BRiGADE Safety Camera User Manual
- October 30, 2023
- BRiGADE
Table of Contents
BRiGADE Safety Camera
Product Information
The BL-2730M is a mirror monitor that supports CVBS/AHD 720P/AHD 1080P. It comes with a 7-inch new TFT panel screen with an aspect ratio of 10:9 image. The monitor has 2-channel video input with 2 trigger cable inputs and can auto switch between PAL and NTSC systems. It has a resolution of 1024 x R.G.B x 600 and a brightness of 450cd/m2. The power supply required for the monitor is 12-24V DC. The kit includes a BL-270HM 2 Channel Mirror Monitor, a BL-270HM- BKT Dash-mount bracket, and a BL-270HM-PC 2CH Video Input, 2 x alarm trigger inputs, Power and GND.
Product Usage Instructions
- Connect the Power and GND cables to Negative12-24V to positive.
- Connect AV1 – AV2 cables to camera 1 and camera 2.
- Connect Trigger AV1 – Trigger AV2 cables to trigger the video AV1AV2.
- Use the Menu Tree to customize the view, system settings, and default settings as per your requirements.
Note: Channel 1 video has priority over Channel 2 video if these are
triggered at the same time.
For more information, technical documents or support, please visit https
://brigade-electronics.com/product-support-area/ or contact technical support at
technical@brigade-electronics.com.
Kit Contents
Mirror Monitor
- Power
- Up
- Menu
- Down
- Channel 1/ Channel 2
- IR
Monitor Specification
- Screen size: 7-inch new TFT panel
- Aspect Ratio: 10:9 image
- Input: 2-channel video input with 2 trigger cable inputs .
- System : PAL and NTSC auto switching
- Resolution : 1024 x R.G.B x 600
- Brightness : 450cd/m2
- Power supply: 12-24V DC
- Built-in speaker
- Operation Temperature: -30℃~+70℃
- Storage Temperature: -40℃~+80℃.
Cable
Note: Channel 1 video has priority over Channel 2 video if these are triggered at the same time.
Usual manual
- Power connected, GND to Negative;12-24V to positive。
- AV1 – AV2 connect to camera 1 and camera 2。
- Trigger A V1 – Trigger AV2 cables to trigger the video AV1、AV2
Wiring Diagram
Menu Tree
View
- Brightness:0-100
- Saturation:0-100
- Contrast:0-100
- Hue:0-100
System
- Reversing Line : MODE 1(2/3)
- Astern Delay : 3s/6s/9s
- Language : English/Japanese/Chinese
- Rotate: LU/RD
- Version : Shows installed O/S/ Firmware version
- Resolution :720P/1080P/CVBS PAL/CVBS N
- Audio Switch : OFF/ON
- Backlight Mode : OFF/ON
- Default Setting
- Image Mirror
- technical@brigade-electronics.com
- www.brigade-electronics.com
- Please refer tohttps://brigade-electronics.com/product-support-area/ for more information and technical documents
References
- electronics.com
- Brigade Electronics | Commercial Vehicle Camera Systems
- Brigade Electronics | Commercial Vehicle Camera Systems
- Product Support Area | FAQs | Brigade Electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>