hitron CGNDP3M Coax Network Testing Meter User Guide
- June 4, 2024
- Hitron
Table of Contents
User Guide
CGNDP3M Coax Network Testing Meter
| Battery Level
---|---
| Battery Charging Indicator
| Wi-Fi Indicator
| DOCSIS Registration Indicator
| Upstream Ranging Indicator
| Downstream Scan Indicator
| Power Indicator
S-Reset: Short press for a reboot
S-Reset: 6+ seconds for factory reset (When Wi-Fi is broadcasting)
H-Reset: Force power off
| | Charge:100%
---|---|---
75%
50%
25%
(Red/Green/Blue blinking) <10%
| | Charging
---|---|---
| | Wi-Fi Broadcasting
| | Registration Complete
| Registration in Progress
| | Upstream Ranging Complete
| Upstream Ranging
| | Downstream Lock Complete
| Scanning Downstream
| | Power on
| Port1: AC Detected
| Port2: AC Detected
- Attach barrel and jumper to Port 1 and route jumper through jumper guide. Terminate Port 2 if not in use (Port 2 is designed for advanced functions).
- Power on CGNDP3M and connect to CGNDP3M Wi-Fi under device settings :
SSID: CGNDP3M-(last 4 of MAC)
Password: default key
For certification statements and Safety Warnings, please go to:
us.hitrontech.com/cgndp3m
Keep this card inside the carrying bag