptoms described below do not necessarily mean a failure within the camera. Please check the following items before you initiate a request for support.

Check power supply is within DC 10~32V. The volume is set “0 “ on the monitor.

Camera boot up| Remove the extension cable connection and connect again.
Cable installation length| Please note that if you use an extension cable more than 20m this will cause degeneration on the camera’s image.
Image shown but no AI functions| The image may have been flipped using an MDR interface. If so return the image to its original view on the MDR, then either flip the image through the monitors settings, or turn the camera round.
Image is flickering| Two solutions:

1.   Use the approved extension cable

2.  If the approved extension cable is not being used, please note you will require to find a earth (GND) for the output trigger wire.

Disclaimer
Our products are supplied as an aid to safety and they DO NOT replace the operator’s and/or driver’s obligation to ensure the safety of the vehicle or machine, the proper and safe operation of the vehicle or machine and nor do they replace your obligations to ensure the safety and suitability of the vehicle or machine.
Please find full conditions here:
https://brigade-electronics.com/wp-content/uploads/2023/04/Brigade-Official- Warranty-and-Conditions-of-Warranty-Documentation-1-May-2023.pdf
Specifications subject to change.

www.brigade-electronics.com

References

• Brigade Electronics: Leading Commercial Vehicle Safety Solutions
• Product Support - Brigade Electronics - Downloads

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>