Connects2 29-CTUVW01 Infodapter Compatible with Fender OEM Amplified System User Guide

June 13, 2024
Connects2

Connects2 29-CTUVW01 Infodapter Compatible with Fender OEM Amplified

System

Connects2-29-CTUVW01-Infodapter-Compatible-with-Fender-OEM-Amplified-System-
PRO

Product Information

The 29-CTUVW01 Infodapter is a vehicle interface designed for Volkswagen vehicles. It is compatible with the following models:

  • Volkswagen EOS 2009 – 2016
  • Volkswagen Golf 2008 – 2013
  • Volkswagen Multivan 2010 – 2015
  • Volkswagen Passat* 2010 – 2015
  • Volkswagen Polo 2009 – 2014
  • Volkswagen Scirocco 2011 – 2015
  • Volkswagen Sharan 2010 – 2015
  • Volkswagen Tiguan 2011 – 2015
  • Volkswagen Touran 2010 – 2015

*Only compatible with Models with White MFD and Fender OEM Amplified System. The Infodapter allows vehicle information such as climate control, parking sensors, and heated seats to be displayed on any aftermarket head unit with a rear camera input. It also enables the use of steering wheel controls with almost every steering wheel control compatible head unit on the market.

ABOUT
The Infodapter for VW vehicles allows vehicle information such as climate control, parking sensors and heated seats to be displayed on any aftermarket head unit with rear camera input. The Infodapter also allows the use of the steering wheel controls with almost every steering wheel control compatible head unit on the market.

DIP SWITCH SETTINGS

Up = Off, Down = OnConnects2-29-CTUVW01-Infodapter-Compatible-with-Fender-
OEM-Amplified-System-1

  1. On = Pioneer head units. Off = All other head units
  2. Setting for reverse camera. On = PAL, Off = NTSC. The default setting is Off (NTSC).
  3. Resets the display settings back to default. If the display settings have been manipulated in a way that it is no longer possible to make adjustments, change the DIP switch #3 from Off to On and back. This will reset the screen settings to the factory defaults. During this procedure the screen background will change to red. While the background is red, no settings can be made.
  4. Not applicable.

INTERFACE CONNECTIONS

Connects2-29-CTUVW01-Infodapter-Compatible-with-Fender-OEM-Amplified-
System-2

STEERING WHEEL CONTROLS

  • À Speech Button
  • B/C Track Up/Down

CONFIGURATION MENU

To access the menu, push and hold the speech button for 2 seconds (Fig. 3). This will enable the configuration menu. To navigate through the menu options use the Track Up/ Track Down buttons. To select a menu option, push the speech button once.

  • Screen Size/Position
    Make sure all 4 corner markers are touching the corners of the aftermarket head unit display.Connects2-29-CTUVW01-Infodapter-Compatible-with-Fender-
OEM-Amplified-System-5

  • Picture Settings
    Adjust brightness, contrast, and colour saturation.

  • Vehicle Settings

    • Driver Position – Select Left or Right depending upon vehicle configuration.
    • **Amplifier Settings** – This setting can be used to adjust the gain of the aftermarket head unit, to match the the OEM amplifer volume. (Note this option is only available when an OEM amplifier is detected in the vehicle)
  • Preferences

    • Park Assist Version – Select according to the colour configuration of the park assist fitted to the vehicle.
    • Camera Connected – Select Yes if an optional camera is connected.
    • *Reverse Priority –* Select which image (Camera or Park Assist) will be shown by default when reversing. The driver can select the desired image by pushing the Speech button (Fig.3) while reversing. (Note this option is only available when Camera Connected is set to Yes)
    • Park Brake Source – Set to one of the following:
    • Brake – Park brake output active when park brake is on.
    • Speed – Park brake output active when speed is less than 3KMH
    • Always On – Park brake output always active.
    • Restore factory settings – Reverts all Infodapter settings to factory defaults. (This does not restore vehicle settings)

Legal Information
Please consult the relevant road traffic laws governing the country in which this product is being operated. No liability is accepted for material damage, loss or personal injury, directly or indirectly, from installation and operation of this product. This product should only be operated when safe to do so.

Vehicle Application

  • Volkswagen EOS 2009 – 2016
  • Volkswagen Golf 2008 – 2013
  • Volkswagen Multivan 2010 – 2015
  • Volkswagen Passat* 2010 – 2015
  • Volkswagen Polo 2009 – 2014
  • Volkswagen Scirocco 2011 – 2015
  • Volkswagen Sharan 2010 – 2015
  • Volkswagen Tiguan 2011 – 2015
  • Volkswagen Touran 2010 – 2015

Only for Models with White MFD
*Compatible with Fender OEM Amplified System

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Connects2 User Manuals

Related Manuals