LEXON LR153 Mini Sunrise Dawn Simulator Alarm Clock User Manual

LEXON LR153 Mini Sunrise Dawn Simulator Alarm Clock User Manual

IN THE BOX

• 1x Mina Sunrise
• 1x USB Type-C charging cable
• 1x User manual

PRODUCT OVERVIEW

1. 1. Push-button  

   • Push once to turn ON the lamp
   • Push and hold to enable sunset mode
   • Push to stop the alarm when it sounds

2. Lamp

3. 1. Touch area (Metallic surface)
      • Touch to light up the screen
      • Touch to snooze when the alarm sounds

4. Date

5. 1. Time

6. Alarm time

7. 1. Alarm ON & Alarm sound ON

8. Alarm ON & Sunrise mode ON

9. 1. Night mode (works only when the device is plugged to a power source)
      • Press the Time setting button ( ) once to turn ON/OFF the night mode

10. Battery & Charging indicator

11. 1. USB-C port for charging & battery status

12. Minus button
    • Press to adjust settings
    • Press to decrease lamp brightness

13. 1. Power button
       • Press and hold to turn ON/OFF the device

14. Time setting button
    • Press and hold to enter Time setting

15. 1. Alarm setting button
       • Press and hold to enter Alarm setting
       • Press once to enable/disable alarm

16. Plus button
    • Press to adjust settings
    • Press to increase lamp brightness

17. Screen brightness
    • Press and hold to enter the screen brightness setting

(A)  To maintain the LED screen on permanently, please plug Mina Sunrise into a power source using a 5V DC power adapter (not supplied) and the supplied USB-C cable.

(B)  Mina Sunrise has a built-in battery that allows it to operate without being plugged into a power source.
When not plugged in, the LED display will be ON for 5 seconds and then dim for 15 seconds before going into standby mode.
Simply touch the metallic surface to turn ON the screen.
When the battery is low, the battery icon will continue to flash until the unit is completely empty. It takes about 5 hours to fully charge Mina Sunrise.

FALL ASLEEP FASTER …
Mina Sunrise lamp makes it easier for you to fall asleep. Its soothing orange light gradually changes to a red light.
The wavelengths of red light stimulate the production of melatonin. Melatonin is a natural hormone that promotes better sleep. The brain releases more melatonin at nightfall and tends to release less when you are exposed to light.

… AND WAKE UP NATURALLY
Mina Sunrise lamp provides a gentle wake-up call and a real feeling of lightness and well-being. The blue light emitted by Mina Sunrise plays a key role in regulating our circadian rhythm, also known as the body clock. This blue light causes a decrease in the production of melatonin, so you feel awake and ready to face the day.
The intensity gradually increases and eventually approaches a warm white light simulating sunrise.

TIME/DATE SETTING

1. 1. Press and hold the button. The time format display appears. Press or/and to select the time format (12h/24h) then press  button to confirm.

2. 1. HOUR digit flashes, press  or/and  buttons to adjust HOUR then press  button to confirm.

3. MINUTES digit flashes, press  or/and  to adjust MINUTES then press  button to confirm.

4. MONTH digit flashes, press  or/and  buttons to adjust MONTH then press  button to confirm.
   Date format is set based on the selected time format.

5. DAY digit flashes, press  or/and  buttons to adjust DAY then press  button to confirm.
   Note: During the time/date setting, if no operation is performed after 10 seconds, the unit automatically returns to the time display.

ALARM SETTING
Full setting

1. Press and hold the button. HOUR digit flashes, press  or/and  to adjust the HOUR then press button to confirm.

2. MINUTES digit flashes, press  or/and  to adjust MINUTES then press button to confirm.

3. To set the alarm clock mode, press  or/and  to select between the following modes and press button to confirm:
   Mode 1:  Wake-up by light & sound (  &  icons appear on-screen)
   Mode 2:  Wake-up light only (  icon appear on-screen)
   Mode 3:  Sound only (  icon appear on-screen)

4. If you’ve selected Mode 1 or Mode 3, press  or/and  to choose from the 5 available alarm tones. Press the button to confirm.

5. Press  or/and  to set the volume. Press button to confirm.

Alarm time setting only

1. Double press the button. HOUR digit flashes, press  or/and  to adjust the HOUR then press button to confirm.
2. MINUTES digit flashes, press  or/and  to adjust MINUTES then press button to confirm.

To snooze, touch the metallic surface. To confirm that snooze is ON, the Alarm icon will continue to flash. The alarm will sound again after 6 minutes.
To turn off the alarm when it sounds, press the top of the lamp once.
To disable alarm mode, press the button. Repeat to turn it back on.  and/or  icons appear on screen when the alarm is ON, and and/or  icon are not visible when the alarm is OFF.

SCREEN BRIGHTNESS ADJUSTMENT

1. Press and hold the button.
2. Press or/and to adjust the brightness then press button to confirm.
   – SC 1 Lowest level
   – SC 2
   – SC 3
   – SC 4
   – SC 5 Highest Level
   – SC Auto The brighter the environment, the higher the brightness level. In the dark or in darkness, the brightness level gradually decreases until it reaches level 1 if the room is in complete darkness.

SUNSET MODE

• Press and hold the top of the lamp to turn ON sunset mode. Sunset mode lasts 30 minutes.
• To disable the sunset mode at any time and get back to normal mode, press the top of the lamp once.

NIGHT MODE
Important note: This feature only works when the device is plugged in.
The alarm clock goes into night mode (black screen) from 10:00 pm to 8:00 AM, allowing you to fall asleep more comfortably and creating a better sleeping environment.
To disable/enable the night mode, press the  button once. When the night mode is enabled, a icon appears on-screen.
To turn on the screen when the device is in night mode, touch the metallic surface.
The LED backlight will be ON for 5 seconds and then dim for 15 seconds before going into standby mode.

LAMP FEATURES

• Press the top of the lamp to turn it ON
• There are 9 colors options you can select by simply touching the top of the lamp
• To adjust brightness, press or/and  buttons
• To turn OFF the light, wait 3 seconds after the color selection then touch again
  The last color set will be remembered for next time

SAFETY PRECAUTIONS

• Make sure to respect the technical specifications for charging and never use a power adapter delivering more voltage output than the one indicated to avoid any irreversible damage.
• Do not store your device in very hot or cold areas. It is recommended to use your device at room temperatures.
• Do not expose your device to direct sunlight for an extended period of time.
• Keep your device out of reach of small children to prevent danger.
• Please stop using your device immediately if it bulges, leaks, or smells, and contact the Manufacturer for service.
• Do not attempt to service, repair or disassemble the device by yourself.

PRODUCT SPECIFICATIONS

Material: Aluminium/ABS
Weight: 0.52 lb / 235 g
Dimensions: Ø 4.33 x 4.33″ / Ø 11 x 11 cm
Max lumen output: 70 lm
Color temperature: 2800-6000K Max.
LED lifetime: > 30000h
Input port: DC 5V
Battery type: Li-polymer
Battery capacity: 2000 mAh
Battery voltage: 3.7V
Normal usage time:

• Alarm with sound mode only: Up to 4 months
• Alarm with sunrise mode only: Up to 1 month
• Lamp (light function only): Up to 24 hours

Battery type: Li-polymer
Battery capacity: 2000 mAh
Battery life may vary depending on functions used, brightness, alarm settings and other parameters.
Charging system: USB Type-C
Charging time (USB Type-C): approx. 5 hours
Operating temperature: 0°C – +45°C
International warranty: 1 year

EUROPEAN UNION
CE DIRECTIVE
LEXON hereby declares that the device follows the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU.
The original EU declaration of conformity may be found at:  https://www .lexon-design.com/assets/certifications-ce-minasunrise.pdf

UK CONFORMITY ASSESSMENT
The object of the declaration described above is in conformity with the essential requirements and other relevant provisions of the UK radio Equipment Regulations 2017 (SI 2017/1206).
The original UK declaration of conformity may be found at:  https://www .lexon-design.com/assets/certifications-ukca-minasunrise.pdf

DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. 1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.

Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

RF exposure statements
This equipment complies with FCC radiation exposure requirement set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

CANADA COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003 & ICES-005.
RF exposure statements
This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual.

125, Avenue des Champs-Elysées – 75008 Paris – FRANCE
All brands or product names are or may be trademarks or their resoective owners.
Pictures and specifications are not contractual. Assembled in China.
lexon-design.com | @lexondesign

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>