Lakeland e27847 Catering Dispenser Instructions
- June 13, 2024
- LAKELAND
Table of Contents
1000 – Instructions for use
e27847 Catering Dispenser
HOW TO LOAD
1. Unlock at front to open lid, push lever to the left.
2. To open the body, with your index fingers press firmly inwards and upwards
on the arrows at each end with thumbs on top for support.
3. Attach the stabilizers (rubber feet) to the base, instructions inside with
stabilizers.
4. Push one yellow roll insert onto the bar.
5. Place cling or foil refill on to the bar and twist clockwise onto insert.
6. Push second yellow roll insert onto other end of bar and twist clockwise
into the refill.
7. Place loaded bar into the dispenser.
8. Pull out about 8″ (20cm) of material (unwinding from the back of the
roll), lay this over the top of the lid.
9. Close, making sure both ends lock securely.
Your dispenser is now ready to use.
HOW TO USE
WM1000 is designed so that it may be held in one hand, or wall mounted.
– To ensure film is “tangle free” use close to the item to be wrapped, not
while attached to the wall.
– Pull out desired length of material and simply squeeze or press lid closed
to cut.
– Allow lid to spring open again to release material.
The end is ready for next use.
HANDY TIPS
– Store in aclean area away from cooking steam.
Lock closed, they look neat on a counter.
Model 1000 will fit most drawers.
– Holes in the base allow for storing on the wall, if required.
– Keep the feet clean to prevent slipping.
- When cleaning the clamping surfaces use a soft cloth and warm water. Beware of the concealed sharp blade.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>