hitron NOVA1214 GPON ONU with Wi-Fi 6 and Voice HGU User Guide

hitron NOVA1214 GPON ONU with Wi-Fi 6 and Voice HGU

Product Information

• Product Name: HITRON NOVA-1214
• Model Number: 6NOVA1214.01G

Product Usage Instructions

Step 1: Connect to the Fiber Port
Connect the fiber cable from the cable outlet to the GPON port.

Step 2: Check Box Contents

Look in the box and make sure you have the following:

• NOVA-1214 device
• Cat6.a Ethernet cable
• Dispositivo NOVA-1214
• Cable Ethernet Cat6.a

Step 3: Connect Power Adapter
Connect the power adapter to the POWER port.

Step 4: Connect Computer to Device
Use the Ethernet cable that came with the device to connect your computer to one of the LAN ports.

Step 5: Connect Computer to Wireless Network

Connect your computer to the wireless network using the provided SSID and password:

• 2G SSID: NOVA-1124-2G
• 5G SSID: NOVA-1124-5G
• WiFi Password: 12345678
• SSID de 2.4 GHz: NOVA-1124-2G
• SSID de 5 GHz: NOVA-1124-5G
• Contraseña WiFi: 12345678

Congratulations!
You have successfully set up your device. If you encounter any problems, refer to the LED display section below to help identify the problem.

Safety Warnings

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Check the box contents

STEP 1: Look in the box and make sure you have the following:

Connect to the fiber port

STEP 2: Connect the fiber cable from the cable outlet to the GPON port.

Turn on the power

STEP 3: Connect the power adapter to the POWER port.

Connect the phone to the voice port

STEP 4: Use the telephone cable to connect vour telephone to the TELEPHONE port and wait for dial tone before using.

Connect your computer to the device

STEP 5: Use the Ethernet cable that came with the device to connect vour computer to one of the LAN ports.

Connect your computer to wireless network/ Conecte

STEP 6: Connect the wireless devices with SSID and correct password. If you have not changed them, the default values are indicated on the sticker at the bottom of the device.

• Connect your wireless devices by WPS. Access the configuration interface (see step 6), go to the Wireless page to enable WPS, then press Save changes.
• Press this button to start the procedure for setting up WPS. Press WPS button of your wireless clients within coverage area in two minutes to allow joining the wireless network.

Installation complete

Congratulations!
You have successfully set up your device. If you have any problems, see the LED display section below to help identify the problem.

LED display

Power| Green

Dark

| The device is power-on.

Power off.

---|---|---

Alarm

| Red-Steady Rojo Constante

Red-Blinking

| Abnormal Anormal

Loss of signal of GPON.

 | Green-Steady| This device is registered with the ISP.
GPON

GPON

| Green-Blinking| This device is trying to register with the ISP.
 | Dark| The device is not yet registered with the ISP.
 | Green-Steady| LAN interface is activated.
Ethernet| Green-Blinking| There is traffic on LAN interface.
 | Dark Oscuro| LAN interface is disabled.
 | Green-Steady| Wi-Fi interface is activated.
---|---|---
Wi-Fi| Green-Blinking| There is traffic on Wi-Fi
 | Dark| Wi-Fi interface is disabled.
 | Green-Steady| Phone is online.
Phone| Green-Blinking| Phone is in use.
 | Dark| Phone is offline.
 | Green-Steady| WPS is activated.
WPS| Green-Blinking| WPS is pairing.
 | Dark Oscuro| WPS is disabled.

Safety warnings

WARNING

• Risk of electrical shock. Do not expose the device to water or moisture.
• The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors.
• Keep the device in an environment between 0°C ~ 40°C (32°F ~104°F). To avoid overheating, do NOT place any object on top of the device.
• Do not restrict the flow of air around the device. The manufacturer assumes no liabilities for damage caused by any improper use of the device.

DISCLAIMER

• The manufacturer assumes no liabilities with respect to the contents of this document.
• The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments.
• Specifications subject to change without notice.

CAUTION
The fiber distribution system should be grounded (earthed) in accordance with ANS/NFPA 70, the National Electrical Code (NEC).

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

COPYRIGHT © 2023 HITRON TECHNOLOGIES, INC.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>