kogan KABLUHANDSFM 4 In 1 Bluetooth Car Kit User Manual
- June 13, 2024
- Kogan
Table of Contents
4-in-1 Bluetooth Car Kit
KABLUHANDSFM
USER MANUAL
Please read this operating manual carefully before you use the product.
Introduction
This product is a special Bluetooth car charger that can switch the call to
the hands-free state via the professional Bluetooth module, as long as the
mobile phone is equipped with the Bluetooth function. When the call is
finished, it will be switched to music play automatically. It can also send
the music in your phone to your car radio wirelessly.
You can enjoy the music and answer calls in hand-free mode without refitting
your car.
Product Layout
1. Volume up/down, CH+/-
2. Power Indicator Light
3. LINE input hole
4. Bluetooth Power Switch
5. Answer/Redial| 6. Microphone
7. Hang Up/Reject Call/Switch to CH FM Mode
8. LED Display Window
9. Power Adaptor 9V-24V
10. USB Output 5V
---|---
Product Features
- Adjustable angle to suit all types of vehicles
- FM transmitter
- LED display window
- LINE audio input
- Independent Bluetooth start/shutdown button
- Answer/Hang up/reject/redial via Bluetooth
- Bluetooth stereo music playback
- Call Echo Cancellation and Noise Reduction technology
- Dual USB output voltage, provides power to other devices and the maximum output is 5V/2.1A
- Automatic memory function for power failure frequency point
Operation Instructions
Bluetooth Mode
- Plug the unit into the car cigarette lighter socket and switch the power to ON. The unit will start up and the LED will display the frequency point once it is powered.
- If your phone is connecting to the Bluetooth hands-free for the first time, pairing the units is required.
- Enable the Bluetooth function on your phone while the Bluetooth handsfree is on, and look for “BC-06” in the device list on the phone.
- Select “BC-06” and pairing will occur automatically. A prompt will sound once pairing has occurred.
Making a call
Dial the number by pressing the phone number under the connected state, and
sound will be given out from the car audio.
Answering a call
If there is an incoming call under the connected state, press the key to
answer the call. Once the call has been answered, press to switch between the
mobile phone microphone and the unit microphone. Press to hang up.
Callback
Press twice while connected via Bluetooth to call back the last call.
Reject a call
For a call you do not want to answer, press to reject while it is ringing.
Playing music from your phone
Play Music from your Phone
This unit supports A2DP functionality, which allows you to play music from
your phone. Music can then be transmitted to your car radio as an FM signal so
you can enjoy high quality music. Press the key to play/pause, and press for
the next/last song. ( Note: some phones with less advanced operating
systems may not support this function).
Audio Input Mode
Insert the attached line-in cable with one end inserted to the sound source, and the other end to the product audio hole. Press to turn up/down the volume, or hold to turn the volume up/down quickly.
FM Adjustment
Press and hold to enter frequency selection state. The frequency on the LED window will flash. Press to increase/decrease the frequency, or press and hold to increase/decrease the frequency quickly. Frequency is adjustable within 87.5 ~ 108MHZ.
Power-off Memory
Whenever the unit is powered off, the system will memorise the previously set FM frequency and the Bluetooth connection in order to facilitate future usage.
Technical Parameters
Rated working voltage | 12V |
---|---|
Limited working voltage | 9 ~ 26V |
USB output | 5V / 2.1A |
Working temperature | 0 ~ 50C |
SNR | >60dB |
Degree of distortion | <0.1% |
Frequency response | 20Hz ~ 15Khz |
Resolution of right and left channel | >60dB |
Bluetooth version | Version 2.1+EDR |
Bluetooth sound processing | A2DP (Advance Audio Distribution Profile) function |
supported
Bluetooth transmission distance| 10M
Effective distance of Bluetooth microphone| 0.5 ~ 2M
FM frequency| 87.5 ~ 108Mhz
FM mode| Stereo digital PLL frequency locking
Notes
- This product contains dual USB outputs. It can charge two devices at the same time with the maximum output of 5V/2.1A.
- Once booted, the product will connect automatically with the phone via bluetooth. If you insert the LINE connection after the bluetooth connection, the LINE mode will function.
- Never turn the volume to be too loud (generally at 28 or below) when FM is working so as to avoid sound distortion. Please adjust the sound volume through the car audio.
- A built-in antenna is provided for the product, so please avoid using the broadcasting station frequency that is with strong signal so as to get better sound effect.
- The method to operate Bluetooth may differ due to the difference of phones.
- Some phones may not support automatic reconnection after being disconnected from the Bluetooth. If so, please connect them manually by hand.
- This product is compatible with more than 95% phones on the market but some are still incompatible. Please pay attention to it when purchasing our product.
- The volume should set to a reasonable level during the call to avoid affecting the other persons call quality due to echo playback.
- Do not use this product in high temperatures or in locations with dust or moisture.
- Avoid dropping the product to prevent damage to the surface or the body.
- The Bluetooth of this product supports background play. If there is a prompt tone when playing music with LINE function, it will be automatically switched to the Bluetooth mode. To return to LINE function, please pull and plug the LINE in again.
If you have any further questions or concerns, please contact theKogan.com customer support team.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>