kogan KAMN27F7SB 27 Full HD 75hz Freesync Frameless Monitor User Guide

kogan KAMN27F7SB 27 Full HD 75hz Freesync Frameless Monitor

Product Information

• Product Name: 27 Full HD 75Hz FreeSync Frameless Monitor
• Model Number: KAMN27F7SB
• Resolution : 1920 x 1080

Safety & Warnings

• Do not touch the monitor’s panel when not plugged in.
• HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks of HDMI Licensing Administrator, Inc.

Components

• Monitor
• Stand arm
• Stand base
• Power adapter
• M4x10mm Screw
• VESA Screws M4x10mm (x4)
• HDMI cable
• User guide

Overview

• Menu Button (1 ): Navigates down in the menu
• Down Button (2 ): Navigates up in the menu
• Up Button (3 ): Exits the menu
• Exit Button (4 ): Turns the monitor On/Off

Monitor Ports

• HDMI port (6)
• VGA port (7)
• 3.5mm headphone jack (8)
• Power input port (9)

Assembly

1. Carefully remove the monitor, stand connector, and stand base from the box.
2. Attach the stand base to the stand arm using the supplied M4x10mm screw.
3. Insert the stand assembly into the rear of the monitor and push down until firmly connected.
4. Lift the monitor up straight and remove the bottom foam. Stand the monitor up on the installed base.

VESA Mount
VESA mounting pattern: 75x75mm, screw size M4.

Note: VESA mount or mounting accessories are NOT included.

1. Open the box, remove the monitor with the protection foam attached, and gently place it on a desktop or table.
2. Remove any extra parts or foam covering the rear of the monitor.
3. Press the release button to remove the stand plate. If the monitor was already attached to the stand, remove the stand.
4. Assemble the mount according to instructions provided with the mount.

Connectivity
Before connecting the monitor to your computer, please shut down the computer and ensure the monitor is switched off.

• Power Cable : Connect the included power adapter to the monitor power port, then connect the other end to a power outlet.
• HDMI : Connect the supplied HDMI cable from the computer’s HDMI port to the monitor’s HDMI port.
• VGA : Connect a VGA cable (not included) from the computer to the monitor’s VGA port.
• Earphones : Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.
• Note: If audio devices are plugged into the monitor and computer, there will be no sound.

Operation

1. Connect the monitor to the input device via HDMI/VGA.
2. Connect the power adapter to the monitor and then connect the other end directly to a power outlet.
3. Use the power button to turn the monitor on.

On-Screen Display (OSD) Menu
The OSD menu allows adjustments to various settings for the monitor. To access the OSD, press the menu button on the monitor. Note: When using the monitor for the first time, the monitor will configure the optimal settings automatically.

1. Press the menu button to enter the OSD menu.
2. Use the up and down buttons to browse the settings. With the desired setting highlighted, press the menu button to enter the sub-menu.
3. Use the up and down buttons to highlight the desired sub-menu item and press the menu button to adjust the parameters.
4. Adjust the parameters using the up and down buttons and press the menu button to save the changes.

SAFETY & WARNINGS

• Read all instructions before using the appliance and retain for reference.
• Only use the power adapter provided with this product.
• Do not use the power adapter with any other products
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the monitor casing.
• To clean the screen, turn the monitor off, unplug it and wait for it to cool completely. Then, wipe it with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• Do not cover or block the ventilation holes in the monitor casing.
• Do not insert any object or spray any liquid into the vents.
• Do not place the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

COMPONENTS

OVERVIEW

| Button| Description
---|---|---
**1| ** Menu|

• Opens the OSD menu.
• Enters sub menus.

2| Down| Navigates down in the menu
3| Up| Navigates up in the menu
4| Exit| Exits the menu
5| Power| Turns the monitor On/Off.

Monitor Ports

• HDMI port
• VGA port
• 3.5mm headphone jack
• Power input port

ASSEMBLY

WARNING: The panel of the monitor is fragile. Keep the foam underneath the screen while assembling the stand.

1. Carefully remove the monitor, stand connector and stand base from the box.
2. Attach the stand base to the stand arm using the supplied M4x10mm screw.
3. Insert the stand assembly into the rear of the monitor and push down until firmly connected.
4. Lift the monitor up straight and remove the bottom foam. Stand the monitor up on the installed base.

VESA MOUNT

VESA mounting pattern 75x75mm, screw size M4.

Note: VESA mount or mounting accessories are NOT included.

1. Open the box, remove the monitor with the protection form attached and gently place it on a desktop or table.
2. Remove any extra parts or foam covering the rear of the monitor.
3. Press the release button to remove the stand plate. If the monitor was already attached to the stand, remove the stand.
4. Assembly the mount according to instructions provided with the mount.

CONNECTIVITY
Before connecting the monitor to your computer, please shut down the computer and ensure the monitor is switched off.

Power Cable
Connect the included power adapter to the monitor power port, then connect the other end to a power outlet.

HDMI
Connect the supplied HDMI cable from the computer’s HDMI port to the monitor’s HDMI port.

VGA
Connect a VGA cable (not included) from the computer to the monitor’s VGA port.

Earphones
Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.

Note: If audio devices are plugged into the monitor and computer, there will be no sound.

OPERATION

1. Connect the monitor to the input device via HDMI/ VGA.
2. Connect the power adapter to the monitor and then connect the other end directly to a power outlet.
3. Use the power button to turn the monitor on.

FreeSync

• Ensure your computer has FreeSync capability and the graphics drivers are fully up to date.
• After connecting, you will receive a prompt to enable FreeSync on your computer. If you do not receive the prompt, you may need to enable FreeSync in your graphics card menu.
• See your graphics card manufacturer’s documentation for instructions on how to enable FreeSync.

On-Screen display (OSD) menu
The OSD menu allows adjustments to various settings for the monitor. To access the OSD press the menu button on the monitor.

Note: When using the monitor for the first time, the monitor will configure the optimal settings automatically.

1. Press the menu “ ”button to enter the OSD menu.
2. Use the up and down buttons to browse the settings. With the desired setting highlighted, press the menu “ ” button to enter the sub-menu.
3. Use the up and down buttons to highlight the desired sub-menu item and press the menu “ ” button to adjust the parameters.
4. Adjust the parameters using the up and down buttons and press the menu “ ” button to confirm the settings and exit the current menu.
5. Press the exit “ ” button to exit the OSD menu.

OSD Menu

BRIGHTNESS

| Picture| 0–100| Adjusts the display brightness
Contrast| 0–100| Adjusts the display contrast
Backlight| 0–100| Adjusts the display backlight
Low blue| On| Enable/Disable blue light reduction
Off
ECO modes| Standard, Text, Game, Movie, FPS, RTS| Preset colour modes
DCR| On| Turns the DCR function on/off
Off

IMAGE

| H. position| 0–100| Adjusts the horizontal position of the display (VGA only)
V. position| 0–100| Adjusts the vertical position of the display (VGA only)
Clock| 0–100| Adjusts the clock setting
Phase| 0–100| Adjusts the phase setting
Aspect| Wide (16:9), 4:3| Sets the aspect ratio
Freesync| On/Off| Turns display Freesync on/off
** COLOURS| Warm mode| Red/Green/Blue| Adjust RGB levels
Cool mode| Red/Green/Blue| Adjust RGB levels
User mode| Red/Green/Blue| Adjust RGB levels
HDR mode| On/Off| Enable/disables HDR mode
Main Menu| Sub- Menu| Options| Description**
---|---|---|---

OSD Setting Reset

| ****

**** Language

| English,

Polski, Italiano, Nederlands

| **** Sets OSD language
OSD H-Position| 0–100| Adjusts OSD horizontal position
OSD V-Position| 0–100| Adjusts OSD vertical position
OSD

Transparency

| 0–100| Set OSD overall transparency
OSD time out| 5~60| Set how long the OSD remains open after last input
RESET| Image| None| Restore VGA image defaults
Colour| None| Automatically configure VGA colour settings
Reset| None| Restore factory defaults
Power down| On| Enable/disable power down function
Off
Time count| 10-90min| Adjust time count
MISC| Signal source| VGA/HDMI| Adjust input source

COLOUR MODES & GAMEPLUS

Colour Modes
There are various pre-set colour modes suited for various use cases available on this monitor. These can be accessed by pressing the up button.

The modes include the following

• Standard (suitable for most activities)
• Game (best suited general gaming)
• RTS (best suited when playing real-time strategy games)
• FPS (best suited when playing first-person shooter games)
• Movie (best suited when watching movies)
• Text (best suited when reading text)

GamePlus
The GamePlus menu allows you to change the appearance of crosshairs that appear when gaming. Press the exit “ ” button to access the GamePlus options.

SPECIFICATIONS

Audio
Speakers| N/A
Audio Out| Yes
Accessories
Adapter| Yes
HDMI Cable| Yes
Additional Functions
Low Blue Light| Yes
Flicker Free| Yes
Physical Dimensions
Dimensions (W/ Stand)| 614x459x183mm
Dimensions (W/ o Stand)| 614x363x53mm
Net weight| 3.84kg
Gross weight| 5.29kg

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>