BRIGADE BL-2120C Front Camera Monitor System User Manual
- October 30, 2023
- BRiGADE
Table of Contents
BRIGADE BL-2120C Front Camera Monitor System
Product Information BL-2120C Manual
The BL-2120C is a camera that allows you to adjust the angle of view according to your preferences. It comes with a sliding arm that enables you to move the lens up and down to find the desired viewing angle. The camera also has a screw mechanism that allows you to tighten or loosen the sliding arm, ensuring the camera stays in place once you find the desired angle.
Product Usage Adjusting the Angle of View
Follow these steps to adjust the angle of view on your BL-2120C camera:
- Using a Philips head screwdriver, remove the back case from the camera. This will reveal the sliding arm.
- Loosen the sliding mechanism using the Philips head screwdriver.
- Slide the lens up and down until you find the desired viewing angle.
- Tighten the screw on the sliding mechanism to ensure that the camera stays in place.
- Replace the cover and fixing screw on the back of the camera.
For more technical information and documentation, visit https://brigade- electronics.com/product-support-area/. If you have any further questions or concerns, contact technical support at technical@brigade- electronics.com.
For more information about our products, visit our website at www.brigade- electronics.com.
INSTALLATION INSTRUCTIONS
- Step 1 Remove the back case from the camera with a Philips head screwdriver to reveal the sliding arm.
- Step 2 Loosen the sliding mechanism using the Philips head screwdriver.
- Step 3 This will now allow the lens to slide up and down to find the desired viewing angle. Once the camera has been adjusted to the desired angle, tighten the screw on the sliding mechanism, then replace cover and fixing screw.
References
- electronics.com
- Brigade Electronics | Commercial Vehicle Camera Systems
- Brigade Electronics | Commercial Vehicle Camera Systems
- Product Support Area | FAQs | Brigade Electronics