BRiGADE BL-2130C Van Lite Rear Facing Number Plate AHD Camera User Manual
- October 30, 2023
- BRiGADE
Table of Contents
BRiGADE BL-2130C Van Lite Rear Facing Number Plate AHD
Product Information
The BL-2130C is a camera designed for use in vehicles. It is equipped with an
adjustable lens that allows the user to change the angle of view according to
their preferences.
For more information and technical documents, please visit www.brigade-
electronics.com/brigadevan.
Product Usage
Adjusting the Angle of View
Follow the steps below to adjust the camera lens angle:
- Locate the two screws on either side of the camera lens on the front of the camera.
- Using a Philips head screwdriver, loosen the screws. Do not fully remove them.
- Once the screws are loose, move the camera lens housing up or down to adjust to the preferred viewing angle.
- Tighten the screws to secure the camera lens in place.
If you have any technical questions or concerns, please contact technical support at [email protected] or visit www.brigade-electronics.com.
INSTALLATION INSTRUCTION
Please refer to www.brigade-electronics.com/brigadevan for more information and technical
Step 1
- On the front of the camera, there are 2 screws on either side of the camera lens, loosen these using a Philips head screwdriver *Do not fully remove them.
Step 2
- Once the screws are loose move the camera lens housing up or down, adjust to the preferred viewing angle and then tighten the screws.
- [email protected]
- www.brigade-electronics.com
Documents / Resources
|
BRiGADE BL-2130C Van Lite Rear Facing Number Plate AHD
Camera
[pdf] User Manual
7310, BL-2130C Van Lite Rear Facing Number Plate AHD Camera, BL-2130C, Van
Lite Rear Facing Number Plate AHD Camera, Van Lite Number Plate AHD Camera,
Rear Facing Number Plate AHD Camera, Number Plate AHD Camera, Rear Facing
Number Plate, Number Plate Camera, AHD Camera, Camera
---|---
References
- electronics.com
- Brigade Electronics | Commercial Vehicle Camera Systems
- Brigade Electronics | Commercial Vehicle Camera Systems