BRIGADE BL-2120C AHD Front Camera Monitor System User Manual
- October 30, 2023
- BRiGADE
Table of Contents
BL-2120C AHD Front Camera Monitor System
User Manual Adjusting the Angle of view
BL-2120C AHD Front Camera Monitor System
Please refer to https://brigade-electronics.com/product-support-area/ for
more information and technical documents
Step 1
Remove the back case from the camera with a Philips head screwdriver to reveal
the sliding arm.
Step 2
Loosen the sliding mechanism using the Philips head screwdriver.
Step 3
This will now allow the lens to slide up and down to find the desired viewing
angle. Once the camera has been adjusted to the desired angle, tighten the
screw on the sliding mechanism, then replace cover and fixing screw.
technical@brigade-electronics.com
www.brigade-electronics.com
References
- electronics.com
- Brigade Electronics | Commercial Vehicle Camera Systems
- Brigade Electronics | Commercial Vehicle Camera Systems
- Product Support Area | FAQs | Brigade Electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>