kogan KA05DRFLDLA 50W Driverless Flood Light User Guide
- June 13, 2024
- Kogan
Table of Contents
50W Driverless Flood Light
Quick Start Guide
Safety & Warnings
- Read all instructions before use and retain for reference.
- This product should only be installed or serviced by a qualifred professional.
- Installation must follow Australian Wiring Rules AS/NZS 3000.
- To prevent electric shock, please ensure that power is disconnected before installing.
- Do not use corrosive substances to clean the glass and lamp body
- Children should be supervised to ensure that they do not play with appliance
- Do not attempt to adjust the angle of the fixture until the unit has been switched off and had time to cool down,
- Do not touch the lamp body during operation.
- Keep the light source at least 0.3m away from flammable surfaces
- Direct eye contact with the LED can cause eye damage
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support after consulting the Troubleshooting section of this manual
Overview
Packaging & product dimensions
Specifications
| Lamp Power | 50W | IP Rate | IP65 |
|---|---|---|---|
| Product Size | 25517543mm | CRI | >80Ra |
| Luminous Efficiency | 80-90LM/W | LED Quantity | 120pcs |
| Color Temperature (CCT:K) | 4000K | Power Factor | > 0.9 |
| Shell Material | Die-casting Aluminum+Toughened Glass | Beam Angle | 120° |
| Input Voltage | AC220-240V/ 50-60Hz | Driver | On Board |
| Working Temperature | -40-+40°C | Light Source | SMD2835 |
| Certificates | SAA,C-TICK,CE,RoHS | Working Life | 50,000Hrs |
Installation
WARNING
- Incorrect installation can damage the product and will void warranty.
- The external flexible cable/cord is not replaceable. If it is damaged, the product will be irreparable.
- Do not perform any modification or change any parts within the light fixture.
- The yellow/green conduct must be earthed in order to avoid potential electric shock.
Instructions
- Disconnect the power supply before installation.
- Drill holes according to the positions marked below.
- Secure the lamp bracket by tightening the screws (not provided)
- Turn the lamp body to adjust the light angle as needed.
- Insert the lamp plug into socket and power on.
| Recommended Mounting Height | 4m≤H≤10 m |
|---|---|
| Max. Projected Area | 132.3m2 |
| Weight | 1.35kg |
Cleaning & Care
- Clean the glass and casing with a dry cloth. Do not use any corrosive agents.
User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.koban.com/usermanuals/
Read User Manual Online (PDF format)
Loading......